- 您現在的位置：買賣IC網 > PDF目錄256186 > BU-61865F4-192Z (DATA DEVICE CORP) 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 PDF資料下載
參數資料
| 型號： | BU-61865F4-192Z |
| 廠商： | DATA DEVICE CORP |
| 元件分類： | 微控制器/微處理器 |
| 英文描述： | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| 封裝： | 1 X 1 INCH, 0.155 INCH HEIGHT, FP-72 |
| 文件頁數： | 19/56頁 |
| 文件大小： | 321K |
| 代理商： | BU-61865F4-192Z |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁當前第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁
RT DESCRIPTOR STACK
The descriptor stack provides a chronology of all messages
processed by the Enhanced Mini-ACE RT. Reference Figures 6,
7, and 8. Similar to BC mode, there is a four-word block descrip-
tor in the Stack for each message processed. The four entries to
each block descriptor are the Block Status Word, Time Tag Word,
the pointer to the start of the message's data block, and the 16-
bit received Command Word.
The RT Block Status Word includes indications of whether a par-
ticular message is ongoing or has been completed, what bus
channel it was received on, indications of illegal commands, and
flags denoting various message error conditions. For the double
buffering, subaddress circular buffering, and global circular
buffering modes, the data block pointer may be used for locating
the data blocks for specific messages. Note that for mode code
commands, there is an option to store the transmitted or
received data word as the third word of the descriptor, in place of
the data block pointer.
The Time Tag Word provides a 16-bit indication of relative time
for individual messages. The resolution of the Enhanced Mini-
ACE's time tag is programmable from among 2, 4, 8, 16, 32, or
64 s/LSB. There is also a provision for using an external clock
input for the time tag (consult factory). If enabled, there is a time
tag rollover interrupt, which is issued when the value of the time
tag rolls over from FFFF(hex) to 0. Other time tag options include
the capabilities to clear the time tag register following receipt of
a Synchronize (without data) mode command and/or to set the
time tag following receipt of a Synchronize (with data) mode
command. For that latter, there is an added option to filter the
"set" capability based on the LSB of the received data word
being equal to logic "0".
RT INTERRUPTS
The Enhanced Mini-ACE offers a great deal of flexibility in terms
of RT interrupt processing. By means of the Enhanced Mini-
ACE's two Interrupt Mask Registers, the RT may be programmed
to issue interrupt requests for the following events/conditions:
End-of-(every)Message, Message Error, Selected (transmit or
receive) Subaddress, 100% Circular Buffer Rollover, 50%
Circular Buffer Rollover, 100% Descriptor Stack Rollover, 50%
Descriptor Stack Rollover, Selected Mode Code, Transmitter
Timeout, Illegal Command, and Interrupt Status Queue Rollover.
Interrupts for 50% Rollovers of Stacks and Circular Buffers.
The Enhanced Mini-ACE RT and Monitor are capable of issuing
host interrupts when a subaddress circular buffer pointer or stack
pointer crosses its mid-point boundary. For RT circular buffers,
this is applicable for both transmit and receive subaddresses.
Reference FIGURE 9. There are four interrupt mask and inter-
rupt status register bits associated with the 50% rollover
function:
(1) RT circular buffer;
(2) RT command (descriptor) stack;
(3) Monitor command (descriptor) stack; and
4) Monitor data stack.
26
The 50% rollover interrupt is beneficial for performing bulk data
transfers. For example, when using circular buffering for a partic-
ular receive subaddress, the 50% rollover interrupt will inform the
host processor when the circular buffer is half full. At that time,
the host may proceed to read the received data words in the
upper half of the buffer, while the Enhanced Mini-ACE RT writes
received data words to the lower half of the circular buffer. Later,
when the RT issues a 100% circular buffer rollover interrupt, the
host can proceed to read the received data from the lower half of
the buffer, while the Enhanced Mini-ACE RT continues to write
received data words to the upper half of the buffer.
Interrupt status queue. The Enhanced Mini-ACE RT, Monitor,
and combined RT/Monitor modes include the capability for gen-
erating an interrupt status queue. As illustrated in Figure 10, this
provides a chronological history of interrupt generating events
and conditions. In addition to the Interrupt Mask Register, the
Interrupt Status Queue provides additional filtering capability,
such that only valid messages and/or only invalid messages may
result in the creation of an entry to the Interrupt Status Queue.
Queue entries for invalid and/or valid messages may be disabled
by means of bits 8 and 7 of configuration register #6.
The interrupt status queue is 64 words deep, providing the capa-
bility to store entries for up to 32 messages. These events and
conditions include both message-related and non-message
related events. Note that the Interrupt Vector Queue Pointer
Register will always point to the next location (modulo 64) fol-
lowing the last vector/pointer pair written by the Enhanced Mini-
ACE RT.
The pointer to the Interrupt Status Queue is stored in the
INTERRUPT VECTOR QUEUE POINTER REGISTER (register
address 1F). This register must be initialized by the host, and is
subsequently incremented by the RT message processor. The
interrupt status queue is 64 words deep, providing the capability
to store entries for up to 32 messages.
The queue rolls over at addresses of modulo 64. The events that
result in queue entries include both message-related and non-
message-related events. Note that the Interrupt Vector Queue
Pointer Register will always point to the next location (modulo 64)
following the last vector/pointer pair written by the Enhanced
Mini-ACE RT, Monitor, or RT/Monitor.
Each event that causes an interrupt results in a two-word entry
to be written to the queue. The first word of the entry is the inter-
rupt vector. The vector indicates which interrupt event(s)/condi-
tion(s) caused the interrupt.
The interrupt events are classified into two categories: message
interrupt events and non-message interrupt events. Message-
based interrupt events include End-of-Message, Selected mode
code, Format error, Subaddress control word interrupt, RT
Circular buffer Rollover, Handshake failure, RT Command stack
rollover,
transmitter
timeout,
MT
Data
Stack
rollover,
MT Command Stack rollover, RT Command Stack 50% rollover,
MT Data Stack 50% rollover, MT Command Stack 50% rollover,
and RT Circular buffer 50% rollover. Non-message interrupt
相關PDF資料 |
PDF描述 |
|---|---|
| BU-61865G3-182Y | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61865G3-190Q | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61865G3-190W | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61865G4-120L | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61865G4-170Z | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| BU-61865G3-100 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
| BU-61865G3-110 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
| BU-61865G4-100 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
| BU-61865G4-110 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
| BU-61XXX | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MINIATURE ADVANCED COMMUNICATION ENGINE (MINI-ACE) AND MINI-ACE PLUS |
發布緊急采購，3分鐘左右您將得到回復。