- 您現在的位置：買賣IC網 > PDF目錄6685 > ADMP504ACEZ-RL7 (Analog Devices Inc)MIC MEMS OMNI-DIR ANALOG 3LGA PDF資料下載
參數資料
| 型號： | ADMP504ACEZ-RL7 |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 13/13頁 |
| 文件大?。?/td> | 0K |
| 描述： | MIC MEMS OMNI-DIR ANALOG 3LGA |
| 標準包裝： | 1 |
| 系列： | ADMP504 |
| 類型： | MEMS（硅） |
| 輸出類型： | 模擬 |
| 方向： | 全向 |
| 頻率范圍： | 100Hz ~ 20kHz |
| 靈敏度： | -38dB ±3dB |
| 信噪比： | 65dB |
| 阻抗： | 200 歐姆 |
| 電壓 - 額定： | 1.8 ~ 3.3V |
| 電流 - 電源： | 225µA |
| 端口位置： | 底部 |
| 密封等級： | 無 |
| 端子： | 表面貼裝型 |
| 尺寸/尺寸： | 3.35mm L x 2.50mm W |
| 高度（最大）： | 0.98mm |
| 形狀： | 矩形 |
| 包裝： | 標準包裝 |
| 其它名稱： | ADMP504ACEZ-RL7DKR |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁當前第13頁
ADMP504
Data Sheet
Rev. A | Page 8 of 12
HANDLING INSTRUCTIONS
PICK-AND-PLACE EQUIPMENT
The MEMS microphone can be handled using standard pick-
and-place and chip shooting equipment. Take care to avoid
damage to the MEMS microphone structure as follows:
Use a standard pickup tool to handle the microphone.
Because the microphone hole is on the bottom of the
package, the pickup tool can make contact with any part
of the lid surface.
Use care during pick-and-place to ensure that no high
shock events above 10 kg are experienced because this may
cause damage to the microphone.
Do not pick up the microphone with a vacuum tool that
makes contact with the bottom side of the microphone.
Do not pull air out or blow air into the microphone port.
Do not use excessive force to place the microphone
on the PCB.
REFLOW SOLDER
For best results, the soldering profile should be in accordance
with the recommendations of the manufacturer of the solder
paste used to attach the MEMS microphone to the PCB. It is
recommended that the solder reflow profile not exceed the
limit conditions specified in Figure 3 and Table 3.
BOARD WASH
When washing the PCB, ensure that water does not make
contact with the microphone port. Blow-off procedures and
ultrasonic cleaning must not be used.
OBSOLETE
相關PDF資料 |
PDF描述 |
|---|---|
| 271I,BK | BOX 6.88X4.88X1.50 9V BLACK |
| RM839730 | RELAY GEN PURPOSE DPDT 25A 230V |
| 271I,AL | BOX 6.88X4.88X1.50 9V ALMOND |
| AT62-16-0622 | CONN FEMALE 18-20AWG NICKEL PLTE |
| RM808LB2 | RELAY GEN PURPOSE DPDT 25A 12V |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADMP504XCEZ-RL7 | 制造商:Analog Devices 功能描述:- Tape and Reel |
| ADMP510 | 制造商:AD 制造商全稱:Analog Devices 功能描述:RF Hardened, Ultralow Noise Microphone with Bottom Port and Analog Output |
| ADMP510ACEZ-RL | 制造商:AD 制造商全稱:Analog Devices 功能描述:RF Hardened, Ultralow Noise Microphone with Bottom Port and Analog Output |
| ADMP510ACEZ-RL7 | 制造商:AD 制造商全稱:Analog Devices 功能描述:RF Hardened, Ultralow Noise Microphone with Bottom Port and Analog Output |
| ADMP521 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Ultralow Noise Microphone |
發布緊急采購，3分鐘左右您將得到回復。