參數資料
型號： COP8SGA0DWF8
廠商： National Semiconductor Corporation
英文描述： LMH0346 3 Gbps HD/SD SDI Reclocker with Dual Differential Outputs; Package: LLP; No of Pins: 24
中文描述： 8位的CMOS基于ROM和OTP微控制器具有8K到32K的內存，2個比較器和USART
文件頁數： 43/62頁
文件大?。?/td> 913K
代理商： COP8SGA0DWF8
12.0 MICROWIRE/PLUS
(Continued)
arrangement with the internal clock source is called the
Master
mode
of
operation.
MICROWIRE/PLUS arrangement with an external shift clock
is called the Slave mode of operation.
The CNTRL register is used to configure and control the
MICROWIRE/PLUS mode. To use the MICROWIRE/PLUS,
the MSEL bit in the CNTRL register is set to one. In the
master mode, the SK clock rate is selected by the two bits,
SL0 and SL1, in the CNTRL register. Table 10 details the
different clock rates that may be selected.
Similarly,
operating
the
TABLE 10. MICROWIRE/PLUS
Master Mode Clock Select
SL1
0
0
1
SL0
0
1
x
SK Period
2 x t
C
4 x t
C
8 x t
C
Where t
C
is the instruction cycle clock
12.1 MICROWIRE/PLUS OPERATION
Setting the BUSY bit in the PSW register causes the
MICROWIRE/PLUS to start shifting the data. It gets reset
when eight data bits have been shifted. The user may reset
the BUSY bit by software to allow less than 8 bits to shift. If
enabled, an interrupt is generated when eight data bits have
been shifted. The device may enter the MICROWIRE/PLUS
mode either as a Master or as a Slave. Figure 28shows how
two microcontroller devices and several peripherals may be
interconnected using the MICROWIRE/PLUS arrangements.
WARNING
The SIO register should only be loaded when the SK clock is
in the idle phase. Loading the SIO register while the SK clock
is in the active phase, will result in undefined data in the SIO
register.
Setting the BUSY flag when the input SK clock is in the
active phase while in the MICROWIRE/PLUS is in the slave
mode may cause the current SK clock for the SIO shift
register to be narrow. For safety, the BUSY flag should only
be set when the input SK clock is in the idle phase.
12.1.1 MICROWIRE/PLUS Master Mode Operation
In the MICROWIRE/PLUS Master mode of operation the
shift clock (SK) is generated internally. The MICROWIRE
Master always initiates all data exchanges. The MSEL bit in
the CNTRL register must be set to enable the SO and SK
functions onto the G Port. The SO and SK pins must also be
selected as outputs by setting appropriate bits in the Port G
configuration register. In the slave mode, the shift clock
stops after 8 clock pulses. Table 11 summarizes the bit
settings required for Master mode of operation.
10131732
FIGURE 28. MICROWIRE/PLUS Application
C
www.national.com
43
相關PDF資料
PDF描述
COP8SGA0DWF9 LMH0356 3 Gbps HD/SD SDI Reclocker with 4:1 Input Mux and FR4 EQs; Package: LLP; No of Pins: 48
COP8SGA528D3 LMH0356 3 Gbps HD/SD SDI Reclocker with 4:1 Input Mux and FR4 EQs; Package: LLP; No of Pins: 48
COP8SGA528D6 LMH0356 3 Gbps HD/SD SDI Reclocker with 4:1 Input Mux and FR4 EQs; Package: LLP; No of Pins: 48
COP8SGA528D7 LMH1251 YP B P R to RGBHV Converter and 2:1 Video Switch
COP8SGA528D8 LMH1251 YP B P R to RGBHV Converter and 2:1 Video Switch; Package: TSSOP; No of Pins: 24
相關代理商/技術參數
參數描述
COP8SGA0DWF9 制造商:NSC 制造商全稱:National Semiconductor 功能描述:8-Bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and USART
COP8SGA0VEJ3 制造商:NSC 制造商全稱:National Semiconductor 功能描述:8-Bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and USART
COP8SGA0VEJ6 制造商:NSC 制造商全稱:National Semiconductor 功能描述:8-Bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and USART
COP8SGA0VEJ7 制造商:NSC 制造商全稱:National Semiconductor 功能描述:8-Bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and USART
COP8SGA0VEJ8 制造商:NSC 制造商全稱:National Semiconductor 功能描述:8-Bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and USART
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*