- 您現在的位置：買賣IC網 > PDF目錄223435 > B45198P2157K106 (KEMET Corporation) Tantalum Chip Capacitors PDF資料下載
參數資料
| 型號： | B45198P2157K106 |
| 廠商： | KEMET Corporation |
| 英文描述： | Tantalum Chip Capacitors |
| 中文描述： | 鉭電容 |
| 文件頁數： | 5/15頁 |
| 文件大?。?/td> | 598K |
| 代理商： | B45198P2157K106 |
Cautions and warnings
When using tantalum capacitors with a manganese dioxide coating, the following cautions and
warnings should be taken into account:
Polarity
Because tantalum capacitors are polar capacitors, it is important to observe their polarity
markings (positive pole on the anode, negative pole on the cathode). Any incorrect polarity
resulting from the sum of the AC and DC voltage components must be smaller than or equal to
the permitted polarity reversal voltage. To avoid reducing their reliability, this voltage may only
occur for a short time, at most five times for a duration of one minute per hour.
Voltage
The maximum continuous voltage depends on the ambient temperature. Within the temperature
range of
55 to +85
°C, the rated voltage is equal to the maximum continuous voltage. Between
+ 85 and + 125
°C the maximum continuous voltage must be reduced linearly from the full rated
voltage to 2/3 of it (derating). At 150
°C (only B4519*P series) the voltage must be reduced to 1/2
and at 175
°C (only B4519*T series) to 1/3 of the rated voltage. Operation below the maximum
continuous voltage has a positive effect on the capacitor’s failure rate. The maximum continuous
voltage must not be exceeded.
All unfavourable operating conditions (such as possible line overvoltages, unfavourable
tolerances of the transformation ratio of the line transformer in the equipment, repeated
overvoltages when the equipment is switched on, high ambient temperatures) must be taken into
account when determining the operating voltage.
The surge voltage is the maximum voltage (peak value) that may be applied to the capacitor for
short periods, at most five times for a total duration of up to 1 minute per hour. The surge voltage
must not be applied for periodic charging and discharging in the course of normal operation and
cannot be part of the operating voltage. The permissible surge voltage for all capacitors in this
data book is 1.3 x the rated voltage. The occurrence of voltage impulses (transient voltages) that
exceed the surge voltage may lead to irreparable damage.
Capacitance
The actual capacitance of a capacitor can deviate from the rated capacitance by as much as the
full magnitude of the tolerance at delivery. The capacitance varies with the temperature (at
+125
°C +12% up to +20%) and decreases with increasing frequency.
Tantalum chip capacitors
B45196P, B45198P
Performance, High Reliability 150
°C
Page 13 of 15
Please read Important notes and
Cautions and warnings at the end of this document.
相關PDF資料 |
PDF描述 |
|---|---|
| B4BBEAFREQ1 | QUARTZ CRYSTAL RESONATOR, 12 MHz - 19.999 MHz |
| B4AEBAFREQ2 | QUARTZ CRYSTAL RESONATOR, 20 MHz - 25.999 MHz |
| B4ABBCFREQ1 | QUARTZ CRYSTAL RESONATOR, 12 MHz - 19.999 MHz |
| B4ABACFREQ2 | QUARTZ CRYSTAL RESONATOR, 20 MHz - 25.999 MHz |
| B4BAAAFREQ1 | QUARTZ CRYSTAL RESONATOR, 12 MHz - 19.999 MHz |
相關代理商/技術參數 |
參數描述 |
|---|---|
| B45198P2157K109 | 制造商:KEMET 制造商全稱:Kemet Corporation 功能描述:Tantalum Chip Capacitors |
| B45198P2157K206 | 制造商:KEMET 制造商全稱:Kemet Corporation 功能描述:Tantalum Chip Capacitors |
| B45198P2157K209 | 制造商:KEMET 制造商全稱:Kemet Corporation 功能描述:Tantalum Chip Capacitors |
| B45198P2157K306 | 制造商:KEMET 制造商全稱:Kemet Corporation 功能描述:Tantalum Chip Capacitors |
| B45198P2157K309 | 制造商:KEMET 制造商全稱:Kemet Corporation 功能描述:Tantalum Chip Capacitors |
發布緊急采購，3分鐘左右您將得到回復。