參數資料
型號： AS1333-BWLT
廠商： AUSTRIAMICROSYSTEMS AG
元件分類： DC/DC變換器
英文描述： 650mA, RF, Buck Converter; Package Type: CS-WLP(1.5x1.5)-8; Output Range: 3.09V
封裝： CS-WLP(1.5x1.5)-8
文件頁數： 12/17頁
文件大?。?/td> 727K
代理商： AS1333-BWLT
wwwaustriamcrosystems.com/DC-DC_Step-Down/AS1333
Revision 1.06
12 - 17
AS1333
Datasheet - Application Information
9 Application Information
9.1 Inductor Selection
For the external inductor, a 3.3μH inductor is recommended. Mnimuminductor size is dependant on the desired efficiency and output current.
Inductors with low core losses and small DCR at 2MHz are recommended.
9.2 Capacitor Selection
A 10μF capacitor is recommended for C
IN
as well as a 10μF for C
OUT
. Small-sized X5R or X7R ceramc capacitors are recommended as they
retain capacitance over wide ranges of voltages and temperatures.
9.2.1 Input and Output Capacitor Selection
Low ESR input capacitors reduce input switching noise and reduce the peak current drawn fromthe battery. Also low ESR capacitors should be
used to mnimze V
OUT
ripple. Multi-layer ceramc capacitors are recommended since they have extremely low ESR and are available in small
footprints.
For input decoupling the ceramc capacitor should be located as close to the device as practical. A 4.7μF input capacitor is sufficient for most
applications. Larger values may be used without limtations.
A 2.2μF to 10μF output ceramc capacitor is sufficient for most applications. Larger values up to 22μF may be used to obtain extremely low out-
put voltage ripple and improve transient response.
9.3 EN Pin Control
Drive the EN pin using the systemcontroller to turn the AS1333 ON and OFF. Use a comparator, Schmdt trigger or logic gate to drive the EN pin.
Set EN high (>1.2V) for normal operation and low (<0.5V) for a 0.01μA (typ.) shutdown mode. Set EN low to turn off the AS1333 during power-
up and under voltage conditions when the power supply is less than the 2.7V mnimumoperating voltage. The part is out of regulation when the
input voltage is less than 2.7V.
Table 5. Recommended Inductor
Part Number
LPS4018-222ML_
LPS4018-332ML_
LPS4018-472ML_
L
DCR
0.070Ω
0.080Ω
0.125Ω
Current Rating
2.9A
2.4A
1.9A
Dimensions (L/W/T)
3.9x3.9x1.7mm
3.9x3.9x1.7mm
3.9x3.9x1.7mm
Manufacturer
2.2μH
3.3μH
4.7μH
Coilcraft
Table 6. Recommended Input and Output Capacitor
相關PDF資料
PDF描述
AS1334-BTDT-30 650mA LowRipple Buck Converter
AS1335-BTDT-100 1.5A Buck Converter
AS1335-BTDT-AD 1.5A Buck Converter
AS1339-BWLT 650mA Buck+2x10mA LDOs RF-PA; Package Type: CS-WLP-16
AS1340A-BTDT-10 50V, 100mA, 1MHz, Boost
相關代理商/技術參數
參數描述
AS1333-BWLT EB 制造商:ams 功能描述:Evaluation Board
AS1333-EB 制造商:ams 功能描述:AS1333 Evaluation Board
AS1334 制造商:AMSCO 制造商全稱:austriamicrosystems AG 功能描述:650mA, Ultra low Ripple Step Down DC/DC Converter
AS1334-BTDT 功能描述:IC REG BUCK SYNC ADJ 0.65A 8TDFN RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - DC DC 開關穩壓器 系列:- 標準包裝:50 系列:- 類型:升壓（升壓） 輸出類型:可調式 輸出數:1 輸出電壓:5 V ~ 25 V 輸入電壓:2.3 V ~ 5.5 V PWM 型:電流模式 頻率 - 開關:600kHz，1.2MHz 電流 - 輸出:1A 同步整流器:無 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP，8-MSOP（0.118"，3.00mm 寬） 包裝:管件 供應商設備封裝:8-MSOP
AS1334-BTDT-12 制造商:AMSCO 制造商全稱:austriamicrosystems AG 功能描述:650mA, Ultra low Ripple Step Down DC/DC Converter
發布緊急采購，3分鐘左右您將得到回復。