- 您現在的位置：買賣IC網 > Datasheet目錄60 > AS5115-HSST-500 (ams)IC ENCODER ROTARY 16-SSOP Datasheet資料下載
參數資料
| 型號： | AS5115-HSST-500 |
| 廠商： | ams |
| 文件頁數： | 14/21頁 |
| 文件大?。?/td> | 1429K |
| 描述： | IC ENCODER ROTARY 16-SSOP |
| 應用說明： | AS5000 Series Magnet Selection Guide AS5000 Series Magnets for Extended Vertical Range |
| 標準包裝： | 1 |
| 傳感范圍： | 32mT 跳閘，160mT 釋放 |
| 類型： | 線性，旋轉式 - 可編程 |
| 電源電壓： | 4.5 V ~ 5.5 V |
| 電流 - 電源： | 28mA |
| 電流 - 輸出（最大）： | 1mA |
| 輸出類型： | 模擬，數字 |
| 特點： | 高精度 |
| 工作溫度： | -40°C ~ 150°C |
| 封裝/外殼： | 16-SSOP（0.209"，5.30mm 寬） |
| 供應商設備封裝： | 16-SSOP |
| 包裝： | 標準包裝 |
| 其它名稱： | AS5115-HSST-500DKR |
www.austriamicrosystems.com/AS5115
Revision 1.11
13 - 20
AS5115
Datasheet - Detailed Description
7.9 OTP Programming and Verification
Figure 9. OTP Programming Connection
Note: The maximum capacitive load at PROG in normal operation should be less than 20pF. However, during programming the capacitors
C1+C2 are needed to buffer the programming voltage during current spikes, but they must be removed for normal operation. To
overcome this contradiction, the recommendation is to add a diode (4148 or similar) between PROG and VDD as shown in Figure 9
(special case setup), if the capacitors can not be removed at final assembly.
Due to D1, the capacitors C1+C2 are loaded with VDD - 0.7V at startup, hence not influencing the readout of the internal OTP registers.
During programming the OTP, the diode ensures that no current is flowing from PROG (8V - 8.5V) to VDD (5V).
In the standard case (see Figure 9), the verification of a correct OTP readout can be done by analog readback of the OTP register.
As long as the PROG pin is accessible it is recommended to use standard setup. In case the PROG pin is not accessible at final
assembly, the special setup is recommended.
VDD
VSS
Micro
Controller
AS5130
100n
VSS
+5V
VDD
CS
VDD
DCLK
DIO
PROG
VSS
+
10礔 100n
8.0 - 8.5V
I/O
Output
Output
VDD
V
SUPPLY
PROG
GND
C1
C2
100nF
10礔
V
zapp
V
prog
PROM Cell
maximum
parasitic cable
inductance
L<50nH
Standard Case
VDD
V
SUPPLY
PROG
GND
C1
C2
100nF
10礔
V
prog
PROM Cell
L<50nH
Special Case
Remove for normal operation
相關PDF資料 |
PDF描述 |
|---|---|
| AS5130-ASST-500 | IC ENCODER ROTORY 8-BIT 16-SSOP |
| AS5132-HSST-500 | IC ENCODER ROTARY 20-SSOP |
| AS5134-ZSST-500 | IC ENCODER RPTARY 20-SSOP |
| AS5140H-ASST | IC ENCODER ROTARY 10BIT 16-SSOP |
| AS5145B-HSST-500 | IC ENCODER ROTARY MAGN 16-SSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AS5115-SS_EK_AB | 功能描述:AS5115 - Magnetic, Rotary Position Sensor Evaluation Board 制造商:ams 系列:- 零件狀態:有效 傳感器類型:磁性，旋轉位置 感應范圍:360° 接口:模擬和數字 靈敏度:- 電壓 - 電源:4.5 V ~ 5.5 V 嵌入式:- 所含物品:板 使用的 IC/零件:AS5115 標準包裝:1 |
| AS5115-SS_EK_DB | 功能描述:AS5115 - Magnetic, Rotary Position Sensor Evaluation Board 制造商:ams 系列:- 零件狀態:有效 傳感器類型:磁性，旋轉位置 感應范圍:360° 接口:模擬和數字 靈敏度:- 電壓 - 電源:5V USB 或 9V 嵌入式:是 所含物品:板 使用的 IC/零件:AS5115 標準包裝:1 |
| AS5115-SS_EK_PB | 功能描述:AS5115 - ZIF Socket 制造商:ams 系列:- 零件狀態:有效 模塊/板類型:ZIF 插口 配套使用產品/相關產品:AS5115 標準包裝:1 |
| AS5117-02 | 制造商:MISCELLANEOUS 功能描述: |
| AS51180FLF | 制造商:TT Electronics / IRC 功能描述:AS51180FLF |
發布緊急采購，3分鐘左右您將得到回復。