參數資料
型號: AFBR-742BEHZ
元件分類: 光接收
英文描述: FIBER OPTIC RECEIVER, 830-860nm, 2500Mbps, BOARD/PANEL MOUNT
封裝: ROHS COMPLIANT PACKAGE-20
文件頁數: 17/22頁
文件大?。?/td> 484K
代理商: AFBR-742BEHZ
4
Electromagnetic Interference (EMI)
Many equipment designs using these high-data-rate
modules will be required to meet the requirements of the
FCC in the United States, CENELEC in Europe and VCCI in
Japan. These modules, with their shielded design, perform
to the levels detailed in the Regulatory Compliance Table.
The performance detailed in the Regulatory Compliance
Table is intended to assist the equipment designer in the
management of the overall equipment EMI performance.
However, system margins are dependent on the customer
board and chassis design.
Immunity
Equipment using these modules will be subject to radio
frequency electromagnetic fields in some environments.
These modules have good immunity due to their shielded
designs. See the Regulatory Compliance Table for further
detail.
Eye Safety
These 850 nm VCSEL-based modules provide eye safety
by design. The AFBR-732BWZ has been registered with
CDRH and certified by TUV as a Class 1M device under
Amendment 2 of IEC 60825-1. See the Regulatory Com-
pliance Table for further detail. If Class 1M exposure is
possible, a safety-warning label should be placed on the
product stating the following:
LASER RADIATION
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
Connector Cleaning
The optical connector used is the MTP (MPO). The optical
ports have recessed optics that are visible through the
nose of the ports. The provided port plug should be
installed any time a fiber cable is not connected. The port
plug ensures the optics remain clean and no cleaning
should be necessary. In the event the optics become
contaminated, forced nitrogen or clean dry air at less than
20 psi is the recommended cleaning agent. The optical
port features, including guide pins, preclude use of any
solid instrument. Liquids are not advised due to potential
damage.
Process Plug
Each parallel optics module is supplied with an inserted
process plug for protection of the optical ports within the
MTP (MPO) connector receptacle.
Handling Precautions
The AFBR-732BWZ and AFBR-742BZ can be damaged by
current surges and overvoltage conditions. Power supply
transient precautions should be taken.
Application of wave soldering, reflow soldering and/or
aqueous wash processes with the parallel optic device on
board is not recommended as damage may occur.
Normal handling precautions for electrostatic sensitive
devices should be taken (see ESD section).
The AFBR-732BWZ is a Class 1M laser product.
DO NOT VIEW RADIATION DIRECTLY WITH OPTICAL IN-
STRUMENTS.
相關PDF資料
PDF描述
AFBR-732BEWZ FIBER OPTIC TRANSMITTER, 830-860nm, 2500Mbps, BOARD/PANEL MOUNT
AFBR-732BWZ FIBER OPTIC TRANSMITTER, 830-860nm, 2500Mbps, BOARD/PANEL MOUNT
AFBR-79Q4Z FIBER OPTIC TRANSCEIVER, 10000Mbps(Tx), 10000Mbps(Rx), SURFACE MOUNT
AFCT-5715LZ FIBER OPTIC TRANSCEIVER, 1270-1355nm, 1250Mbps(Tx), PANEL MOUNT, LC CONNECTOR
AFCT-5715PZ FIBER OPTIC TRANSCEIVER, 1270-1355nm, 1250Mbps(Tx), PANEL MOUNT, LC CONNECTOR
相關代理商/技術參數
參數描述
AFBR-742BEZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFBR-742BHZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFBR-742BZ 功能描述:光纖發射器、接收器、收發器 Transceiver RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝:
AFBR-75NEKZ 制造商:Avago Technologies 功能描述:MCLINK- LIGHT PEAK EVALUATION KIT - Bulk
AFBR-75REKZ 制造商:Avago Technologies 功能描述:2-CH G3 MCLINK EVALUATION KIT - Bulk