
—1—
E96Z29-TE
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
Absolute Maximum Ratings
(Ta=25 °C)
Supply voltage
Input voltage
Output voltage
Operating temperature
Storage temperature
V
DD
V
I
V
O
Topr
Tstg
–0.3 to +7.0
–0.3 to +7.0
–0.3 to +7.0
–20 to +75
–40 to +125
V
V
V
°C
°C
(V
SS
=0 V)
Recommended Operating Conditions
Supply voltage
Input voltage
Operating temperature
V
DD
V
IN
Topr
4.75 to 5.25
V
SS
to V
DD
0 to +70
V
V
°C
I/O Pin Capacitance
Input pin
Output pin
C
I
C
O
11 (Max.)
11 (Max.)
pF
pF
Note)
Test conditions : V
DD
=V
I
=0 V, fM=1 MHz
Description
The CXD1914Q is a digital video encoder
designed for DVDs, set top boxes, digital VCRs and
other digital video equipment. This device accepts
ITU-R601 compatible Y, Cb and Cr data, and the
data are encoded to composite video and separate
Y/C video (S-video) signals and converted to
RGB/YUV signals.
Features
NTSC and PAL encoding modes
Composite video and separate Y/C video (S-video)
signal output
R, G, B/Y, U and V (BetaCam/SMPTE level) signal
output
8/16-bit pixel data input modes
13.5 Mpps pixel rate
10-bit 6-channel DAC
Supports I
2
C bus (400 kHz) and Sony SIO
Closed Caption (Line 21, Line 284) encoding
Macrovision Pay-Per-View copy protection system
: NTSC Rev. 7.0, PAL Rev. 6.1 (Note 1)
VBID encoding
WSS encoding
Supports non-interlace mode
Monolithic CMOS single 5.0 V power supply
100-pin plastic QFP
Digital Video Encoder
For the availability of this product, please contact the sales office.
100 pin QFP (Plastic)
CXD1914Q
(Note 1)
This device is protected by U.S. patent numbers 4631603, 4577216 and 4819098 and other intellectual property rights.
Use of the Macrovision anticopy process in the device is licensed by Macrovision for non-commercial home use only.
Reverse engineering or disassembly is prohibited.