參數資料
型號： AV38343
元件分類： 開關
英文描述： SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 3A, 30VDC, 5.1mm, PANEL MOUNT
封裝： ROHS COMPLIANT
文件頁數： 5/13頁
文件大?。?/td> 273K
代理商： AV38343
AV3,AVM3/AVT3,AVL3
NOTES
2-(3) .110 Quick-connect terminal
5.5
7.1
11.0
16.1
8.8
NO
NC
C
±0.1
±0.15
0.6 max.
2.4
9.5
7.6
6.4
2.8
0.5
4.0
8.4
(P.T.)
6.7
7.7
3.3
-0.05
+0.1
2.4
2.5
±0.3
±0.1
(O.P.)
±0.3
±0.2
±0.1
2.4
dia.
+0.1
-0.05
1.2
dia.
±0.05
19.8
±0.3
As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal.
mm General tolerance:
±0.25
1.Regarding fastening of switch body
In fastening the switch body, use at
lister head M2.3 screws, with tightening
torque of not more than 0.29Nm.To
prevent loosening of the screws, it is
recommended that spring washers be
used with the screws and adhesive be
applied to lock the screws.
After mounting the switch and making
wiring connections, the insulation
distance between ground and each
terminal should be conrmed as
sufcient.
The positioning of the switch should be
such that the pushbutton or actuator for
the switch should not directly apply force
to the operating section in the free
condition.For a pushbutton, the force
from the pushbutton should be applied in
a perpendicular direction.
In setting the movement after operation,
the over-travel should be set not less
than 70% as a standard.Setting the
movement at less than 70% of O.T.may
cause troubles such as mis-contact and
welding due to small contact force of the
switch.
2.Soldering operation
For manual soldering: 60W soldering
iron, soldering completed within 3
seconds; do not apply force to the
terminals.
For automatic soldering tank: 250
°C
immersion, completed within 6 seconds,
350
°C immersion, completed within 3
seconds.
Terminal portions must not be moved in
min.1 minute after soldering.Also no
tensile strength of lead wires should be
applied to terminals.
3.Regarding connector connections
(.110 quick connect terminals)
For making connections, a dedicated
receptacle for .110 quick connect
terminals should be used, and the
terminals should be inserted parallel to
the receptacle.Consideration should be
given to mounting so that no tensile load
is applied to the lead wires.
4.In making the switch selection
Consideration should be given to provide
for no interference up to +20% variation
of the standard characteristics values.
5.Environment
Locations where corrosive gases having
a bad inuence on contacts are present,
and locations where there is an
excessive amount of siliceous or other
abrasive dust should be avoided.
6.Cautions regarding use
This subminiature switch has been
designed as a dedicated switch for AC
use, but it can be used for low capacity
DC circuits.
Please select gold-clad contact types
when loads are in the low-level area of
1mA up to 100mA and 5V up to 30V.
For switching of inductive loads (relays,
solenoids, buzzers, etc.), in order to
prevent damage to contacts due to the
occurrence of arcing, an arc absorbing
circuit should be applied
7.Quality check under Actual Loading
Condition
To assure reliability, check the switch
under actual loading conditions.Avoid any
situation that may adversely affect
switching performance.
8.When using lever type switch, care
should be taken not to apply undue
force on the body from the opposite
side or side ways to its operating
direction.
N.C.
side
N.O.
side
Contact
force
Stroke
0
O.T. max.
Usable
area
P.T.
O.T. spedified
value
70% of O.T.
specified value
Ag
Au (-61)
Triple layer contact type
3 A
100 mA
1 mA
0
DC
AC
(Reference only)
5
15
30V
30
250V
All Rights Reserved COPYRIGHT Matsushita Electric Works, Ltd.
相關PDF資料
PDF描述
AV09C7L3D9003A0K PUSHBUTTON SWITCH, SPST, MOMENTARY-TACTILE, 0.05A, 24VDC, PANEL MOUNT-THREADED
AV190003C20200 PUSHBUTTON SWITCH, SPST, MOMENTARY-TACTILE, 2A, 48VDC, PANEL MOUNT-THREADED
AVM30003C942N PUSHBUTTON SWITCH, SPST, MOMENTARY, 2A, 48VDC, PANEL MOUNT-THREADED
AV3224613 SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.1A, 30VDC, 4mm, PANEL MOUNT
AV3400613 SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.1A, 30VDC, 1mm, THROUGH HOLE-STRAIGHT
相關代理商/技術參數
參數描述
AV3834613 制造商:Panasonic Electric Works 功能描述:Switch,long hinge lever,0.25N,QC tm,
AV3834619 功能描述:基本/快動開關 SWITCH FS HINGE LVR GOLD .110"QC RoHS:否 制造商:Omron Electronics 觸點形式:SPDT 執行器:Lever 電流額定值:5 A 電壓額定值 AC:250 V 電壓額定值 DC:30 V 功率額定值: 工作力:120 g IP 等級:IP 67 NEMA 額定值: 端接類型:Wire 安裝:Panel
AV38349 功能描述:基本/快動開關 SWITCH FS HINGE LVR SILVER .110"QC RoHS:否 制造商:Omron Electronics 觸點形式:SPDT 執行器:Lever 電流額定值:5 A 電壓額定值 AC:250 V 電壓額定值 DC:30 V 功率額定值: 工作力:120 g IP 等級:IP 67 NEMA 額定值: 端接類型:Wire 安裝:Panel
AV38423 功能描述:SWITCH SNAP ACTION SPDT 3A 125V 制造商:panasonic electric works 系列:AV3 包裝:散裝 零件狀態:有效 電路:SPDT 開關功能:開-瞬時 額定電流:3A（AC/DC） 額定電壓 - AC:125V 額定電壓 - DC:30V 致動器類型:按片，仿真滾軸 安裝類型:底座安裝 端子類型:快速連接 - 0.110"（2.8mm） 侵入防護:- 特性:- 操作力，扭矩:16gf 釋放力:1.5gf 預行程:0.110"（2.8mm） 差動行程:0.032"（0.81mm） 超行程:0.047"（1.2mm） 工作位置:0.460"（11.7mm） 機械壽命:500，000 次循環 電氣壽命:50，000 次循環 工作溫度:-25°C ~ 85°C 標準包裝:100
AV3842619 功能描述:基本/快動開關 SWITCH FS ROLLER LVR GOLD .110"QC RoHS:否 制造商:Omron Electronics 觸點形式:SPDT 執行器:Lever 電流額定值:5 A 電壓額定值 AC:250 V 電壓額定值 DC:30 V 功率額定值: 工作力:120 g IP 等級:IP 67 NEMA 額定值: 端接類型:Wire 安裝:Panel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*