- 您現在的位置：買賣IC網 > PDF目錄384160 > BU9729 (Rohm CO.,LTD.) Segment-type LCD driver PDF資料下載
參數資料
| 型號： | BU9729 |
| 廠商： | Rohm CO.,LTD. |
| 英文描述： | Segment-type LCD driver |
| 中文描述： | 段型LCD驅動器 |
| 文件頁數： | 8/12頁 |
| 文件大?。?/td> | 146K |
| 代理商： | BU9729 |
8
Standard ICs
BU9729K
(6) Reset
1
1
0
LSB
: Don't Care
MSB
This command should be executed after the power supply has been turned on and before any other command is
executed. This command causes the BU9729K to initialize the following:
Display Off
Address Counter Reset
Description of functions
(1) Register
The BU9729K has an 8-bit command / data register. Serial data is read in 8-clock units of SCK.
If the data read into the register is displayed data (C / D is LOW at the eighth clock of SCK), it is written to the
DDRAM. If it is command data (C / D is HIGH at the eighth clock of SCK), it is output to the command decoder to
control the BU9729K.
(2) Address counter
The address counter indicates DDRAM addresses. When the Address Set command is written to a command or data
register, the address data is sent automatically to the address counter.
After data has been written to the DDRAM, the address counter increments automatically by either + 1 or + 2. The
amount by which the counter increments is determined automatically, based on the following status.
DDRAM 8-bit writing (C / D is LOW at the eighth clock of SCK)
→
+ 2
DDRAM 4-bit writing (C / D is HIGH at the eighth clock of SCK)
→
+ 1
When the address counter has counted to the address 11H, it becomes 00H the next time it is incremented.
(3) Display data RAM (DDRAM)
The display data RAM (DDRAM) is used to store display data. It has a capacity of 18 addresses
×
4 bits.
The relationship between the DDRAM and the display position is shown below.
DD RAM address
00
11
10
0F
01
02
03
04
05
06
07
·········
1
2
3
0
COM2
COM3
COM4
COM1
相關PDF資料 |
PDF描述 |
|---|---|
| BU9729K | Segment-type LCD driver |
| BU9817FV | 4-channel temperature sensor IC for PCs with I2C BUS interface |
| BU9831 | Non-volatile electronic potentiometer |
| BU9831F | Non-volatile electronic potentiometer |
| BU9929FV | I2C BUS interface, general purpose I/O ports with condition watching function |
相關代理商/技術參數 |
參數描述 |
|---|---|
| BU9729K | 制造商:ROHM 制造商全稱:Rohm 功能描述:Segment-type LCD driver |
| BU9735K | 制造商:ROHM 制造商全稱:Rohm 功能描述:72 Segment Driver |
| BU9735K-E | 制造商:ROHM 制造商全稱:Rohm 功能描述:液晶驅動系列分部72/80/96段段型液晶顯示器的LCD驅動器 |
| BU9735K-ZAE2 | 功能描述:IC LCD DRVR 72-SEG 18X4 QFP32 RoHS:是 類別:集成電路 (IC) >> PMIC - 顯示器驅動器 系列:- 標準包裝:9 系列:- 顯示器類型:LED 配置:- 接口:串行 數字或字符:- 電流 - 電源:10mA 電源電壓:4.75 V ~ 11 V 工作溫度:-40°C ~ 85°C 安裝類型:通孔 封裝/外殼:40-DIP（0.600"，15.24mm） 供應商設備封裝:40-PDIP 包裝:管件 產品目錄頁面:1083 (CN2011-ZH PDF) 其它名稱:576-1341 |
| BU97500FV-E2 | 制造商:ROHM 制造商全稱:Rohm 功能描述:Multifunction Segment Drivers |
發布緊急采購，3分鐘左右您將得到回復。