參數資料
型號: AZ3512
元件分類: 開關
英文描述: SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 4A, 30VDC, 9mm, PANEL MOUNT
封裝: ROHS COMPLIANT
文件頁數: 17/20頁
文件大?。?/td> 603K
代理商: AZ3512
17
SL (AZ3)
CAUTIONS
1. Ambient conditions
1) The use of these switches under the
following conditions should be avoided.
If the following conditions should become
necessary, we recommend consulting us
first.
Use where there will be direct con tact
with organic solvents, strong acids or
alkalis, or direct exposure to their vapors.
Use where inflammable or corrosive
gases exist.
Because these switches are not of
water resistant or immersion-proof con-
struction, their use in water or oil should
be avoided. Also, locations where water
or oil can normally impringe upon the
switch or where there is an excessive
accumulation of dust should be avoided.
2) To improve reliability during actual
use, it is recommended that the opera-
tion be checked under installation condi-
tions.
3) If OT is too big, the life of limit switch
will be shortened switching friction. Use it
with enough margin of OT. 70% of OT
standard value will be good for use.
4) Do not use the switch in a silicon
atmosphere. Case should be taken
where organic silicon rubber, adhesive,
sealing material, oil, grease or lead wire
generates silicon.
5) Avoid use in excessively dusty envi-
ronments where actuator operation
would be hindered.
6) When used outdoors (in places where
there is exposure to direct sunlight or
rain such as in multistory car parks) or in
environments where ozone is generated,
the influence of these environments may
cause deterioration of the rubber materi-
al. Please consult us if you intend to use
a switch in environments such as these.
2. Mounting and wiring
1) Although SL limit switches have large
over-travel (O.T.), excessive O.T. will
occur wear and change in its characteris-
tics. Specifically, where there is a need
for long life, it is recommended that the
proper O.T. as given below should be
used. Specifically, where there is a need
for long life, it is recommended that the
proper O.T. as given below should be
used.
Within 1 to 3mm .039 to .118inch
2) When the operating object is in the
free condition, force should not be
applied directly to the actuator.
3) Use their own accessories when
mounting and wiring SL limit switches so
as to maintain their own characteristics.
When the SL rubber cover type is used,
there should absolutely be no tension
applied to the cord. If there is the fear
that tension may be applied, the L socket
or socket with cord attached should be
used. The maximum permissible tension
with the above socket use is
98N{10kgF}.
4) The tightening torque when installing
this limit switch should be 1.18 to 1.47
Nm (12 to 15 kgcm).
相關PDF資料
PDF描述
AZ510216F SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 6A, 24VDC, 7.3mm, PANEL MOUNT
AZ4707F SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 5A, 30VDC, PANEL MOUNT
AZ51059 SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.8A, 125VDC, PANEL MOUNT
AZ5107669 SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 6A, 24VDC, PANEL MOUNT
AZ5127F SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.8A, 125VDC, PANEL MOUNT
相關代理商/技術參數
參數描述
AZ35129 功能描述:SWITCH SNAP ACTION SPDT 4A 125V 制造商:panasonic industrial automation sales 系列:AZ3 包裝:散裝 零件狀態:過期 電路:SPDT 開關功能:開-瞬時 額定電流:4A(AC/DC) 額定電壓 - AC:125V 額定電壓 - DC:30V 致動器類型:按片,直形 安裝類型:底座安裝 端子類型:焊接,快速連接 - 0.110"(2.8mm) 侵入防護:IP60 - 防塵 特性:端子蓋 操作力,扭矩:120gf 釋放力:25gf 預行程:0.120"(3.0mm) 差動行程:0.060"(1.5mm) 超行程:0.235"(6.0mm) 工作位置:0.657"(16.7mm) 機械壽命:10,000,000 次循環 電氣壽命:100,000 次循環 工作溫度:-20°C ~ 60°C 標準包裝:1
AZ35139 制造商:Panasonic Industrial Devices 功能描述:SL Roller Lever Rubber Cover Type Limit Switch
AZ35229 制造商:Panasonic Electric Works 功能描述:
AZ35239 制造商:Panasonic Electric Works 功能描述:
AZ35249 功能描述:SWITCH SNAP ACTION SPDT 4A 125V 制造商:panasonic industrial automation sales 系列:AZ3 包裝:散裝 零件狀態:過期 電路:SPDT 開關功能:開-瞬時 額定電流:4A(AC/DC) 額定電壓 - AC:125V 額定電壓 - DC:30V 致動器類型:按片,滾軸 安裝類型:底座安裝 端子類型:焊接,快速連接 - 0.110"(2.8mm) 侵入防護:IP60 - 防塵 特性:端子蓋 操作力,扭矩:200gf 釋放力:50gf 預行程:0.120"(3.0mm) 差動行程:0.060"(1.5mm) 超行程:0.235"(6.0mm) 工作位置:1.594"(40.5mm) 機械壽命:10,000,000 次循環 電氣壽命:100,000 次循環 工作溫度:-20°C ~ 60°C 標準包裝:1