參數資料
型號: CY2277APAC-1M
廠商: CYPRESS SEMICONDUCTOR CORP
元件分類: XO, clock
英文描述: 6x86, K6 Clock Synthesizer/Driver for Desktop Mobile PCs with Intel 82430TX and 2 DIMMs or 3 SO-DIMMs
中文描述: 66.67 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO48
封裝: 6 X 12 MM, TSSOP2-48
文件頁數: 16/19頁
文件大小: 206K
代理商: CY2277APAC-1M
CY2277A
Document #: 38-07332 Rev. *A
Page 16 of 19
Application Information
Clock traces must be terminated with either series or parallel termination, as is normally done.
Application Circuit
Summary
A parallel-resonant crystal should be used as the reference to the clock generator. The operating frequency and C
of
this crystal should be as specified in the data sheet. Optional trimming capacitors may be needed if a crystal with a different
C
LOAD
is used. Footprints can be laid out for flexibility.
Surface mount, low-ESR, ceramic capacitors should be used for filtering. Typically, these capacitors have a value of 0.1
μ
F.
In some cases, smaller value capacitors may be required.
The value of the series terminating resistor satisfies the following equation, where R
is the loaded characteristic impedance
of the trace, R
out
is the output impedance of the clock generator (specified in the data sheet), and R
series
is the series terminating
resistor.
R
series
> R
trace
R
out
Footprints must be laid out for optional EMI-reducing capacitors, which should be placed as close to the terminating resistor
as is physically possible. Typical values of these capacitors range from 4.7 pF to 22 pF.
A Ferrite Bead
may
be used to isolate the Board V
from the clock generator V
island. Ensure that the Ferrite Bead offers
greater than 50
impedance at the clock frequency, under loaded DC conditions. Please refer to the application note
Layout
and Termination Techniques for Cypress Clock Generators
for more details.
If a Ferrite Bead is used, a 10
μ
F
22
μ
F tantalum bypass capacitor should be placed close to the Ferrite Bead. This capacitor
prevents power supply droop during current surges.
相關PDF資料
PDF描述
CY2277APAC-7M 6x86, K6 Clock Synthesizer/Driver for Desktop Mobile PCs with Intel 82430TX and 2 DIMMs or 3 SO-DIMMs
CY2283PVC-1 PentiumII, K6, 6x86 100-MHz Clock Synthesizer/Driver for Desktop PCs with ALI or VIA Chipsets, AGP and 3 DIMMs
CY2283PVC-2 PentiumII, K6, 6x86 100-MHz Clock Synthesizer/Driver for Desktop PCs with ALI or VIA Chipsets, AGP and 3 DIMMs
CY2291SI-XXX Three-PLL General Purpose EPROM Programmable Clock Generator
CY2291SC-XXX Three-PLL General Purpose EPROM Programmable Clock Generator
相關代理商/技術參數
參數描述
CY2277APAC4 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Interface IC
CY2277APAC-7M 制造商:CYPRESS 制造商全稱:Cypress Semiconductor 功能描述:6x86, K6 Clock Synthesizer/Driver for Desktop Mobile PCs with Intel 82430TX and 2 DIMMs or 3 SO-DIMMs
CY2277APVC-1 制造商:SPECTRALINEAR 制造商全稱:SPECTRALINEAR 功能描述:Pentium㈢/II, 6x86, K6 Clock Synthesizer/Driver for Desktop/ Mobile PCs with Intel㈢ 82430TX and 2 DIMMs or 3 SO-DIMMs
CY2277APVC-12 制造商:Cypress Semiconductor 功能描述:
CY2277APVC-12T 制造商:Cypress Semiconductor 功能描述: