參數資料
型號： CT2565-FP
廠商： Aeroflex Inc.
英文描述： CT2565 Bus Controller, Remote Terminal and BUS Monitor FOR MIL-STD-1553B
中文描述： CT2565總線控制器，遠程終端和總線監測的MIL - STD - 1553B總線
文件頁數： 23/31頁
文件大小： 356K
代理商： CT2565-FP
Aeroflex Circuit Technology
23
SCDCT2565 REV B 8/10/99 Plainview NY (516) 694-6700
TRANSMIT VECTOR WORD (10000)
MESSAGE SEQUENCE - TRANSMIT VECTOR WORD * STATUS VECTOR WORD
The CT2565 transmits a status word followed by a vector word. The contents of the vector word (from the subsystem) are enabled onto
DBO-DB15 with BUSREQ after the command transfer (same as data word in a normal transmit command).
ERROR CONDITIONS
1.
Invalid Command.
No response, command ignored.
2.
Command Followed by Data Word.
No status response. Bits set: message error (SW) High Word Count (BIT Word).
3.
T/R bit Set to Zero.
No status response. Bits set: message error (SW), T/R Error, Low Word Count (BIT Word).
4.
Zero T/R bit and Broadcast Address.
No status response. Bits set: message error, broadcast received (SW), Illegal Mode Code, T/R
Error, Low Word Count (BIT Word).
5.
Broadcast Address.
No status response. Bits set: message error, broadcast received (SW), Illegal Mode code, (BIT Word).
SYNCHRONIZE WITH DATA WORD (10001)
MESSAGE SEQUENCE - SYNCHRONIZE DATA WORD * STATUS
The data word received following the command word is transferred to the subsystem. The status register is then enabled and its contents
transferred onto the data bus and transmitted. If the command was broadcast, the broadcast received bit is set and status transmission is
suppressed.
ERROR CONDITIONS
1.
Invalid Command.
No response, command ignored.
2.
Command Not Followed by Data Word.
No status response. Bits set: message error (SW), Low Word Count (BIT Word).
3.
Command followed by too many Data Words.
No status response. Bits set: message error (SW), High Word Count (BIT word).
4.
Command T/R bit Set to One.
No status response. Bits set: message error (SW), T/R Error, High Word Count (BIT Word).
5.
Command, T/R bit Set to One and Broadcast Address.
No status response. Bits set: message error, broadcast received (SW), High
Word Count, T/R Error (BIT Word).
TRANSMIT LAST COMMAND (10010)
MESSAGE SEQUENCE = TRANSMIT LAST COMMAND * STATUS LAST COMMAND
The status and BIT word registers are not altered by this command. The SW contains the status from the previous command. The data
word transmitted contains the previous valid command (providing it was not another TRANSMIT LAST COMMAND).
ERROR CONDITIONS
1.
Invalid Command.
No response, command ignored.
2.
Command Followed by Data Word.
No status response. Bits set: message error (SW).
3.
T/R bit Set to Zero.
No status response. Bits set: message error (SW), T/R Error, Low Word Count (BIT Word).
4.
Zero T/R bit and Broadcast Address.
No status response. Bits set: message error, (SW), Illegal Mode Code T/R Error (BIT Word).
5.
Broadcast Address.
No status response. Bits set: message error, broadcast received (SW), Illegal Mode Code (BIT Word).
TRANSMIT BIT WORD (10011)
MESSAGE SEQUENCE - TRANSMIT BIT WORD * STATUS BIT WORD
The CT2565 transmits a status word followed by the BIT word . When activated, BITEN allows the subsystem to latch the BIT word on the
parallel data bus. The BIT word is not altered by this command; however, the next SW will reflect errors in this transmission.
ERROR CONDITIONS
1.
Invalid Command.
No response, command ignored.
2.
Command Followed by Data Word.
No status response. Bits set: message error (SW).
3.
T/R bit Set to Zero.
No status response. Bits set: message error (SW), T/R Error, Low Word Count (BIT Word).
4.
Zero T/R bit and Broadcast Address.
No status response. Bits set: message error, broadcast received (SW), Illegal Mode Code, T/R
Error, Low Word Count (BIT Word).
5.
Broadcast Address.
No status response. Bits set: message error, broadcast received (SW), Illegal Mode code, (BIT Word).
Table 8 – Mode Codes (continued)
相關PDF資料
PDF描述
CT2566 CT2566 MIL-STD-1553 to Microprocessor Interface Unit
CT2566-FP CT2566 MIL-STD-1553 to Microprocessor Interface Unit
CT2577 APPLICATION NOTE #108
CT2579 APPLICATION NOTE #108
CT2581-02-IN-F84 CT2578 / CT2581 SIMPLE REMOTE TERMINAL FOR MIL-STD-1553 / 1760 & McAir
相關代理商/技術參數
參數描述
CT2566 制造商:AEROFLEX 制造商全稱:AEROFLEX 功能描述:CT2566 MIL-STD-1553 to Microprocessor Interface Unit
CT25664AA1067 制造商:Crucial Technology 功能描述:DRAM Module DDR2 SDRAM 2Gbyte 240UDIMM 制造商:Micron Consumer Products Group 功能描述:2GB, 240-PIN DIMM, DDR2 PC2-850 - Bulk
CT25664AA667 制造商:Micron Consumer Products Group 功能描述:2GB 240-PIN DIMM DDR2 PC2-5 - Bulk
CT25664AA800 制造商:Crucial Technology 功能描述:DRAM Module DDR2 SDRAM 2Gbyte 240DIMM 制造商:Micron Consumer Products Group 功能描述:2GB, 240-PIN DIMM DDR2 - Bulk
CT25664AA800T 制造商:Crucial Technology 功能描述:2GB, 240-PIN DIMM, DDR2 PC2-64 制造商:Micron Consumer Products Group 功能描述:2GB, 240-PIN DIMM, DDR2 PC2-6400, NON-ECC, - Bulk
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*