- 您現在的位置：買賣IC網 > PDF目錄298849 > AXW65002A 50 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, PRESS FIT, SOCKET PDF資料下載
參數資料
| 型號： | AXW65002A |
| 元件分類： | 電信和以太網連接器 |
| 英文描述： | 50 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, PRESS FIT, SOCKET |
| 文件頁數： | 7/9頁 |
| 文件大小： | 509K |
| 代理商： | AXW65002A |
AXW
160
mm General tolerance: ±0.3
4) Contacts (5 in line)
26
16.7
5.08
×4=20.32
Position of the breaking contacts
5.08
2.54
Note) On the contacts there are
stamps “22” for AWG #22
and #24 types, and “26” for
AWG #26 and #28 types.
NOTES
1. Use wires and contact types that
match.
The contact’s clamp is tamped with 22 or
26.
Use AWG#22 or #24 wire with the type
22 contact and AWG #26 or #28 wire with
the type 26 contact.
An incorrect combination will cause faulty
connections.
2. Use wires having a correct outer
insulation diameter.
The use of a wire with an outer insulation
diameter larger than the allowable value
or a wire with a hard material for the
insulation will cause faulty connections.
Furthermore, the use of a wire with an
outer insulation diameter less than the
allowable value will cause a drop in the
clamp strength. Use wires with a suitable
outer diameter and insulation material.
Suitable wire diameters are shown in the
table below.
Suitable wire diameters
* AWG#22 and #24 use different contacts from
AWG#26 and #28. Refer to the part number chart for
the part number.
3. Inserted wire length during wire
pressure welding
Insert the wire to a proper length and
perform the pressure welding.
If the inserted length is too short, the wire
will be pressure welded only at one
location.
If the inserted length is too long, the wire
will end up on the lance portion and a
proper pressure welding will not be
obtained.
4. Cut the end of the wire so that it is
straight and at. Be sure no uneven
strands remain.
5. When pressure welding a wire, fully
insert it to the proper position. Be sure
to squeeze the lever unit it reaches the
end position of the stroke.
6. After connecting the wire, check
that the wire clamp rmly clamps the
wire.
7. The contact holder should be
replaced as needed.
Size
Insulation
outer
diameter
Remark
AWG#22 1.5 dia. to
1.1 dia.
AWG #22 is Stranded
wire of 12 stands/0.18
AWG#24
Stranded wire
AWG#26 1.3 dia. to
1.1 dia.
Stranded wire
AWG#28
AXW.fm 160 y[W QOOR”NPQQQ“ú@—j“ú@PQPO
相關PDF資料 |
PDF描述 |
|---|---|
| AXW65003A | 50 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, PRESS FIT, SOCKET |
| AXW66001A | 60 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, PRESS FIT, SOCKET |
| AXW66002A | 60 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, PRESS FIT, SOCKET |
| AXW66003A | 60 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, PRESS FIT, SOCKET |
| AXW66401A | 64 CONTACT(S), FEMALE, TELECOM AND DATACOM CONNECTOR, PRESS FIT, SOCKET |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AXW65003A | 功能描述:WIRE PRESS SOCKET COVER 50POS RA 制造商:panasonic electric works 系列:AXW 零件狀態:過期 配件類型:帽蓋（蓋） 針腳數:50 配套使用產品/相關產品:AXW 系列插座 特性:直角 標準包裝:1 |
| AXW66001A | 功能描述:WIRE PRESS SOCKET SEMI-COVER 60P 制造商:panasonic electric works 系列:AXW 零件狀態:過期 配件類型:帽蓋（蓋） 針腳數:60 配套使用產品/相關產品:AXW 系列插座 特性:- 標準包裝:1 |
| AXW66002A | 功能描述:WIRE PRESS SOCKET COVER 60POS 制造商:panasonic electric works 系列:AXW 零件狀態:過期 配件類型:帽蓋（蓋） 針腳數:60 配套使用產品/相關產品:AXW 系列插座 特性:- 標準包裝:1 |
| AXW66003A | 功能描述:WIRE PRESS SOCKET COVER 60POS RA 制造商:panasonic electric works 系列:AXW 零件狀態:過期 配件類型:帽蓋（蓋） 針腳數:60 配套使用產品/相關產品:AXW 系列插座 特性:直角 標準包裝:1 |
| AXW66401A | 功能描述:WIRE PRESS SOCKET SEMI-COVER 64P 制造商:panasonic electric works 系列:AXW 零件狀態:過期 配件類型:帽蓋（蓋） 針腳數:64 配套使用產品/相關產品:AXW 系列插座 特性:- 標準包裝:1 |
發布緊急采購，3分鐘左右您將得到回復。