- 您現在的位置：買賣IC網 > PDF目錄295329 > CP-79-20BM1 PANEL MOUNT, CABLE TERMINATED, FEMALE, BNC CONNECTOR, CRIMP/SOLDER, JACK PDF資料下載
參數資料
| 型號： | CP-79-20BM1 |
| 元件分類： | RF連接器 |
| 英文描述： | PANEL MOUNT, CABLE TERMINATED, FEMALE, BNC CONNECTOR, CRIMP/SOLDER, JACK |
| 文件頁數： | 1/2頁 |
| 文件大?。?/td> | 106K |
| 代理商： | CP-79-20BM1 |
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 1-800-243.8814 Fax: 507-833-6287 www.cambridgeproducts.com
BNC 75 Ohm
Straight Crimp Type,
Rear Mount Bulkhead Jack -Solder or Crimp Contact - 3 Piece
PART NUMBER
CABLE TYPE
“A”
CP-79-20BM1
RG-179, 187
1.409 (35.80)
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick braid or
center conductor. Tin center conductor if contact will be
solder attached. Do not tin center conductor if contact is
to be crimp attached. A wire stripper of correct size is
recommended for this step. Slide heat shrink (as appli-
cable) and crimp sleeve onto jacket of cable.
3. Assemble contact onto cable as shown.
Solder Attachment: Solder contact to center conductor
through hole using a minimum amount of solder for a good
joint.
Crimp Attachment (where applicable): Crimp contact
to center conductor using recommended crimp hex.
4. Flare braid and slide body assembly over contact and
under braid. Then seat body assembly firmly onto con-
tact. The cable may have to be held in a clamping fixture.
Arrange braid uniformly around crimp stem. Slide crimp
sleeve forward and crimp using recommended crimp hex.
Slide heat shrink forward and shrink (as applicable).
Strip Dimensions
Crimp
Contact
Recommended
Part Number
Cable
“A”
“B”
“C”
Sleeve Hex
Crimp Hex
Crimp Tool
CP-79-20BM1
RG-179, 187
.315 (8.00)
.197 (5.00)
.138 (3.50)
.178 (4.52)
.066 (1.69)
CP-DCC-0908
相關PDF資料 |
PDF描述 |
|---|---|
| CP-88-10 | CABLE TERMINATED, MALE, BNC CONNECTOR, CRIMP, PLUG |
| CP-88-11 | CABLE TERMINATED, MALE, BNC CONNECTOR, CRIMP, PLUG |
| CP-88-1 | CABLE TERMINATED, MALE, BNC CONNECTOR, CRIMP, PLUG |
| CP-89-19M1 | PANEL MOUNT, CABLE TERMINATED, FEMALE, BNC CONNECTOR, CRIMP/SOLDER, JACK |
| CP-89-1 | CABLE TERMINATED, FEMALE, BNC CONNECTOR, CRIMP, JACK |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CP7920BM2 | 制造商:Emerson Connectivity Solutions 功能描述:75 OHM BNC STR.CRIMP BKHD 制造商:EMERSON NETWORK POWER 功能描述:Conn BNC F 0Hz to 2GHz 75Ohm Crimp ST Panel Mount Gold Over Nickel |
| CP-79-20BM2 | 功能描述:RF 連接器 75 OHM BULKHD JACK RoHS:否 制造商:Bomar Interconnect 產品:Connectors 射頻系列:BNC 型式:Jack (Female) 極性: 觸點電鍍:Gold 阻抗: 端接類型:Solder 主體類型:Straight Bulkhead 電纜類型: |
| CP-79-20-BM2 | 制造商:Johnson Components 功能描述:CONN BNC F 0HZ TO 2GHZ 75OHM CRMP ST PNL MNT NI/AU - Bulk |
| CP-79-20M2 | 功能描述:CONN BNV BULK PLATING RoHS:否 類別:連接器，互連式 >> 同軸，RF 系列:BNC 標準包裝:1 系列:OS-50 連接器類型:2.4mm（APC-2.4，OS-50） 連接器類型:插孔，母插口 觸點終端:壓接及焊料 阻抗:- 安裝類型:自由懸掛 緊固型:有螺紋 纜線組:IW 1501 頻率 - 最大:- 特點:- 顏色:- 包裝:散裝 其它名稱:744-1391 |
| CP7922AT | 制造商:Cypress Semiconductor 功能描述:TRUETOUCH - Trays 制造商:Cypress Semiconductor 功能描述:TRAY / TrueTouch |
發布緊急采購，3分鐘左右您將得到回復。