
Description
The AH266 is an integrated Hall sensor with output driver
designed for electronic commutation of brushless DC
motor applications. The device includes an on-chip Hall
sensor for magnetic sensing, an amplifier that amplifies
the Hall voltage, a Schmitt trigger to provide switching
hysteresis for noise rejection and two complementary
darlington open-collector drivers for sinking large load
current. It also includes an internal band-gap regulator
which is used to provide bias voltage for internal circuits
and allows a wide operating supply voltage ranges.
Placing the device in a variable magnetic field, if the mag-
netic flux density is larger than threshold B
OP
, the pin DO
will be turned low (on) and pin DOB will be turned high
(off). This output state is held until the magnetic flux den-
sity reverses and falls below B
RP,
then causes DO to be
turned high (off) and DOB turned low (on).
Features
·
·
·
·
On-Chip Hall Sensor
4V to 30V Supply Voltage
400mA (avg) Output Sink Current
Build in Protection Diode for Reverse Power
Connecting
-20
o
C to 85
o
C Operating Temperature
Low Profile TO-94 (SIP-4L) Package
Build in Over Temperature Protection Function
ESD Rating: 300V(Machine Model)
·
·
·
·
Applications
·
·
·
·
12V/24V Dual-Coil Brushless DC Motor/Fan
Power Supply and Switchboard
Communications Facilities
Industrial Equipment
Benefits
·
·
Good High Temperature Performance
With Over Temperature Protection (OTP)
Function
Low Supply Current
High Driver Capability with Darlington Output
Cost Effect Solution for High Voltage (24V) and
Temperature (85
o
C)
·
·
·
Parametric Table
Supply Current (mA)
3.5
Output Saturation Voltage
(24V, 300mA) (V)
0.9
Hysteresis (Gauss)
80
Output Leakage Current (
μ
A
)
0.1
Package
TO-94
Additional Available Materials
·
·
·
·
Samples
Data Sheet
Reliability Report
ESD Report
Feb. 2007
BCD Semiconductor Manufacturing Limited
Product Brief
HIGH VOLTAGE HALL EFFECT LATCH AH266