• 參數資料
      型號: CM2540-7PV2AHF
      廠商: POWER-ONE INC
      元件分類: 電源模塊
      英文描述: 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE
      封裝: METAL, CASE M02, MODULE
      文件頁數: 11/25頁
      文件大小: 569K
      代理商: CM2540-7PV2AHF
      Cassette Style
      DC-DC Converters
      M Series
      Edition 01/01.2001
      19/25
      Table 18: Configuration of option A and option P
      Type of option
      AM...LM/CMZ...LMZ 1000
      AM...LM/CMZ...LMZ 2000
      AM...LM/CMZ...LMZ 3000
      Output 1
      Output 2
      Output 1
      Output 2
      Output 3
      Potentiometer 1
      yes
      no
      Test sockets
      yes
      no
      1 AM...LM 1000 types equipped with option P do not provide the R input simultaneously, pins 14 and 17 are not connected.
      -9 Extended Temperature Range
      Option -9 extends the operational ambient temperature
      range from –25...71
      °C (standard) to –40...71°C. The power
      supplies provide full nominal output power with convection
      cooling.
      A Test Sockets
      Test sockets (pin = 2 mm, distance d = 5.08 mm) are lo-
      cated at the front of the module. The output voltage is
      sensed at the connector pins inside the module.
      P Potentiometer
      Optionally built-in multi-turn potentiometers provide an out-
      put voltage adjustment range of minimum
      ±5% of U
      o nom
      and are accessible through holes in the front cover. Com-
      pensation of voltage drop across connector and wiring be-
      comes easily achievable. For output voltages
      Uo > Uo nom,
      the minimum input voltage according to:
      Electrical Input
      Data increases proportionally to Uo/Uo nom.
      Note: Potentiometers are not recommended for mobile ap-
      plications.
      Description of Options
      Table 17: Survey of options
      Option
      Function of option
      Characteristic
      –9
      Extended operational ambient temperature range
      TA = –40...71°C
      A
      Test sockets at front panel for check of output voltage
      Uo internally measured at the connector terminals
      E
      Electronic inrush current limitation circuitry
      Active inrush current limitation for CM, EM, LM, CMZ, LMZ
      P 1
      Potentiometer for fine adjustment of output voltage
      Adjustment range
      ±5% of U
      o nom, excludes R input
      F
      Input fuse built-in inside case
      Fuse not externally accessible
      H
      Enhanced output to case electric strength test voltage
      2000 V AC (standard: 1000 V AC)
      D 2
      Input and/or output undervoltage monitoring circuitry
      Safe data signal output (D0...D9)
      V 2 3
      Input and/or output undervoltage monitoring circuitry
      ACFAIL signal according to VME specifications (V0, V2, V3)
      1 Function R excludes option P and vice versa
      2 Option D excludes option V and vice versa
      3 Only available if main output voltage Uo1 = 5.1 V
      AC-DC
      front
      end
      DC-DC
      con-
      verter
      Mains
      Battery
      SELV
      Earth connection
      (class I)
      +
      ~
      10018
      Max. 250 V AC or
      400 (250) V DC
      Max. 250 V AC or
      400 (250) V DC
      Fuse
      Fig. 18
      Schematic safety concept.
      Use earth connection as per table:
      Safety concept leading
      to an SELV output circuit. Use fuse if required by the appli-
      cation. See also:
      Installation Instructions.
      Standards and Approvals
      AM...LM DC-DC converters correspond to class I equip-
      ment, while CMZ, DMZ, LMZ types correspond to class II
      equipment. All types are UL recognized according to UL
      1950, UL recognized for Canada to CAN/CSA C22.2 No.
      950-95 and LGA approved to IEC/EN 60950 standards.
      The units have been evaluated for:
      Building in
      Basic insulation between input and case and double or
      reinforced insulation between input and output, based on
      250 V AC and 400 V DC (class I equipment)
      Double or reinforced insulation between input and case
      and between input and output, based on 250 V AC and
      DC (class II equipment)
      Operational insulation between output(s) and case
      Operational insulation between the outputs
      The use in a pollution degree 2 environment
      Connecting the input to a primary or secondary circuit
      with a maximum transient rating of 2500 V
      The DC-DC converters are subject to manufacturing sur-
      veillance in accordance with the above mentioned UL,
      CSA, EN and with ISO 9001 standards.
      相關PDF資料
      PDF描述
      CM2540-7PV3H 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE
      CM3020-7PAH 3-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE
      CM3040-9EPAF 3-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE
      CMZ1001-7EPAH 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE
      CMZ1301-7ERV0A 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE
      相關代理商/技術參數
      參數描述
      CM2540-9 制造商:Power-One 功能描述:ACDC - Bulk
      CM2545X111B-00 制造商:未知廠家 制造商全稱:未知廠家 功能描述:2 Line Ferrite Common Mode Power Chokes
      CM2545X111R00 制造商:Laird Technologies Inc 功能描述:
      CM2545X111R-00 制造商:未知廠家 制造商全稱:未知廠家 功能描述:2 Line Ferrite Common Mode Power Chokes
      CM2545X171B-00 功能描述:CHOKE COMMON MODE 170 OHMS PCB RoHS:否 類別:濾波器 >> 共模扼流圈 系列:CM 標準包裝:2 系列:DKLP-1 濾波器類型:電源線 線路數:2 電感:40mH 電流:5A DC 電阻(DCR):126 毫歐 阻抗:- 安裝類型:底座安裝,引線 尺寸/尺寸:3.150" L x 3.150" W(80.00mm x 80.00mm) 高度(最大):2.000"(50.80mm) 封裝/外殼:- 工作溫度:-25°C ~ 100°C 包裝:散裝