- 您現在的位置：買賣IC網 > PDF目錄381407 > AT24C01A-10TU-2.7 (ATMEL CORP) 2-Wire Serial EEPROM PDF資料下載
參數資料
| 型號： | AT24C01A-10TU-2.7 |
| 廠商： | ATMEL CORP |
| 元件分類： | DRAM |
| 英文描述： | 2-Wire Serial EEPROM |
| 中文描述： | 128 X 8 I2C/2-WIRE SERIAL EEPROM, PDSO8 |
| 封裝： | 4.40 MM, GREEN, PLASTIC, MO-153AA, TSSOP-8 |
| 文件頁數： | 6/24頁 |
| 文件大小： | 445K |
| 代理商： | AT24C01A-10TU-2.7 |
6
AT24C01A/02/04/08A/16A
0180V–SEEPR–8/05
Device Operation
CLOCK and DATA TRANSITIONS:
The SDA pin is normally pulled high with an exter-
nal device. Data on the SDA pin may change only during SCL low time periods (see
Figure 4 on page 7). Data changes during SCL high periods will indicate a start or stop
condition as defined below.
START CONDITION:
A high-to-low transition of SDA with SCL high is a start condition
which must precede any other command (see Figure 5 on page 8).
STOP CONDITION:
A low-to-high transition of SDA with SCL high is a stop condition.
After a read sequence, the stop command will place the EEPROM in a standby power
mode (see Figure 5 on page 8).
ACKNOWLEDGE:
All addresses and data words are serially transmitted to and from the
EEPROM in 8-bit words. The EEPROM sends a zero to acknowledge that it has
received each word. This happens during the ninth clock cycle.
STANDBY MODE:
The AT24C01A/02/04/08A/16A features a low-power standby mode
which is enabled: (a) upon power-up and (b) after the receipt of the STOP bit and the
completion of any internal operations.
MEMORY RESET:
After an interruption in protocol, power loss or system reset, any 2-
wire part can be reset by following these steps:
1.
Clock up to 9 cycles.
2.
Look for SDA high in each cycle while SCL is high.
3.
Create a start condition.
相關PDF資料 |
PDF描述 |
|---|---|
| AT24C08 | 2-Wire Serial EEPROM |
| AT24C08-10PC | 2-Wire Serial EEPROM |
| AT24C08-10PC-1.8 | 2-Wire Serial EEPROM |
| AT24C08-10PC-2.5 | 2-Wire Serial EEPROM |
| AT24C08-10PC-2.7 | 2-Wire Serial EEPROM |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AT24C01ASC | 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Two-wire Serial EEPROM Smart Card Modules |
| AT24C01ASC-09AT | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:I2C Serial EEPROM |
| AT24C01ASC-09AT-2.7 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:I2C Serial EEPROM |
| AT24C01ASC-09BT | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:I2C Serial EEPROM |
| AT24C01ASC-09BT-2.7 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:I2C Serial EEPROM |
發布緊急采購，3分鐘左右您將得到回復。