
AS1716
Capacitive Sensor Interface
Revision 1.021 - 12
Datasheet
1 General Description
AS1716 is an analog front end specifically designed for unbiased
Capacitive Sensors, as for instance Knock Sensors in Automotive, to
be interfaced with Analog Digital Converters with Sample and Hold
input stages.
The device provides differential inputs, a 1st order low pass filter to
cutoff the high frequency noise components, differential to single
ended conversion, programmable gain stage and a 2 pole low pass
Multiple Feedback Filter.
The Knock Sensor is a Piezo Electric device that generates a voltage
if it is stressed. It senses knock and transmts information to the elec-
tronic engine management control unit. This influences process con-
trol in the engine, for example timng and fuel injection until knock is
elimnated.
The capacitive sensor is biased via resistors to a voltage level of
V
DDA
/2.
Figure 1. AS1716 - Block Diagram
2 Key Features
Differential input stage with wide input range
Resistive sensor biasing (V
DDA
/2)
Programmable Gain (x0.5, x1, x2, x4)
Internal 2
nd
order low pass Multiple Feedback Filter with a mn.
cut off frequency of 16kHz
Single supply operation: 4.5V to 5.5V
Operating Temperature range: -40°C to +125°C
High CMRR: 55dB (mn)
EMC characterized by IEC 61967-4
(1
Ω
/ 150
Ω
Method)
EMC characterized by IEC 62132-4
(Direct Power Injection)
Automotive qualified to AECQ100 for IC and PPAP level 3
8-pin SOIC Package
3 Applications
Analog front end for Capacitive Sensors to Analog to Digital Convert-
ers and DSP.
+
-
-
+
-
+
VDDA
VDDA/2
Multiple Feedback LP Filter
fc ~23kHz typ.
INP
GA
GB
OUT
NC
VSSA
VDDA
Gain Control
x0.5, x1, x2, x4
-
+
VDDA/2
VDDA/2
VDDA/2
-
+
VDDA/2
INN
AS1716