<code id="5md8a"><optgroup id="5md8a"><rt id="5md8a"></rt></optgroup></code>
<label id="5md8a"></label>
<kbd id="5md8a"></kbd>
  • <ins id="5md8a"><noframes id="5md8a">
    參數資料
    型號: BU-61586S2-140
    廠商: DATA DEVICE CORP
    元件分類: 微控制器/微處理器
    英文描述: 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP70
    封裝: 1.900 X 1 INCH, 0.165 INCH HEIGHT, LOW PROFILE, CERAMIC, DIP-70
    文件頁數: 30/44頁
    文件大?。?/td> 298K
    代理商: BU-61586S2-140
    36
    TABLE 36. SIGNAL DESCRIPTIONS FOR BU-65170/61571, BU-61580/61585, BU-61586 (CONTINUED)
    (G, S or V PACKAGE)
    MISCELLANEOUS (7)
    Option for BU-65170/61580X6 and the BU-61585X6. Inhibits (disables) the respective (A/B) MIL-STD-1553 transmitter
    when asserted to logic “1.”
    36
    70
    TX_INH_A (I)
    External Time Tag Clock input. Use may be designated by bits 7, 8, and 9 of Configuration Register #2. When used it incre-
    ments the internal Time Tag Register/Counter. If not used, should be connected to +5V or ground.
    63
    TAG_CLK (I)
    27
    SSFLAG (I)/
    EXT_TRIG (I)
    45
    INCMD (O)
    Master Clear. Negative true Reset input, normally asserted low following power turn-on. Requires a minimum 100ns nega-
    tive pulse to reset all internal logic to its “power turn-on” state.
    7
    MSTCLR (I)
    16MHz (or 12MHz) clock input.
    19
    CLOCK IN (I)
    DESCRIPTION
    PIN
    SIGNAL NAME
    In Command. In BC mode, asserted low throughout processing cycle for each message. In RT mode or Message Monitor
    mode, asserted low following receipt of Command Word and kept low until completion of current message sequence. In
    Word Monitor mode, goes low following MONITOR START command, kept low while monitor is on-line, goes high following
    RESET command.
    Subsystem Flag or External Trigger input. In the Remote Terminal mode, asserting this input , will set the Subsystem Flag
    bit in the BU-65170/61580's RT Status Word. A low on the SSFLAG input overrides a logic “1" of the respective bit (bit 8) of
    Configuration Register #1. In the Bus Controller mode, an enabled external BC Start option (bit 7 of Configuration Register
    #1) and a low-to-high transition on this input will issue a BC Start command, starting execution of the current BC frame. In
    the Word Monitor mode, an enabled external trigger (bit 7 of Configuration Register #1) and a low-to-high transition on this
    input will issue a monitor trigger.
    TX_INH_B (I)
    POWER AND GROUND (8)
    -15(-12)VB
    CH. B Transceiver Ground
    37
    GNDB
    CH. B +5V Supply
    38
    CH. B -15V(-12V) Supply*
    36
    +5VB
    CH. A Transceiver Ground
    69
    GNDA
    CH. A +5V Supply
    68
    +5VA
    CH. A -15V(-12V) Supply*
    70
    -15(-12)VA
    Logic Ground
    18
    LOGIC GND
    Logic +5V Supply
    54
    +5V LOGIC
    DESCRIPTION
    PIN
    SIGNAL NAME
    RT ADDRESS (6)
    RTADP (I)
    44
    39
    RTAD0 (LSB) (I)
    40
    RTAD1 (I)
    Remote Terminal Address Inputs
    41
    RTAD2 (I)
    42
    RTAD3 (I)
    43
    RTAD4 (MSB) (I)
    DESCRIPTION
    PIN
    SIGNAL NAME
    1553 ISOLATION TRANSFORMER INTERFACE (4)
    Analog Transmit/Receive Input/Outputs. Connect directly to 1553 isolation transformers.
    35
    TX/RX-B (I/O)
    34
    TX/RX-B (I/O)
    2
    TX/RX-A (I/O)
    1
    TX/RX-A (I/O)
    DESCRIPTION
    PIN
    SIGNAL NAME
    NOTE: * No Connects (N/Cs) for BU-65170/61580 and TX_INH input for BU-65170/61580X6.
    Remote Terminal Address Parity. Must provide odd parity sum with RTAD4-RTAD0 in order for the RT to respond to non-
    broadcast commands.
    (TABLE 36 CONTINUES ON THE NEXT PAGE.)
    相關PDF資料
    PDF描述
    BU-61586S2-150 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP70
    BU-61586S3-132K 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP70
    BU-61586S5-170W 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP70
    BU-61586S6-140 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP70
    BU-61586V0-110L 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70
    相關代理商/技術參數
    參數描述
    BU61586V6-300 制造商:DDC 功能描述:MIL-STD-1553/ARINC BUS CONTROLLER/RTU, 70 Pin, Flat Pack
    BU-61588 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MINIATURE ADVANCED COMMUNICATION ENGINE (MINI-ACE) AND MINI-ACE PLUS
    BU-61588F0 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MINIATURE ADVANCED COMMUNICATION ENGINE (MINI-ACE) AND MINI-ACE PLUS
    BU-61588F3 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MINIATURE ADVANCED COMMUNICATION ENGINE (MINI-ACE) AND MINI-ACE PLUS
    BU-61588F3-102 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MIL-STD-1553/ARINC Bus Controller/RTU