參數資料
    型號: CY37512VP256-83BGC
    文件頁數: 4/62頁
    文件大小: 1782K
    代理商: CY37512VP256-83BGC
    Ultra37000 CPLD Family
    Document #: 38-03007 Rev. *C
    Page 4 of 62
    Low-Power Option
    Each logic block can operate in high-speed mode for critical
    path performance, or in low-power mode for power conser-
    vation. The logic block mode is set by the user on a logic block
    by logic block basis.
    Product Term Allocator
    Through the product term allocator, software automatically
    distributes product terms among the 16 macrocells in the logic
    block as needed. A total of 80 product terms are available from
    the local product term array. The product term allocator
    provides two important capabilities without affecting perfor-
    mance: product term steering and product term sharing.
    Product Term Steering
    Product term steering is the process of assigning product
    terms to macrocells as needed. For example, if one macrocell
    requires ten product terms while another needs just three, the
    product term allocator will “steer” ten product terms to one
    macrocell and three to the other. On Ultra37000 devices,
    product terms are steered on an individual basis. Any number
    between 0 and 16 product terms can be steered to any
    macrocell. Note that 0 product terms is useful in cases where
    a particular macrocell is unused or used as an input register.
    Product Term Sharing
    Product term sharing is the process of using the same product
    term among multiple macrocells. For example, if more than
    one output has one or more product terms in its equation that
    are common to other outputs, those product terms are only
    programmed once. The Ultra37000 product term allocator
    allows sharing across groups of four output macrocells in a
    variable fashion. The software automatically takes advantage
    of this capability—the user does not have to intervene.
    Note that neither product term sharing nor product term
    steering have any effect on the speed of the product. All worst-
    case steering and sharing configurations have been incorpo-
    rated in the timing specifications for the Ultra37000 devices.
    Ultra37000 Macrocell
    Within each logic block there are 16 macrocells. Macrocells
    can either be I/O Macrocells, which include an I/O Cell which
    is associated with an I/O pin, or buried Macrocells, which do
    not connect to an I/O. The combination of I/O Macrocells and
    buried Macrocells varies from device to device.
    Buried Macrocell
    Figure 2
    displays the architecture of buried macrocells. The
    buried macrocell features a register that can be configured as
    combinatorial, a D flip-flop, a T flip-flop, or a level-triggered
    latch.
    The register can be asynchronously set or asynchronously
    reset at the logic block level with the separate set and reset
    product terms. Each of these product terms features program-
    mable polarity. This allows the registers to be set or reset
    based on an AND expression or an OR expression.
    Clocking of the register is very flexible. Four global
    synchronous clocks and a product term clock are available to
    clock the register. Furthermore, each clock features program-
    mable polarity so that registers can be triggered on falling as
    well as rising edges (see the Clocking section). Clock polarity
    is chosen at the logic block level.
    Figure 1. Logic Block with 50% Buried Macrocells
    I/O
    CELL
    0
    PRODUCT
    TERM
    ALLOCATOR
    I/O
    CELL
    14
    MACRO-
    CELL
    0
    MACRO-
    CELL
    1
    MACRO-
    CELL
    14
    0
    16
    PRODUCT
    TERMS
    72 x 87
    PRODUCT TERM
    ARRAY
    80
    36
    8
    16
    TO
    PIM
    FROM
    PIM
    7
    3
    2
    MACRO-
    CELL
    15
    2
    to cells
    2, 4, 6 8, 10, 12
    0
    16
    PRODUCT
    TERMS
    0
    16
    PRODUCT
    TERMS
    0
    16
    PRODUCT
    TERMS
    相關PDF資料
    PDF描述
    CY37512VP352-83BGC
    CY37128P160-125GMB ASIC
    CY37128P160-83GMB ASIC
    CY37128P160-83UMB ASIC
    CY37128VP84-154JC ASIC
    相關代理商/技術參數
    參數描述
    CY38050V208-125NTC 制造商:Cypress Semiconductor 功能描述:CPLD QUANTUM38K 72K GATES 768 MCRCLLS COMM 0.18UM 2.5V/3.3V - Bulk
    CY38050V208-125NTI 制造商:Cypress Semiconductor 功能描述:CPLD QUANTUM38K 72K GATES 768 MCRCLLS IND 0.18UM 2.5V/3.3V 2 - Bulk
    CY38050V208-83NTC 制造商:Cypress Semiconductor 功能描述:CPLD QUANTUM38K 72K GATES 768 MCRCLLS COMM 0.18UM 2.5V/3.3V - Bulk
    CY38050V208-83NTI 制造商:Cypress Semiconductor 功能描述:CPLD QUANTUM38K 72K GATES 768 MCRCLLS IND 0.18UM 2.5V/3.3V 2 - Bulk
    CY38100V208-125NTI 制造商:Cypress Semiconductor 功能描述:CPLD QUANTUM38K 144K GATES 1536 MCRCLLS IND 0.18UM 2.5V/3.3V - Bulk