
12
Cardinal Components, Inc., 155 Rt. 46 W,Wayne, NJ. 07470TEL: (973)785-1333 FAX: (973)785-0053
12
CARDINAL COMPONENTS
Low Profile Crystals
Cardinal “AT-Strip” low profile crystals come in a variety of heights and
specifications to accommodate all of our customers’ requirements.
Specifications:
Frequency Range:
3.579545 ~ 38.000 MHz
AT Cut Fundamental
25.000000 ~ 75.000 MHz
AT Cut 3rd Overtone
26.000000 ~ 42.000 MHz
BT Cut Fundamental
Operating Temperature:
-10°C ~ +70°C
Standard
-40°C ~ +85°C
Frequency Stability:
±100 ppm
± 50 ppm
Standard
± 30 ppm
± 15 ppm
Frequency Tolerance:
±100 ppm
(at 25°C)
± 50 ppm
Standard
± 30 ppm
± 10 ppm
Load Capacitance:
Standard 18 pF or series.
Please specify your required load.
Resistance:
Maximum resistance corresponds to frequency.
See chart below.
Standard:
Mode: Fundamental or 3rd Overtone
Shunt Capacitance: 7 pF Max
Aging: ± 5 ppm/year
Drive Level: 1.0 mW Max
Optional Features:
Formed Leads
Vinyl Sleeves
Insulator Pads
Radial Tape and Reel
Note 1: Not all combinations of the above tolerances, stabilities, and temperature
ranges are available. Consult the factory if your requirement is not standard.
Note 2: Heights of 3.5 mm (0.138) and 2.5 mm (0.098) are also available. Please
consult factory if required.
CLP
CLP3
Part Numbering Example: CLP X - A1 B2 C2 200 - 3.579545 D18 - 3
*
to meet customer requirements. Please contact our sales department if you don’t see exactly what you need.
EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT
Resistance Chart: All resistances are maximum values.
Frequency MHz
ESR(
) Mode/cut Frequency MHz
ESR (
)
Mode/cut
3.579545~4.999
200 Max
Fund./AT
15.000~15.999
60 Max
Fund./AT
5.000~5.999
150 Max
Fund./AT
16.000~23.999
50 Max
Fund./AT
6.000~7.999
120 Max
Fund./AT
24.000~30.000
40 Max
Fund./AT
8.000~8.999
90 Max
Fund./AT
24.000~48.000
40 Max
Fund./BT
9.000~9.999
80 Max
Fund./AT
24.576~29.999
150 Max
3rd Overtone/AT
10.000~14.999
70 Max
Fund./AT
30.000~75.000
100 Max
3rd Overtone/AT
Series
LOAD CAP.
D16,18,20,ETC.
DS = SERIES
D18
RESISTANCE
SEE CHART
BELOW
200
TOLERANCE
C1 = ±100
C2 = ± 50
C3 = ± 30
C4 = ± 10
C2
ADDED FEATURES
F = FORMED LEADS
W = VINYL SLEEVING
X = INSULATOR PAD
Y = THIRD LEAD
Z = TAPE AND REEL
BLANK = BULK PACK
X
SERIES
CLP
CLP3
CLP4
CLP5
CLP6
CLP
OPERATING TEMP.
A0 = -10°C ~
+60°C
A1 = -10°C ~
+70°C
A2 = -40°C ~
+85°C
A3 = -55°C ~ +125°C
A1*
STABILITY
B1 = ±100
B2 = ± 50
B3 = ± 30
B4 = ± 10
B2
FREQUENCY
3.579545
OVERTONE
BLANK: FUND.
-3: 3rd OT
-5: 5th OT
-7: 7th OT
-BT: BT Cut
- 3
CLP
CLP3
CLP4
CLP5
CLP6