- 您現在的位置：買賣IC網 > PDF目錄375265 > ADS7845E TOUCH SCREEN CONTROLLER PDF資料下載
參數資料
| 型號： | ADS7845E |
| 英文描述： | TOUCH SCREEN CONTROLLER |
| 中文描述： | 觸摸屏控制器 |
| 文件頁數： | 9/12頁 |
| 文件大?。?/td> | 173K |
| 代理商： | ADS7845E |
9
ADS7845
single-ended mode, the converter’s reference voltage is
always the difference between the V
REF
and GND pins. In
differential mode, the reference voltage is the difference
between the currently enabled switches. See Tables I and II
and Figures 2 through 4 for more information. The last two
bits (PD1 - PD0) select the power- down mode as shown in
Table V. If both inputs are HIGH, the device is always
powered up. If both inputs are LOW, the device enters a
power-down mode between conversions. When a new con-
version is initiated, the device will resume normal operation
instantly—no delay is needed to allow the device to power
up and the very first conversion will be valid. There are two
power-down modes: one where PENIRQ is disabled and
one where it is enabled.
PD1
0
PD0
0
PENIRQ
Enabled
DESCRIPTION
Power-down between conversions. When each
conversion is finished, the converter enters a
LOW power mode. At the start of the next con-
version, the device instantly powers up to full
power. There is no need for additional delays to
assure full operation and the very first conversion
is valid. The LR– switch is on while in power-down.
0
1
Disabled
Same as mode 00, except PENIRQ is disabled.
The LR– switch is off while in power-down mode.
1
0
Disabled
Reserved for future use.
1
1
Disabled
No power down between conversions, device is
always powered.
FIGURE 5. Conversion Timing, 24 Clocks per Conversion, 8-Bit Bus Interface. No DCLK Delay Required with Dedicated
Serial Port.
TABLE V. Power-Down Selection.
FIGURE 6. Conversion Timing, 16 Clocks per Conversion, 8-Bit Bus Interface. No DCLK Delay Required with Dedicated
Serial Port.
1
DCLK
CS
8
1
11
DOUT
BUSY
S
DIN
CONTROL BITS
S
CONTROL BITS
10
9
8
7
6
5
4
3
2
1
0
11 10
9
8
1
1
8
t
ACQ
Acquire
Idle
Conversion
Idle
1
DCLK
CS
8
1
11
DOUT
BUSY
DRIVERS 1 AND 2(1)
(SER/DFR HIGH)
DRIVERS 1 AND 2(1, 2)
(SER/DFR LOW)
(MSB)
(START)
(LSB)
A2
S
ON
ON
OFF
OFF
OFF
OFF
DIN
A1
A0
MODEDFR
PD1 PD0
10
9
8
7
6
5
4
3
2
1
0
Zero Filled...
8
1
8
NOTES: (1) For Y Position, Driver 1 is ON and Driver 2 is OFF. For X Position, Driver 1 is OFF and Driver 2 is ON. LR
will turn on when power-down mode is entered and PD1, PD0 = 00
. (2) Drivers will remain on if power-down mode is
11
B
(no power down) until selected input channel, reference mode, or power-down mode is changed, or CS is HIGH.
相關PDF資料 |
PDF描述 |
|---|---|
| ADS7846IGQCR | TOUCH-SCREEN CONTROLLER |
| ADS7846IRGVR | TOUCH-SCREEN CONTROLLER |
| ADS7846IRGVT | TOUCH-SCREEN CONTROLLER |
| ADS7846N | TOUCH-SCREEN CONTROLLER |
| ADS7846 | CMOS 8-Stage Presettable 8-Bit Binary Synchronous Down Counter 16-TSSOP -55 to 125 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADS7845E | 制造商:Texas Instruments 功能描述:5 WIRE TOUCH SCREEN CONTR 16SSOP 制造商:Texas Instruments 功能描述:5 WIRE TOUCH SCREEN CONTR, 16SSOP 制造商:Texas Instruments 功能描述:5 WIRE TOUCH SCREEN CONTR, 16SSOP; Interface Type:5 Wire, Serial, SPI; Resolution (Bits):12bit; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Digital IC Case Style:MSOP; No. of Pins:16; Operating Temperature Min:-40C; Operating ;RoHS Compliant: Yes |
| ADS7845E | 制造商:Texas Instruments 功能描述:IC's |
| ADS7845E/2K5 | 功能描述:觸摸屏轉換器和控制器 5-wire Touch Screen Controller RoHS:否 制造商:Microchip Technology 類型:Resistive Touch Controllers 輸入類型:3 Key 數據速率:140 SPS 分辨率:10 bit 接口類型:4-Wire, 5-Wire, 8-Wire, I2C, SPI 電源電壓:2.5 V to 5.25 V 電源電流:17 mA 工作溫度:- 40 C to + 85 C 封裝 / 箱體:SSOP-20 |
| ADS7845E/2K5G4 | 功能描述:觸摸屏轉換器和控制器 5-wire Touch Screen Controller RoHS:否 制造商:Microchip Technology 類型:Resistive Touch Controllers 輸入類型:3 Key 數據速率:140 SPS 分辨率:10 bit 接口類型:4-Wire, 5-Wire, 8-Wire, I2C, SPI 電源電壓:2.5 V to 5.25 V 電源電流:17 mA 工作溫度:- 40 C to + 85 C 封裝 / 箱體:SSOP-20 |
| ADS7845EG4 | 功能描述:觸摸屏轉換器和控制器 5-wire Touch Screen Controller RoHS:否 制造商:Microchip Technology 類型:Resistive Touch Controllers 輸入類型:3 Key 數據速率:140 SPS 分辨率:10 bit 接口類型:4-Wire, 5-Wire, 8-Wire, I2C, SPI 電源電壓:2.5 V to 5.25 V 電源電流:17 mA 工作溫度:- 40 C to + 85 C 封裝 / 箱體:SSOP-20 |
發布緊急采購，3分鐘左右您將得到回復。