• 參數資料
    型號: CT2-MI2PATD33C5
    廠商: JDS UNIPHASE CORP
    元件分類: 光收發
    英文描述: FIBER OPTIC TRANSCEIVER, 1430-1580nm, 2700Mbps(Tx), 2700Mbps(Rx), PANEL MOUNT, LC CONNECTOR
    文件頁數: 7/8頁
    文件大?。?/td> 202K
    代理商: CT2-MI2PATD33C5
    7
    OC-48 SFP TRANSCEIVER
    Specifications
    Parameter
    SR
    IR-1
    IR-2
    LR-1
    LR-2
    Average output power1
    Minimum
    -10 dBm
    -5 dBm
    -2 dBm
    Typical
    -7 dBm
    -2.5 dBm
    0 dBm
    0.3 dBm
    Maximum
    -3 dBm
    0 dBm
    1.5 dBm
    3 dBm
    BOL power output1
    Minimum
    -9 dBm
    -4 dBm
    -1 dBm
    Typical
    -7 dBm
    -2.5 dBm
    0 dBm
    0.3 dBm
    Maximum
    -4 dBm
    -1.0 dBm
    1 dBm
    2 dBm
    TX operating wavelength
    Minimum
    1266 nm
    1260 nm
    1430 nm
    1280 nm
    1500 nm
    Typical
    1310 nm
    1550 nm
    1310 nm
    1550 nm
    Maximum
    1360 nm
    1580 nm
    1335 nm
    1580 nm
    Spectral width2
    Typical
    -
    0.3 nm
    Maximum
    4 nm
    1 nm
    Side mode suppression ratio (DFB laser)3
    Minimum
    -
    30 dB
    Extinction ratio4 (BOL)
    Minimum
    9.0 dB
    Typical
    11.0 dB
    10.5 dB
    10.0 dB
    10.5 dB
    10.0 dB
    Maximum
    13.5 dB
    11.5 dB
    13.0 dB
    11.5 dB
    Extinction ratio4 (EOL)
    Minimum
    8.2 dB
    Maximum
    -
    12.0 dB
    -
    12.0 dB
    Optical rise and fall times (20 to 80%)
    Maximum
    200 ps
    Eye mask of optical output
    Compliant with GR-253 and ITU-T G.957
    Eye mask margin (filtered)5
    Minimum
    5%
    10%
    Typical
    15%
    Jitter generation (peak-to-peak)6
    Maximum
    70 mUIP-P
    70 mUIP-P 70 mUIP-P
    Jitter generation (rms)6
    Maximum
    7 mUIrms
    Power output with transmitter disabled
    Typical
    -50 dBm
    Maximum
    -40 dBm
    Receiver sensitivity (BOL, BER=1 x 10-10, ER=10 dB)
    Minimum
    -21 dBm
    -31 dBm
    Typical
    -23 dBm
    -32 dBm
    Receiver sensitivity (EOL, BER=1 x 10-10, ER=8.2 dB)
    Minimum
    -19 dBm
    -29 dBm
    Maximum received optical power
    Minimum
    -3 dBm
    0 dBm
    -8 dBm
    Receiver operating wavelength
    Minimum
    1260 nm
    Maximum
    1620 nm
    Link status response time
    Minimum
    3 s
    Typical
    50 s
    Maximum
    100 s
    Optical path penalty
    Maximum
    1 dB
    2 dB
    Dispersion
    Maximum
    12 ps/nm
    -
    800 ps/nm
    -
    1600 ps/nm
    Receiver reflectance
    Maximum
    -27 dB
    Minimum optical return loss
    Minimum
    -
    -24 dB
    BER floor
    Maximum
    10-15
    Reflect into Tx for <1 dB degradation at the receiver
    Maximum
    -24 dB
    -
    -24 dB
    Standard case temperature
    -5 to 75 °C
    Extended case temperature
    -40 to 85 °C
    Bit rate
    155 to 2700 Mb/s
    1. Measured as fiber coupled power into a standard single mode fiber, typical connector repeatability is ±1 dB. LC duplex cables manufactured by Stratos are not
    recommended due to a potentially larger window of repeatability.
    2. Full spectral width measured 20 dB down from the central wavelength peak under fully modulated conditions.
    3. Ratio of the average output power in the dominant longitudinal mode to the power in the most significant side mode in fully modulated conditions.
    4. Ratio of logic 1 output power to logic 0 output power under fully modulated conditions with a PRBS 23 data pattern.
    5. GR-253-CORE, ITU-T, Recommendation G.957. Tested at STM1, STM4, STM16.
    6. Formatted OC-48 pattern with scrambled PRBS payload using an Agilent OmniBer as the optical source driving the CT2 optical receiver. The differential data outputs of
    this optical receiver are used as the electrical inputs for the CT2 transmitter which optically drives the OmniBer receiver input to complete the jitter test circuit. This is a 60
    second test as recommended in GR-253.
    相關PDF資料
    PDF描述
    CT2-MI2PATD51C5 FIBER OPTIC TRANSCEIVER, 1430-1580nm, 2700Mbps(Tx), 2700Mbps(Rx), PANEL MOUNT, LC CONNECTOR
    CT2-MI2PATD53C4 FIBER OPTIC TRANSCEIVER, 1430-1580nm, 2700Mbps(Tx), 2700Mbps(Rx), PANEL MOUNT, LC CONNECTOR
    CT2-MI2PATD53C5 FIBER OPTIC TRANSCEIVER, 1430-1580nm, 2700Mbps(Tx), 2700Mbps(Rx), PANEL MOUNT, LC CONNECTOR
    CT2-MI2PBTD31C4 FIBER OPTIC TRANSCEIVER, 1430-1580nm, 2700Mbps(Tx), 2700Mbps(Rx), PANEL MOUNT, LC CONNECTOR
    CT2-MI2PBTD33C5 FIBER OPTIC TRANSCEIVER, 1430-1580nm, 2700Mbps(Tx), 2700Mbps(Rx), PANEL MOUNT, LC CONNECTOR
    相關代理商/技術參數
    參數描述
    CT2-MI2PATD51C 制造商:JDSU 制造商全稱:JDS Uniphase Corporation 功能描述:OC-48 SFP Transceiver (Multirate, 1310 nm, and 1550 nm)
    CT2-MI2PATD53C 制造商:JDSU 制造商全稱:JDS Uniphase Corporation 功能描述:OC-48 SFP Transceiver (Multirate, 1310 nm, and 1550 nm)
    CT2-MI2PBTD31C 制造商:JDSU 制造商全稱:JDS Uniphase Corporation 功能描述:OC-48 SFP Transceiver (Multirate, 1310 nm, and 1550 nm)
    CT2-MI2PBTD33C 制造商:JDSU 制造商全稱:JDS Uniphase Corporation 功能描述:OC-48 SFP Transceiver (Multirate, 1310 nm, and 1550 nm)
    CT2-MI2PBTD51C 制造商:JDSU 制造商全稱:JDS Uniphase Corporation 功能描述:OC-48 SFP Transceiver (Multirate, 1310 nm, and 1550 nm)

      <tbody id="dpqkc"><noframes id="dpqkc">