- 您現在的位置：買賣IC網 > PDF目錄378404 > AN912 (Microchip Technology Inc.) Designing LF Talkback for a Magnetic Base Station PDF資料下載
參數資料
| 型號： | AN912 |
| 廠商： | Microchip Technology Inc. |
| 英文描述： | Designing LF Talkback for a Magnetic Base Station |
| 中文描述： | 對講設計為低頻磁場基站 |
| 文件頁數： | 1/16頁 |
| 文件大?。?/td> | 382K |
| 代理商： | AN912 |
2004 Microchip Technology Inc.
DS00912A-page 1
AN912
INTRODUCTION
This application note builds on application note AN232
Low
Frequency
Magnetic
(DS00232). It covers the design process to implement
LF Talkback functionality. AN232 covers some of the
magnetism basics and design principles to implement
the drive circuitry. LF Talkback generally refers to the
process in which a transponder can communicate back
to a magnetic transmitter base station by loading the
generated magnetic field. By measuring the small
changes in the transmitter coil's voltage, used to gener-
ate the field, the communications’ data is extracted. LF
Talkback is commonly used in RFID, automotive
transponders, active transponders, and many other
bidirectional LF communications topologies.
This document will cover the different stages needed to
implement a typical LF Talkback system and explain
the process in choosing the different stage characteris-
tics. It explains the various performance and cost trade-
offs made for the reference design and how it can be
adapted to better suit the readers needs.
Transmitter
Design
MAIN BUILDING BLOCKS
Figure 1 shows the main building blocks that make up
the LF Talkback system described in this document.
The base station generates a strong magnetic field by
setting up resonance in a serial resonant tank. The
circulating energy in the resonant tank typically gener-
ates 300V peak-to-peak voltage across the transmitting
antenna coil at 125 kHz. The transponder, whether
active or passive, is magnetically coupled to the base
station’s transmitting coil and the transponder’s
magnetic loading has a small effect on the quality factor
(Q) of the transmitter resonant tank. Talkback is
accomplished by changing or modulating the magnetic
loading and can be observed as small voltage changes
across the base station's resonant transmitter coil. The
difficulty is to detect a few mV of modulation on the
300V peak-to-peak carrier.
FIGURE 1:
Author:
Ruan Lourens
Microchip Technology Inc.
V
REF
Data
Transponder
Base Station
M
Peak
Detector
DC
Decouple
Low Pass
Filter
Data
Slicer
Data
Designing LF Talkback for a Magnetic Base Station
相關PDF資料 |
PDF描述 |
|---|---|
| AN939 | Designing Energy Meters with the PIC16F873A |
| AND8001 | ODD NUMBER DIVIDE BY COUNTERS WITH 50% OUTPUTS AND SYNCHRONOUS CLOCKS |
| AND8001D | ODD NUMBER DIVIDE BY COUNTERS WITH 50% OUTPUTS AND SYNCHRONOUS CLOCKS |
| AND8002 | ECLinPS, ECLinPS Lite, ECLinPS Plus ECLinPS MAX, and GigaComm Marking and Ordering Information Guide |
| AND8002D | ECLinPS, ECLinPS Lite, ECLinPS Plus ECLinPS MAX, and GigaComm Marking and Ordering Information Guide |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AN912-11D | 制造商: 功能描述: |
| AN912-1D | 制造商:AN# - MILITARY 功能描述: |
| AN912-2D | 制造商: 功能描述: |
| AN912-2S | 制造商:AN# - MILITARY 功能描述: |
| AN912-3J | 制造商:NEW SURPLUS HARDWARE 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。