- 您現在的位置：買賣IC網 > PDF目錄1992 > CYW305OXC (Silicon Laboratories Inc)IC CLOCK W305 SOLANO 56SSOP PDF資料下載
參數資料
| 型號： | CYW305OXC |
| 廠商： | Silicon Laboratories Inc |
| 文件頁數： | 3/20頁 |
| 文件大小： | 0K |
| 描述： | IC CLOCK W305 SOLANO 56SSOP |
| 標準包裝： | 26 |
| 類型： | 時鐘/頻率發生器 |
| PLL： | 是 |
| 主要目的： | Intel CPU 服務器 |
| 輸入： | 晶體 |
| 輸出： | 時鐘 |
| 電路數： | 1 |
| 比率 - 輸入:輸出： | 1:15 |
| 差分 - 輸入:輸出： | 無/是 |
| 頻率 - 最大： | 200MHz |
| 電源電壓： | 2.375 V ~ 3.465 V |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 56-BSSOP（0.295"，7.50mm 寬） |
| 供應商設備封裝： | 56-SSOP |
| 包裝： | 管件 |
W305B
...................... Document #: 38-07262 Rev. *B Page 11 of 20
Byte 11: Recovery Frequency N-Value Register
Bit
Name
Default
Pin Description
Bit 7
ROCV_FREQ_N7
0
If ROCV_FREQ_SEL is set, W305B will use the values programmed in
ROCV_FREQ_N[7:0] and ROCV_FREQ_M[6:0] to determine the recovery
CPU output frequency.when a Watchdog timer time-out occurs
The setting of FS_Override bit determines the frequency ratio for CPU,
SDRAM, AGP and SDRAM. When it is cleared, W305b will use the same
frequency ratio stated in the Latched FS[4:0] register. When it is set, W305B
will use the frequency ratio stated in the SEL[4:0] register.
W305B supports programmable CPU frequency ranging from 50 MHz to
248 MHz.
W305Bwill change the output frequency whenever there is an update to either
ROCV_FREQ_N[7:0] and ROCV_FREQ_M[6:0]. Therefore, it is recom-
mended to use Word or Block write to update both registers within the same
SMBus bus operation.
Bit 6
ROCV_FREQ_N6
0
Bit 5
ROCV_FREQ_N5
0
Bit 4
ROCV_FREQ_N4
0
Bit 3
ROCV_FREQ_N3
0
Bit 2
ROCV_FREQ_N2
0
Bit 1
ROCV_FREQ_N1
0
Bit 0
ROCV_FREQ_N0
0
Byte 12: Recovery Frequency M-Value Register
Bit
Name
Default
Pin Description
Bit 7
ROCV_FREQ_SEL
0
ROCV_FREQ_SEL determines the source of the recover frequency when a
Watchdog timer time-out occurs. The clock generator will automatically switch
to the recovery CPU frequency based on the selection on ROCV_FREQ_SEL.
0 = From latched FS[4:0]
1 = From the settings of ROCV_FREQ_N[7:0] & ROCV_FREQ_M[6:0]
Bit 6
ROCV_FREQ_M6
0
If ROCV_FREQ_SEL is set, W305B will use the values programmed in
ROCV_FREQ_N[7:0] and ROCV_FREQ_M[6:0] to determine the recovery
CPU output frequency.when a Watchdog timer time-out occurs
The setting of FS_Override bit determines the frequency ratio for CPU,
SDRAM, AGP and SDRAM. When it is cleared, W305b will use the same
frequency ratio stated in the Latched FS[4:0] register. When it is set, W305B
will use the frequency ratio stated in the SEL[4:0] register.
W305B supports programmable CPU frequency ranging from 50 MHz to
248 MHz.
W305B will change the output frequency whenever there is an update to either
ROCV_FREQ_N[7:0] and ROCV_FREQ_M[6:0]. Therefore, it is recom-
mended to use Word or Block write to update both registers within the same
SMBus bus operation.
Bit 5
ROCV_FREQ_M5
0
Bit 4
ROCV_FREQ_M4
0
Bit 3
ROCV_FREQ_M3
0
Bit 2
ROCV_FREQ_M2
0
Bit 1
ROCV_FREQ_M1
0
Bit 0
ROCV_FREQ_M0
0
Byte 13: Programmable Frequency Select N-Value Register
Bit
Name
Default
Pin Description
Bit 7
CPU_FSEL_N7
0
If Prog_Freq_EN is set, W305B will use the values programmed in
CPU_FSEL_N[7:0] and CPU_FSEL_M[6:0] to determine the CPU output
frequency. The new frequency will start to load whenever CPU_FSELM[6:0]
is updated.
The setting of FS_Override bit determines the frequency ratio for CPU,
SDRAM, AGP and SDRAM. When it is cleared, W305B will use the same
frequency ratio stated in the Latched FS[4:0] register. When it is set, W305B
will use the frequency ratio stated in the SEL[4:0] register.
W305B supports programmable CPU frequency ranging from 50 MHz to
248 MHz.
Bit 6
CPU_FSEL_N6
0
Bit 5
CPU_FSEL_N5
0
Bit 4
CPU_FSEL_N4
0
Bit 3
CPU_FSEL_N3
0
Bit 2
CPU_FSEL_N2
0
Bit 1
CPU_FSEL_N1
0
Bit 0
CPU_FSEL_N0
0
相關PDF資料 |
PDF描述 |
|---|---|
| DAC5674IPHPG4 | IC DAC 14BIT 400MSPS 48-HTQFP |
| DAC7621EBG4 | IC SNGL 12BIT PARALLEL D/A 20SSO |
| DAC7801KPG4 | IC DUAL 12BIT CMOS DAC 24-DIP |
| DAC8043AESZ | IC DAC 12BIT MULT SRL INP 8SOIC |
| DAC8043GP | IC DAC 12BIT MULTIPLY CMOS 8-DIP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CYW305OXCT | 功能描述:時鐘發生器及支持產品 Legacy-Sys Clk Intel RSolano Chip W305B RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56 |
| CYW311OXC | 功能描述:時鐘發生器及支持產品 Sys Clk VIATM Pro266 DDR Chipset W311 DS RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56 |
| CYW311OXCT | 功能描述:時鐘發生器及支持產品 Sys Clk VIATM Pro266 DDR Chipset W311 DS RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56 |
| CYW312OXC | 制造商:SPECTRALINEAR 制造商全稱:SPECTRALINEAR 功能描述:FTG for VIA⑩ K7 Series Chipset with Programmable Output Frequency |
| CYW312OXCT | 制造商:CYPRESS 制造商全稱:Cypress Semiconductor 功能描述:FTG for VIA⑩ K7 Series Chipset with Programmable Output Frequency |
發布緊急采購，3分鐘左右您將得到回復。