CAT9555
http://onsemi.com
16
Example of Ordering Information (Notes 8 to 12) Prefix
Device #
Suffix
Business
CAT
9555
Product Number
9555
T2
T: Tape & Reel
1: 1,000 / Reel (SOIC Only)
2: 2,000 / Reel
Tape & Reel
HV6
Package
Group ID
I = Industrial (40°C to +85°C)
Temperature Range
I
G: NiPdAu
Blank: MatteTin
Lead Finish
G
W: SOIC
Y: TSSOP
HV6: TQFN
HT6: TQFN
8. All packages are RoHScompliant (Leadfree, Halogenfree).
9. The standard lead finish is MatteTin for SOIC and TSSOP packages and NiPdAu for TQFN package.
10.The device used in the above example is a CAT9555HV6IGT2 (TQFN, Industrial Temperature, NiPdAu, Tape & Reel, 2,000/Reel).
11. For additional package and temperature options, please contact your nearest ON Semiconductor Sales office.
12.For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
Table 12. ORDERING PART NUMBER
Part Number
Package
Lead Finish
CAT9555WI
SOIC
MatteTin
CAT9555WIT1
SOIC
MatteTin
CAT9555YI
TSSOP
MatteTin
CAT9555YIT2
TSSOP
MatteTin
CAT9555HV6IG
TQFN
NiPdAu
CAT9555HV6IGT2
TQFN
NiPdAu
CAT9555HT6IG
TQFN
NiPdAu
CAT9555HT6IGT2
TQFN
NiPdAu
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
CAT9555/D
ON Semiconductor is licensed by Philips Corporation to carry the I2C Protocol.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81357733850
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative