- 您現在的位置：買賣IC網 > PDF目錄298952 > CMM2321-AK-000T (MIMIX BROADBAND INC) 2300 MHz - 2500 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER PDF資料下載
參數資料
| 型號： | CMM2321-AK-000T |
| 廠商： | MIMIX BROADBAND INC |
| 元件分類： | 放大器 |
| 英文描述： | 2300 MHz - 2500 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| 封裝： | POWER, SOP-8 |
| 文件頁數： | 2/4頁 |
| 文件大?。?/td> | 466K |
| 代理商： | CMM2321-AK-000T |
2.3 to 2.5 GHz
1 Watt Power Amplifier
Page 2 of 4
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice.
2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
CMM2321-AK
August 2007 - Rev 05-Aug-07
Typical Performance
Application Information
The CMM2321 is a two stage amplifier that requires
a positive and negative supply voltage for proper operation. It
is essential when turning on the device that the negative sup-
ply be applied before the positive supply. When turning the
device off, the positive supply should be removed before the
negative supply is removed.
The CMM2321 can be operated over a range of sup-
ply voltages and bias points. It is important that the maximum
power dissipation of the package be observed at all times.
Design Considerations
Biasing A negative voltage supply is needed to bias the gates
of the 2-stage GaAs FET power amplifier. Gate 1 bias is
applied through pin 3 (Vg1) and gate 2 bias is applied through
pin 4 (Vg2). Under most operating conditions gates 1 and 2
may be tied together. The positive supply voltage is applied to
pins 5 and 6 (Vd2) and pin 7 (Vd1). The negative voltage
supply should be adjusted to achieve a drain current of 600
mA with no RF input power to obtain a P1dB of approximate-
ly 30.5 dBm.
Matching Circuits Input and output matching circuits are
required. The schematic and the PCB layout for the test board
are shown on Page 3. The matching circuits for the
CMM2321 are highlighted on the PCB layout.
A single shunt capacitor is used to match the output.
Their placement and value provide tuning. Vd2 is fed through
a /4 trace. All other capacitors shown in the schematic are
used for decoupling.
Note: Circuit board 8251 is a multiple-use test board.
The portions of the board that are used with the CMM2321
are shown as solid traces on the board layout drawing on Page
3. The interface/conversion points in the evaluation board
schematic are shown. These connection points may not be
labeled identically on Mimix’s PB-CMM2321 evaluation
board. Contact the factory for assistance in translating the
external match to a specific application.
Supply Ramping To obtain the necessary power ramp, sup-
ply side switching should be used. Both drain voltages should
be tied together and ramped to produce the required power vs.
time response.
Thermal
1. The copper pad on the backside of the CMM2321 must be
soldered to the ground plane.
2. All 8 leads of the package must be soldered to the appropri-
ate electrical connection.
3. A large ground plane area with plated thru-holes as shown
on the PCB layout should be used as a backside connection.
Contact the factory for a copy of a manufacturing application
note containing more detailed information.
Gain vs Frequency
Gain,
dB
Frequency, GHz
2.40
2.45
2.50
22
18
19
20
21
3.6 V
4.5 V
4.8 V
Saturated Power Output vs Frequency
(P IN = +14 dBm)
Frequency, GHz
Power
Out,
dBm
16
21
26
31
2.40
2.45
2.50
3.6 V
4.5 V
4.8 V
36
Power Output vs Power Input @ 2.45 GHz
Power Input, dBm
Power
Out,
dBm
16
21
26
31
36
-2
2
6
14
10
4.8 V
Efficiency vs Power Input @ 2.45 GHz
Power Input, dBm
Efficiency,
%
0
25
50
75
0
2
6
14
10
4.8 V
相關PDF資料 |
PDF描述 |
|---|---|
| CMM4000-BD | 2000 MHz - 18000 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER |
| CMM6025-AH | 250 MHz - 6000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
| CMRD6055E | TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX |
| CMT2-3-R | 1 ELEMENT, 12000 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR |
| CMT2-5-R | 1 ELEMENT, 6000 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CMM24513S4-91RSM | 功能描述:2.4GHz, 5.5GHz Puck RF Antenna 2.4GHz ~ 2.5GHz, 5.15GHz ~ 5.88GHz 6.6dBi Connector, SMA Male Panel Mount 制造商:laird technologies ias 系列:- 包裝:散裝 零件狀態:有效 頻率組:UHF（2 GHz ~ 3 GHz），SHF（f > 4 GHz） 頻率（中心/帶）:2.4GHz，5.5GHz 頻率范圍:2.4GHz ~ 2.5GHz，5.15GHz ~ 5.88GHz 天線類型:封裝 頻帶數:2 VSWR:2 回波損耗:- 增益:6.6dBi 功率 - 最大值:5W 特性:- 端接:連接器，SMA 公型 侵入防護:- 安裝類型:面板安裝 高度（最大值）:- 應用:- 標準包裝:1 |
| CMM24513S4-91RTN | 功能描述:2.4GHz, 5.5GHz Puck RF Antenna 2.4GHz ~ 2.5GHz, 5.15GHz ~ 5.88GHz 6.6dBi Connector, TNC Male Panel Mount 制造商:laird technologies ias 系列:- 包裝:散裝 零件狀態:有效 頻率組:UHF（2 GHz ~ 3 GHz），SHF（f > 4 GHz） 頻率（中心/帶）:2.4GHz，5.5GHz 頻率范圍:2.4GHz ~ 2.5GHz，5.15GHz ~ 5.88GHz 天線類型:封裝 頻帶數:2 VSWR:2 回波損耗:- 增益:6.6dBi 功率 - 最大值:5W 特性:- 端接:連接器，TNC 公型 侵入防護:- 安裝類型:面板安裝 高度（最大值）:- 應用:- 標準包裝:1 |
| CMM24513S6-91RSM | 功能描述:ANT LTE 6PORT OMNI MIMO CEILING 制造商:laird technologies ias 系列:* 零件狀態:有效 標準包裝:1 |
| CMM24513S6-91RTN | 功能描述:ANT LTE 6PORT OMNI MIMO CEILING 制造商:laird technologies ias 系列:* 零件狀態:有效 標準包裝:1 |
| CMM3 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
發布緊急采購，3分鐘左右您將得到回復。