- 您現在的位置：買賣IC網 > PDF目錄210106 > AZ4707F SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, PANEL MOUNT PDF資料下載
參數資料
| 型號： | AZ4707F |
| 元件分類： | 開關 |
| 英文描述： | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, PANEL MOUNT |
| 封裝： | CADMIUM FREE |
| 文件頁數： | 18/21頁 |
| 文件大小： | 709K |
| 代理商： | AZ4707F |
42
MOUNTING METHOD
1. L socket type
1) After loosening the L socket fastening
screws, grasp the terminal cover and pull
it away from the switch body.
2) Remove the fastening screw from the
terminal block. (Remove with the 3 termi-
nal receptacle.)
3) Loosen the hexagonal nut and
remove the rubber bushing and washer
from the inside.
4) Select cord from applicable wire table.
5) Decide which direction the cord outlet
is to face and strip the sheath according-
ly. (See page 43.)
6) After passing the applicable cord
through the hexagonal nut, bushing, and
washer in that order, pass the cord
through the terminal case.
7) After stripping the cord sheath, insert
the corresponding wires into the grooves
of the terminal body up to the wire stop,
then crimp the terminal receptacle over
the wires with a pair of pliers.
8) After the terminals have been properly
crimped in the terminal body, insert the
body into the terminal case. (When
inserting the body, be careful not to block
the hole for the fastening screw with the
wires.)
9) Temporarily screw in the fastening
screw through the terminal body, then
insert the washer and rubber bushing
into the cord opening of L socket.
Tighten it with a wrench or pliers.
10) Apply the rubber packing over the
terminals, then insert the L socket into
the switch body.
11) Tighten the fastening screw into the
switch body.
2. Socket with cord (including socket
with lamp)
1) Apply the rubber packing over the ter-
minals, then insert the socket with cord
into the switch body.
2) Screw the socket fastening screw into
the switch body and tighten it.
Mounting
The QL micro limit switch is manufac-
tured with a very small variation in the
distance between the datum plane and
the operating point. When the operating
point has been accurately established
and the mounting position clearly deter-
mined, two M4 bolts should be used
securely fastening the switch.
Pull away from the body.
Turn counterclockwise.
Terminal receptacle
Terminal body connection diagram
Turn counterclockwise.
Clockwise direction
Operating position
M4 fastening bolts
Mounting
Mounting plate
datum plane
(O.P.)
Lead wire stop
Terminal body
Terminal receptacle
Lead wire
QL (AZ4)
相關PDF資料 |
PDF描述 |
|---|---|
| AZ51059 | SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.8A, 125VDC, PANEL MOUNT |
| AZ5107669 | SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 6A, 24VDC, PANEL MOUNT |
| AZ5127F | SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.8A, 125VDC, PANEL MOUNT |
| AV62251264 | SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.1A, 30VDC, 2.1mm, PANEL MOUNT |
| AV6242643 | SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.1A, 30VDC, 3.8mm, PANEL MOUNT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AZ47089 | 功能描述:SWITCH SNAP ACTION SPDT 5A 125V 制造商:panasonic industrial automation sales 系列:AZ4 包裝:散裝 零件狀態:有效 電路:SPDT 開關功能:開-瞬時 額定電流:5A（AC/DC） 額定電壓 - AC:125V 額定電壓 - DC:30V 致動器類型:側旋，可調滾軸 安裝類型:底座安裝 端子類型:電纜引線 侵入防護:IP64 - 防塵，耐水 特性:- 操作力，扭矩:205 ~ 450gf 釋放力:11 ~ 25gf 預行程:15° 差動行程:3° 超行程:- 工作位置:- 機械壽命:10，000，000 次循環 電氣壽命:300，000 次循環 工作溫度:-20°C ~ 60°C 標準包裝:1 |
| AZ470K | 功能描述:陶瓷復合電阻器 5.5watt 47ohm 10% High Energy Non-Ind. RoHS:否 制造商:KOA Speer 電阻:1 kOhms 容差:10 % 功率額定值:1 W 電壓額定值:500 V 系列:PCF 溫度系數:- 1200 PPM / K 端接類型:Axial 尺寸:5.5 mm Dia. x 16.5 mm L 工作溫度范圍:- 40 C to + 200 C 封裝:Reel |
| AZ470KE | 功能描述:陶瓷復合電阻器 5.5watt 47ohm 10% High Energy Non-Ind. RoHS:否 制造商:KOA Speer 電阻:1 kOhms 容差:10 % 功率額定值:1 W 電壓額定值:500 V 系列:PCF 溫度系數:- 1200 PPM / K 端接類型:Axial 尺寸:5.5 mm Dia. x 16.5 mm L 工作溫度范圍:- 40 C to + 200 C 封裝:Reel |
| AZ471K | 功能描述:陶瓷復合電阻器 5.5watt 470ohm 10% High Energy Non-Ind. RoHS:否 制造商:KOA Speer 電阻:1 kOhms 容差:10 % 功率額定值:1 W 電壓額定值:500 V 系列:PCF 溫度系數:- 1200 PPM / K 端接類型:Axial 尺寸:5.5 mm Dia. x 16.5 mm L 工作溫度范圍:- 40 C to + 200 C 封裝:Reel |
| AZ471KE | 功能描述:陶瓷復合電阻器 5.5watt 470ohm 10% High Energy Non-Ind. RoHS:否 制造商:KOA Speer 電阻:1 kOhms 容差:10 % 功率額定值:1 W 電壓額定值:500 V 系列:PCF 溫度系數:- 1200 PPM / K 端接類型:Axial 尺寸:5.5 mm Dia. x 16.5 mm L 工作溫度范圍:- 40 C to + 200 C 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。