參數資料
型號: AFCT-5745AUPZ
元件分類: 光收發
英文描述: FIBER OPTIC TRANSCEIVER, 1500-1580nm, 2700Mbps(Tx), 2700Mbps(Rx), BOARD/PANEL MOUNT, LC CONNECTOR
封裝: ROHS COMPLIANT PACKAGE-20
文件頁數: 9/18頁
文件大?。?/td> 518K
代理商: AFCT-5745AUPZ
Application Information
The Applications Engineering Group at Avago is available
to assist you with technical understanding and design
trade-offs associated with these transceivers. You can con-
tact them through your Avago sales representative.
The following information is provided to answer some of
the most common questions about the use of parts.
Optical Power Budget
The worst-case Optical Power Budget (OPB) in dB for a
fiber-optic link is determined by the difference between
the minimum transmitter output optical power (dBm avg)
and the lowest receiversensitivity (dBm avg). This OPB
provides the necessary optical signal range to establish a
working fiber-optic link. The OPB is allocated for the fiber-
optic cable length and the corresponding link penalties.
For proper link performance, all penalties that affect the
link performance must be accounted for within the link
optical power budget.
Process Plug
This transceiver is supplied with a process plug for protec-
tion of the optical port within the LC connector receptacle.
This process plug prevents contamination during standard
process handling, shipping and storage.
LC SFP Cleaning Recommendations
In the event of contamination of the optical ports, the rec-
ommended cleaning process is the use of forced nitrogen.
If contamination is thought to have remained, the optical
ports can be cleaned using a NTT international Cletop stick
type (diam. 1.25 mm) and HFE7100 cleaning fluid.
Customer Manufacturing Processes
This module is pluggable and is not designed for aqueous
wash, IR reflow or wave soldering processes.
Caution
There are no user serviceable parts nor any maintenance
required for the AFCT-5745Z. Tampering with or modifying
the performance of the AFCT-5745Z will result in voided
product warranty. It may also result in improper operation
of the AFCT-5745Z circuitry, and possible overstress of the
laser source. Device degradation or product failure may
result. Connection of the AFCT-5745Z to a non-approved
optical source, operating above the recommended abso-
lute maximum conditions or operating the AFCT-5745Z in
a manner inconsistent with its design and function may
result in hazardous radiation exposure and may be consid-
ered an act of modifying or manufacturing a laser product.
The person(s) performing such an act are required by law
to re-certify and re-identify the laser product under the
provisions of U.S. 21 CFR (Subchapter J) and the TUV.
相關PDF資料
PDF描述
AFCT-5745PZ FIBER OPTIC TRANSCEIVER, 1270-1360nm, 2700Mbps(Tx), 2700Mbps(Rx), BOARD/PANEL MOUNT, LC CONNECTOR
AFCT-57M5ATPZ FIBER OPTIC TRANSMITTER, 1280-1345nm, 1593Mbps, LC CONNECTOR
AFCT-5942AGZ FIBER OPTIC TRANSCEIVER, 1260-1570nm, 2488Mbps(Tx), 2488Mbps(Rx), BOARD/PANEL MOUNT, DIP, LC CONNECTOR
AFD50 FEMALE; MALE, MIL SERIES CONNECTOR, SOLDER, RECEPTACLE
AFF-L160BB113 FIBER OPTIC FIXED ATTENUATOR, 1570-1605nm, PANEL MOUNT, FC/APC CONNECTOR
相關代理商/技術參數
參數描述
AFCT-5745PZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFCT-5745TPZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFCT-5750ALZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFCT-5750APZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFCT-5750ATLZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: