參數資料
型號: AX88796L
廠商: Electronic Theatre Controls, Inc.
英文描述: 3-in-1 Local Bus Fast Ethernet Controller
中文描述: 3合1本地總線快速以太網控制器
文件頁數: 49/71頁
文件大小: 931K
代理商: AX88796L
ASIX ELECTRONICS CORPORATION
49
AX88796 L 3-in-1 Local Bus Fast Ethernet Controller
5.2.16 MR30 –Device-Specific Register 3 (10Mbps Control) Bit Descriptions
FIELD
TYPE
30.15 (Test10TX)
R/W
When high and 10Base-T is powered up, a continuous 10 MHz signal
(1111) will be transmitted. This is only meant for testing. Default 0.
30.14 (RxPLLEn)
R/W
When high, all 10Base-T logic will be powered up when the link is up.
Otherwise, portions of the logic will be powered down when no data is being
received to conserve power. Default is 0.
30.13 (JAB_DIS)
R/W
Jabber Disable.
When this bit is 1, disables the jabber function of the
10Base-T receive. Default is 0.
30.12:7 (UNUSED)
R/W
Unused.
Read as 0.
30.6 (LITF_ENH)
R/W
Enhanced Link Integrity Test Function.
When high, function is enabled.
This is ORed with the LITF_ENH input. Default is 0.
30.5 (HBT_EN)
R/W
Heartbeat Enable.
When this bit is a 1, the heartbeat function will be
enabled. Valid in 10Mbits/s mode only.
30.4 (ELL_EN)
R/W
Extended Line Length Enable.
When this bit is a 1, the receive squelch
levels are reduced from a nominal 435 mV to 350 mV, allowing reception of
signals with a lower amplitude. Valid in 10Mbits/s mode only.
30.3 (APF_EN)
R/W
Autopolarity Function Disable.
When this bit is a 0 and the PHY is in 10
Mbits/s mode, the autopolarity function will determine if the TP link is
wired with a polarity reversal.
If there is a polarity reversal, the PHY will assert the APS bit (register 28, bit
6) and correct the polarity reversal. If this bit is a 1 and the device is in 10
Mbits/s mode, the reversal will not be corrected.
30.2 (RESERVED)
R/W
Reserved
.
30.1 (SERIAL _SEL)
R/W
Serial Select.
When this bit is set to a 1, 10Mbits/s serial mode will be
selected. When the PHY is in 100Mbits/s mode, this bit will be ignored.
30.0 (ENA_NO_LP)
R/W
No Link Pulse Mode.
Setting this bit to a 1 will allow 10Mbits/s operation
with link pulses disabled. If the PHY is configured for 100Mbits/s operation,
setting this bit will not affect operation.
DESCRIPTION
相關PDF資料
PDF描述
AY3-8910 PROGRAMMABLE SOUND GENERATOR
AY-3-8910 PROGRAMMABLE SOUND GENERATOR
AY-3-8912 PROGRAMMABLE SOUND GENERATOR
AY-3-8913 PROGRAMMABLE SOUND GENERATOR
AY38910 PROGRAMMABLE SOUND GENERATOR
相關代理商/技術參數
參數描述
AX88796LF 制造商:ASIX 功能描述:10/100 MAC
AX88850 制造商:ASIX 制造商全稱:ASIX 功能描述:100BASE-TX/FX Repeater Controller
AX88851 制造商:ASIX 制造商全稱:ASIX 功能描述:100BASE-TX/FX Repeater Controller
AX88852 制造商:ASIX 制造商全稱:ASIX 功能描述:100BASE-TX/FX Repeater Controller
AX88853 制造商:ASIX 制造商全稱:ASIX 功能描述:100BASE-TX/FX Repeater Controller