
FINAL/PRODUCTION RELEASE
Information
- The information contained in
this document is about a product in fully tested and charactherized phase. All
features described herein are supported. Contact AMCC for updates to this
document and the latest product status.
Empowering Intelligent Optical Networks
Product Brief
DANUBE
SONET/SDH STS-48/STM-16 Framer/Pointer Processor
Part Number S4805CBI11, Revision 1.5, January 2003
SONET/SDH Mux/Demux, Transport Overhead Terminating
Transceiver and Pointer Processors for STS-48/STM-16 and
up to 4 x STS-12/STM-4 or 16 x STS-3/STM-1s.
Serial STS-12/STM-4 and STS-3/STM-1 interfaces.
Provisionable as SONET or SDH on a per line basis.
Provisionable as SOH/LOH pass-through or termination/regen-
eration device.
Built-in 192x48 cross-connects for STS-1 level cross-connec-
tion or add/drop, in both Mux and Demux directions.
Compliant with Bellcore GR-253, ITU G.707, and ANSI T1.105
-1995 standards.
Multiplex Direction:
Supports parallel STS-48/STM-16 or serial 4xSTS-12/STM-4
or serial 16xSTS-3/STM-1 inputs.
Provides a single STS-48/STM-16 output.
Pointer Processors for all valid input combinations of STS-48c/
AU-4-16c, STS-12c/AU-4-4c, STS-3c/AU-4, or STS-1/AU-3
signals.
Non-intrusive TOH monitoring for all inputs: STS-48, 4xSTS-12
or 16xSTS-3.
Provisionable pointer processor bypass available for STS-48 to
STS-48 operation (through-timing). Both a full bypass (no
frame regeneration) as well as a pointer processor bypass
(frame regeneration can be enabled) are provided.
TOH can be either terminated/regenerated, or transparently
passed-through device on a per-function basis, in both
through-timing and pointer processor applications.
For multiplex applications (4xSTS-12 or 16xSTS-3), the TOH
for the lower speed tributaries is passed-through in the unused
bytes of the outgoing STS-48 signal.
STS-48 frame regeneration on output side. Provisionable pass-
through or regeneration of defined TOH bytes.
Demultiplex Direction:
Supports a single STS-48/STM-16 input.
Provides parallel STS-48/STM-16, serial 4xSTS-12/STM-4 or
serial 16xSTS-3/STM-1 outputs.
Pointer Processor for all valid input combinations of STS-48c/
AU-4-16c, STS-12c/AU-4-4c, STS-3c/AU4, or STS-1/AU-3 sig-
nals.
Non-intrusive STS-48/STM-16 TOH monitor.
Provisionable pointer processor bypass available for STS-48 to
STS-48 operation (through-timing). Both a full bypass (no
frame regeneration) as well as a pointer processor bypass
(frame regeneration can be enabled) are provided.
TOH can be either terminated/regenerated, or transparently
passed-through the device on a per-function basis, in both
through-timing and pointer processor applications.
STS-48/STS-12/STS-3 frame regeneration on output side. Pro-
visionable pass-through or regeneration of defined TOH bytes.
Figure 1: Block Diagram
MX_HS_155CLK_OUT
DX_HS_622CLK_IN
DX_HS_622DATA_IN[1:4]
FRAM48
FRGN48
TOHDROP
ITOH
ITOH
TOH
DDX_REFCLK_IN
High Speed
Low Speed
Interface
Demux
Direction
Direction
D
A
C
R
W
R
B
I
MICROPROCESSOR I/F
R
A
U
4
T
4
R
PROC.
DX_HS_155FRM_IN
DEMUX
ITOH
M
M
M
D
D
D
S
D
D
D
D
M
M
M
PPROC.
M
M
D
D
D
4
4
4
4
D
D
DX_LS_PDATA_OUT[1:16]
MX_LSDATA_IN[1,5,9,13]
MX_LSCLK_IN[1,5,9,13]
M
M
G
T
T
T
T
T
T
S
D
S
o
o
P
S
MX_HS_622CLK_OUT
MX_LS_PCLK_IN
MX_LS_PDATA_IN[1:16]
DX_LSDATA_OUT[1,5,9,13]
DX_LSCLK_OUT_[1,5,9,13]
D
D
M
M
M
M
M
D
M
M
D