參數資料
型號： AS1339-BWLT
廠商： AUSTRIAMICROSYSTEMS AG
元件分類： DC/DC變換器
英文描述： 650mA Buck+2x10mA LDOs RF-PA; Package Type: CS-WLP-16
封裝： CS-WLP-16
文件頁數： 19/25頁
文件大?。?/td> 4057K
代理商： AS1339-BWLT
wwwaustriamcrosystems.com/DC-DC_Step-Down/AS1339
Revision 1.05
19 - 25
AS1339
Datasheet - Application Information
Capacitor Selection for LDO’s
Input Capacitor
The capacitor for the LDO Input should have at least a value of the sum of the output capacitors of LDO1 and LDO2.
With a larger input capacitance and lower ESR a better noise rejection and line transient response can be achieved.
Output Capacitor
For the LDO outputs the capacitor value depends on the needed load current. For a stable operation with rated maxi-
mum load currents a minimum output capacitor of 1μF is recommended. At light loads of 10mA or less a 0.1μF capac-
itor is sufficient. With larger output capacitance a reduced output noise, improved load-transient response, better
stability and power-supply rejection can be achieved.
Inductor Selection
For most applications the value of the external inductor should be in the range of 1.5μH to 4.7μH as the inductor value
has a direct effect on the ripple current. The selected inductor must be rated for its DC resistance and saturation cur-
rent. The inductor ripple current (
Δ
I
L
) decreases with higher inductance and increases with higher V
IN
to V
OUT
.
In
Equation (EQ 3)
the maximum inductor current in PWM mode under static load conditions is calculated. The satura-
tion current of the inductor should be rated higher than the maximum inductor current as calculated with
Equation (EQ
4)
. This is recommended because the inductor current will rise above the calculated value during heavy load tran-
sients.
The inductor current ripple
Δ
I
L
(see EQ 3)
is defined by the slope of the current (dI / dt)
(see EQ 1)
multiplied by the
PFET on-time t
ON
(see EQ 2)
.
Figure 51. Ripple Current Diagram
Table 7. Recommended Capacitors for the LDO’s
Name
Part Number
C
Voltage
Type
Size
Manufacturer
KEMET
Murata
相關PDF資料
PDF描述
AS1340A-BTDT-10 50V, 100mA, 1MHz, Boost
AS1341-BTDT 20V, Hyst.600mA Buck Converter; Package Type: TDFN(3x3)-8
AS1343A-BTDT-10 42V, 1MHz, Single Cell, Boost; Package Type: TDFN(3x3)-10; Temperature Range: -40 - +85 °C; Dimension: 3 x 3 mm; Shutdown: Yes; Output Current: 140mA; Output Range: 5.5 to 42V; Supply Voltage: 0,90-3,60
AS1344-BTDT 42V DCDC for OLED; Package Type: TDFN(3x3)-10
AS1351-T Dual LDO with OTP 1.8 to 3.3V; Package Type: QFN(3x3)-12; Output Range: 2 x 3,3V
相關代理商/技術參數
參數描述
AS1339-DB 制造商:ams 功能描述:Evaluation Board
AS1339-EB 功能描述:電源管理IC開發工具 AS1339 Evaluation Board RoHS:否 制造商:Maxim Integrated 產品:Evaluation Kits 類型:Battery Management 工具用于評估:MAX17710GB 輸入電壓: 輸出電壓:1.8 V
AS133R0HLF 制造商:TT Electronics / IRC 功能描述:AS133R0HLF
AS133R0JLF 制造商:TT Electronics / IRC 功能描述:AS133R0JLF
AS133R2FLF 制造商:TT Electronics / IRC 功能描述:AS133R2FLF
發布緊急采購，3分鐘左右您將得到回復。