- 您現在的位置：買賣IC網 > PDF目錄381305 > AS1529-BTDT (AUSTRIAMICROSYSTEMS AG) μPower 10-Bit 2-CH 150ksps SE; Package Type: TDFN(3x3)-8 PDF資料下載
參數資料
| 型號： | AS1529-BTDT |
| 廠商： | AUSTRIAMICROSYSTEMS AG |
| 元件分類： | ADC |
| 英文描述： | μPower 10-Bit 2-CH 150ksps SE; Package Type: TDFN(3x3)-8 |
| 中文描述： | 微功率，10位，150ksps器，ADC，單端或差分 |
| 封裝： | TDFN(3x3)-8 |
| 文件頁數： | 11/21頁 |
| 文件大?。?/td> | 619K |
| 代理商： | AS1529-BTDT |
www.austriamicrosystems.com
Revision 1.02
11 - 21
AS1528/AS1529
Datasheet - Detailed Description
Figure 18. Single Conversion – AIN1 vs. GND (AS1529), Unipolar Mode AIN+ vs. AIN- (AS1528)
If AIN2 is selected
(see Figure 19)
, drive CNVST high for at least 30ns. Next, drive CNVST low for at least 30ns, and
then high again. This powers up the AS1529 and places the track/hold circuitry in track mode with AIN2 connected to
the positive input capacitor. Next hold CNVST high for
tACQ
to fully acquire the signal. Drive CNVST low to place the
track/hold circuitry in hold mode. The AS1529 then performs a conversion and shuts down automatically. The MSB is
available at DOUT after 3.7μs. Data can then be clocked out using SCLK.
Note:
If all 12 bits of data are not clocked out before CNVST is driven high, AIN2 is selected for the next conversion.
Selecting Unipolar or Bipolar Conversions (AS1528)
True-differential conversion (with the AS1528 unipolar and bipolar modes) is selected using pin CNVST
(see page 3)
.
AIN+ and AIN- are sampled at the falling edge of CNVST. In unipolar mode, AIN+ can exceed AIN- by up to VREF. The
output format is straight binary. In bipolar mode, either input can exceed the other by up to V
REF/2
. The output format is
two’s complement. In both modes, the input common mode range can go from GND to V
DD
.
Figure 19. Single Conversion – AIN2 vs. GND (AS1529), Bipolar Mode AIN+ vs. AIN- (AS1528)
Note:
In unipolar and bipolar modes, AIN+ and AIN- must not exceed V
DD
by more than 50mV or be lower than GND
by more than 50mV.
If unipolar mode is selected
(see Figure 18)
, drive CNVST high to power up the AS1528 and place the track/hold cir-
cuitry in track mode with AIN+ and AIN- connected to the input capacitors. Hold CNVST high for
tACQ
to fully acquire
the signal. Drive CNVST low to place the track/hold circuitry in hold mode. The AS1528 then performs a conversion
and shutdown automatically. The MSB is available at DOUT after 3.7μs. Data can then be clocked out using SCLK.
Clock out all 12 bits of data before driving CNVST high for the next conversion. If all 12 bits of data are not clocked out
before CNVST is driven high, bipolar mode is selected for the next conversion.
If bipolar mode is selected
(see Figure 19)
, drive CNVST high for at least 30ns. Next, drive CNVST low for at least
30ns and then high again. This places the track/hold circuitry in track mode with AIN+ and AIN- connected to the input
capacitors.
Next hold CNVST high for
tACQ
to fully acquire the signal. Drive CNVST low to place the track/hold circuitry in hold
mode. The AS1528 then performs a conversion and shuts down automatically. The MSB is available at DOUT after
3.7μs. Data can then be clocked out using SCLK.
Note:
If all 12 bits of data are not clocked out before CNVST is driven high, bipolar mode is selected for the next con-
version.
SCLK
CNVST
Sampling Instant
t
CONV
t
ACQ
1
4
8
12
DOUT
High Z
High Z
B8
B7
B6
B5
B4
B3
B2
B1
B9
MSB
B0
LSB
ZERO ZERO
DOUT
SCLK
CNVST
B8
B7
B6
B5
B4
B3
B2
B1
B9
MSB
B0
LSB
Sampling Instant
t
CONV
t
ACQ
1
4
8
12
High Z
High Z
ZERO ZERO
相關PDF資料 |
PDF描述 |
|---|---|
| AS1531-T | 12-Bit, 8-Channels ADC 300ksps; Package Type: TSSOP-20 |
| AS1530-T | 12-Bit, 8-Channels ADC 400ksps; Package Type: TSSOP-20 |
| AS1532-T | 12-Bit, 4-CH, ADC 400ksps; Package Type: TSSOP-16 |
| AS1533-T | 12-Bit, 4-CH, ADC, 300ksps; Package Type: TSSOP-16 |
| AS1538-BTST | 12-bit, 8-CH, 50ksps ADC, I2C; Package Type: TSSOP-16 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AS152R3FLF | 制造商:TT Electronics / IRC 功能描述:AS152R3FLF |
| AS152R3HLF | 制造商:TT Electronics / IRC 功能描述:AS152R3HLF |
| AS152R3JLF | 制造商:TT Electronics / IRC 功能描述:AS152R3JLF |
| AS153 | 制造商:Hubbell Wiring Device-Kellems 功能描述:ROTARY DIMMER, 3 WAY, 1500W, BE |
| AS1530 | 功能描述:模數轉換器 - ADC RoHS:否 制造商:Texas Instruments 通道數量:2 結構:Sigma-Delta 轉換速率:125 SPs to 8 KSPs 分辨率:24 bit 輸入類型:Differential 信噪比:107 dB 接口類型:SPI 工作電源電壓:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-32 |
發布緊急采購，3分鐘左右您將得到回復。