參數資料
型號： AT89C5115-TISIM
廠商： ATMEL CORP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PDSO28
封裝： GREEN, SOIC-28
文件頁數： 38/109頁
文件大?。?/td> 10824K
代理商： AT89C5115-TISIM
282
7593L–AVR–09/12
AT90USB64/128
4 - NAKOUTI - NAK OUT Received Interrupt flag
Set by hardware when a NAK handshake has been sent in response of a OUT/PING request
from the host. This triggers an USB interrupt if NAKOUTE is sent.
Shall be cleared by software. Setting by software has no effect.
3 - RXSTPI - Received SETUP Interrupt flag
Set by hardware to signal that the current bank contains a new valid SETUP packet. An inter-
rupt (EPINTx) is triggered (if enabled).
Shall be cleared by software to handshake the interrupt. Setting by software has no effect.
This bit is inactive (cleared) if the endpoint is an IN endpoint.
2 - RXOUTI / KILLBK - Received OUT Data Interrupt flag
Set by hardware to signal that the current bank contains a new packet. An interrupt (EPINTx) is
triggered (if enabled).
Shall be cleared by software to handshake the interrupt. Setting by software has no effect.
Kill Bank IN bit
Set this bit to kill the last written bank.
Cleared by hardware when the bank is killed. Clearing by software has no effect.
See page 271 for more details on the Abort.
1 - STALLEDI - STALLEDI Interrupt flag
Set by hardware to signal that a STALL handshake has been sent, or that a CRC error has been
detected in a OUT isochronous endpoint.
Shall be cleared by software. Setting by software has no effect.
0 - TXINI - Transmitter Ready Interrupt flag
Set by hardware to signal that the current bank is free and can be filled. An interrupt (EPINTx) is
triggered (if enabled).
Shall be cleared by software to handshake the interrupt. Setting by software has no effect.
This bit is inactive (cleared) if the endpoint is an OUT endpoint.
7 - FLERRE - Flow Error Interrupt Enable flag
Set to enable an endpoint interrupt (EPINTx) when OVERFI or UNDERFI are sent.
Clear to disable an endpoint interrupt (EPINTx) when OVERFI or UNDERFI are sent.
6 - NAKINE - NAK IN Interrupt Enable bit
Set to enable an endpoint interrupt (EPINTx) when NAKINI is set.
Clear to disable an endpoint interrupt (EPINTx) when NAKINI is set.
Bit
7
6
5
4
3
210
FLERRE
NAKINE
-
NAKOUTE
RXSTPE
RXOUTE
STALLEDE
TXINE
UEIENX
Read/write
R/W
R
R/W
Initial value
0
相關PDF資料
PDF描述
AT90CAN128-15MT 8-BIT, FLASH, 16 MHz, RISC MICROCONTROLLER, QCC64
ABM8-FREQ-18-R050-D-7-H-T QUARTZ CRYSTAL RESONATOR, 30 MHz - 60 MHz
ABM3B-FREQ-18-R050 QUARTZ CRYSTAL RESONATOR, 16 MHz - 60 MHz
ABM3B-FREQ-18-R070-1-X QUARTZ CRYSTAL RESONATOR, 12 MHz - 15.999 MHz
ABM3B-FREQ-18-R070-1-Z QUARTZ CRYSTAL RESONATOR, 12 MHz - 15.999 MHz
相關代理商/技術參數
參數描述
AT89C5115-TISUM 功能描述:8位微控制器 -MCU 16K Flash ADC RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
AT89C51-16AA 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:8-Bit Microcontroller with 4K Bytes Flash
AT89C51-16AC 功能描述:8位微控制器 -MCU Microcontroller RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
AT89C51-16AI 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:8-Bit Microcontroller with 4K Bytes Flash
AT89C51-16JA 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:8-Bit Microcontroller with 4K Bytes Flash
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*