N/AL.
8.240.
300.04
1/97
B64G
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
Warning
These products are intended for use in industrial compressed air
systems only. Do not use these products where pressures and
temperatures can exceed those listed under
‘Technical Data’
.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems, or other applications not
within published specifications, consult NORGREN.
Through misuse, age, or malfunction, components used in fluid
power systems can fail in various modes. The system designer is warned
to consider the failure modes of all component parts used in fluid power
systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the
system instructional manual if protection against a failure mode
cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
products.
Water vapor will pass through these units and will condense into
liquid if air temperature drops in the downstream system. Install an air
dryer if water condensation could have a detrimental effect on the
application.
Service Kits
Item
Type
Relieving
Non relieving
5 μm
25 μm
40 μm
Prismatic (standard)
Pyrex
Automatic
Manual
Part Number
4383-200
4383-201
4338-01
4338-99
4338-02
4380-040
4380-041
3000-97
684-84
Service kit
Replacement elements
Replacement Sight Glass
Replacement Drains
Service kit includes diaphragm assembly, valve assembly,
valve spring, louvre o-ring, bowl o-ring, drain seal.
143 (5.63)
114 (4.49)
8
8
11 (0.43)
14,5 (0.57)
9
3
4
1
Bracket Mounting
Use 8 mm (5/16") screws to mount bracket to wall.
Bracket Kit Reference
Item
Wall Bracket
Part Number
7
4504-50