- 您現在的位置：買賣IC網 > PDF目錄2140 > ADMP521ACEZ-RL7 (Analog Devices Inc)IC MEMS MICROPHONE ULTRA LN 5LGA PDF資料下載
參數資料
| 型號： | ADMP521ACEZ-RL7 |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 6/17頁 |
| 文件大小： | 0K |
| 描述： | IC MEMS MICROPHONE ULTRA LN 5LGA |
| 標準包裝： | 1,000 |
| 系列： | ADMP521 |
| 類型： | MEMS（硅） |
| 輸出類型： | 數字 |
| 方向： | 全向 |
| 頻率范圍： | 100Hz ~ 16kHz |
| 靈敏度： | -26dB ±3dB |
| 信噪比： | 65dB |
| 電壓 - 額定： | 1.8 ~ 3.3V |
| 電流 - 電源： | 1.2mA |
| 端口位置： | 底部 |
| 密封等級： | 無 |
| 端子： | 焊盤 |
| 尺寸/尺寸： | 0.157" L x 0.118" W（4.00mm x 3.00mm） |
| 高度（最大）： | 0.043"（1.10mm） |
| 形狀： | 矩形 |
| 包裝： | 帶卷 (TR) |
Data Sheet
ADMP521
Rev. A | Page 13 of 16
HANDLING INSTRUCTIONS
PICK-AND-PLACE EQUIPMENT
The MEMS microphone can be handled using standard pick-and-
place and chip shooting equipment. Take care to avoid damage to
the MEMS microphone structure as follows:
Use a standard pickup tool to handle the microphone.
Because the microphone hole is on the bottom of the
package, the pickup tool can make contact with any part
of the lid surface.
Use care during pick-and-place to ensure that no high shock
events above 10 kg are experienced because such events
may cause damage to the microphone.
Do not pick up the microphone with a vacuum tool that
makes contact with the bottom side of the microphone.
Do not pull air out of or blow air into the microphone port.
Do not use excessive force to place the microphone on
the PCB.
REFLOW SOLDER
For best results, the soldering profile should be in accordance with
the recommendations of the manufacturer of the solder paste used
to attach the MEMS microphone to the PCB. It is recommended
that the solder reflow profile not exceed the limit conditions
specified in Figure 4 and Table 4.
BOARD WASH
When washing the PCB, ensure that water does not make contact
with the microphone port. Do not use blow-off procedures and
ultrasonic cleaning.
OBSOLETE
相關PDF資料 |
PDF描述 |
|---|---|
| ADN2890ACP-RL7 | IC AMP LIM 16LFCSP |
| ADN2891ACPZ-500RL7 | IC AMP LIM 16LFCSP |
| ADN2892ACPZ-500RL7 | IC AMP LIM 16LFCSP |
| ADR827BRMZ-REEL7 | IC OPAMP GP R-R 1MHZ LP 10MSOP |
| ADTL084ARZ-REEL7 | IC OPAMP JFET 5MHZ QUAD 14SOIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADMP522ACEZ-RL7 | 制造商:InvenSense Inc 功能描述:MIC MEMS DIGITAL OMNI -26DB 制造商:Analog Devices 功能描述:MICROPHONE 2 CH LGA_CAV-5 制造商:Analog Devices 功能描述:MICROPHONE, 2 CH , LGA_CAV-5 制造商:Analog Devices 功能描述:+/- 1dB Sens PDM-o/pt 65dB SNR MEMS MI 制造商:Analog Devices 功能描述:MEMS MICROPHONE, 1.62V-3.63V, LGA-5, IC Function:MEMS Microphone, Brief Features:-, Supply Voltage Min:1.62V, Supply Voltage Max:3.63V, Operating Temperature Min:-40C, Operating Temperature Max:85C, Digital IC Case Style:LGA |
| ADMP621 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Wide Dynamic Range Microphone with PDM Digital Output |
| ADMP621ACEZ-RL | 制造商:AD 制造商全稱:Analog Devices 功能描述:Wide Dynamic Range Microphone with PDM Digital Output |
| ADMP621ACEZ-RL7 | 制造商:Analog Devices 功能描述:MICROPHONE, 2 CH , LGA_CAV-5 |
| ADMP803JCEZ-RL | 制造商:Analog Devices 功能描述:IC MEMS OMNI MICHROPHONE SMD 制造商:Analog Devices 功能描述:Hearing aid low noise |
發布緊急采購，3分鐘左右您將得到回復。