參數資料
型號： AM29F200B-120SEB
英文描述： x8/x16 Flash EEPROM
中文描述： x8/x16閃存EEPROM
文件頁數： 15/39頁
文件大?。?/td> 728K
代理商： AM29F200B-120SEB
Am29F002B/Am29F002NB
15
Erase Suspend/Erase Resume Commands
The Erase Suspend command allows the system to
interrupt a sector erase operation and then read data
from, or program data to, any sector not selected for
erasure. This command is valid only during the sector
erase operation, including the 50 μs time-out period
during the sector erase command sequence. The
Erase Suspend command is ignored if written during
the chip erase operation or Embedded Program algo-
rithm. Writing the Erase Suspend command during the
Sector Erase time-out immediately terminates the
time-out period and suspends the erase operation.
Addresses are “don’t-cares” when writing the Erase
Suspend command.
When the Erase Suspend command is written during a
sector erase operation, the device requires a maximum
of 20 μs to suspend the erase operation. However,
when the Erase Suspend command is written during
the sector erase time-out, the device immediately ter-
minates the time-out period and suspends the erase
operation.
After the erase operation has been suspended, the
system can read array data from or program data to
any sector not selected for erasure. (The device “erase
suspends” all sectors selected for erasure.) Normal
read and write timings and command definitions apply.
Reading at any address within erase-suspended
sectors produces status data on DQ7–DQ0. The
system can use DQ7, or DQ6 and DQ2 together, to
determine if a sector is actively erasing or is erase-sus-
pended. See “Write Operation Status” for information
on these status bits.
After an erase-suspended program operation is com-
plete, the system can once again read array data within
non-suspended sectors. The system can determine
the status of the program operation using the DQ7 or
DQ6 status bits, just as in the standard program oper-
ation. See “Write Operation Status” for more
information.
The system may also write the autoselect command
sequence when the device is in the Erase Suspend
mode. The device allows reading autoselect codes
even at addresses within erasing sectors, since the
codes are not stored in the memory array. When the
device exits the autoselect mode, the device reverts to
the Erase Suspend mode, and is ready for another
valid operation. See “Autoselect Command Sequence”
for more information.
The system must write the Erase Resume command
(address bits are “don’t care”) to exit the erase suspend
mode and continue the sector erase operation. Further
writes of the Resume command are ignored. Another
Erase Suspend command can be written after the
device has resumed erasing.
相關PDF資料
PDF描述
AM29F200B-120SI 12V Single N-Channel HEXFET Power MOSFET in a SO-8 package; Similar to IRF7476 with Lead Free Packaging
AM29F200B-150EC 30V Single N-Channel HEXFET Power MOSFET in a SO-8 package; Similar to IRF7807A with Lead Free Packaging
AM29F200B-150EE 55V Single N-Channel HEXFET Power MOSFET in a TO-262 package; A IRFZ46ZL with Standard Packaging
AM29F200B-150EEB 55V Single N-Channel HEXFET Power MOSFET in a TO-262 package; Similar to IRFZ46ZL with Lead Free Packaging
AM29F200B-150EI 30V Single N-Channel HEXFET Power MOSFET in a I-Pak package; Similar to IRLU3303 with Lead Free Packaging
相關代理商/技術參數
參數描述
AM29F200BB-120EC 制造商:Advanced Micro Devices 功能描述:
AM29F200BB-120SI 制造商:Spansion 功能描述:NOR Flash Parallel 5V 2Mbit 256K/128K x 8bit/16bit 120ns 44-Pin SOIC
AM29F200BB-120SI\T 制造商:Spansion 功能描述:Flash Mem Parallel 5V 2M-Bit 256K x 8/128K x 16 120ns 44-Pin SOIC T/R
AM29F200BB-45SI 制造商:Advanced Micro Devices 功能描述:
AM29F200BB-55EF 功能描述:閃存 2M (256KX8/128KX16) Parallel NOR Fl 5V RoHS:否 制造商:ON Semiconductor 數據總線寬度:1 bit 存儲類型:Flash 存儲容量:2 MB 結構:256 K x 8 定時類型: 接口類型:SPI 訪問時間: 電源電壓-最大:3.6 V 電源電壓-最小:2.3 V 最大工作電流:15 mA 工作溫度:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體: 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*