- 您現在的位置：買賣IC網 > PDF目錄11222 > ADG333ABRS-REEL (Analog Devices Inc)IC SWITCH QUAD SPDT 20SSOP PDF資料下載
參數資料
| 型號： | ADG333ABRS-REEL |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 3/12頁 |
| 文件大小： | 0K |
| 描述： | IC SWITCH QUAD SPDT 20SSOP |
| 產品培訓模塊： | Switch Fundamentals |
| 標準包裝： | 1,500 |
| 功能： | 開關 |
| 電路： | 4 x SPDT - NC/NO |
| 導通狀態電阻： | 35 歐姆 |
| 電壓電源： | 單/雙電源 |
| 電壓 - 電源，單路/雙路(±)： | 12V，±1.5 V ~ 10 V |
| 電流 - 電源： | 50nA |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 20-SSOP（0.209"，5.30mm 寬） |
| 供應商設備封裝： | 20-SSOP |
| 包裝： | 帶卷 (TR) |
ADG333A
Rev. A | Page 11 of 12
APPLICATION INFORMATION
ADG333A SUPPLY VOLTAGES
The ADG333A can operate from a dual or signal supply. VSS
should be connected to GND when operating with a single
supply. When using a dual supply, the ADG333A can also
operate with unbalanced supplies; for example VDD = 20 V and
VSS = 5 V. The only restrictions are that VDD to GND must not
exceed 30 V, VSS to GND must not drop below 30 V, and VDD
to VSS must not exceed +44 V. It is important to remember that
the ADG333A supply voltage directly affects the input signal
range, the switch on resistance and the switching times of the
part. The effects of the power supplies on these characteristics
can be clearly seen from the Typical Performance Characteristics
curves.
POWER SUPPLY SEQUENCING
When using CMOS devices, care must be taken to ensure
correct power-supply sequencing. Incorrect power-supply
sequencing can result in the device being subjected to stresses
beyond those listed in the Absolute Maximum Ratings. This is
also true for the ADG333A. Always turn on VDD first, followed
by VSS and the logic signals. An external signal within the maxi-
mum specified ratings can then be safely presented to the source
or drain of the switch
相關PDF資料 |
PDF描述 |
|---|---|
| ADG333ABR-REEL | IC SWITCH QUAD SPDT 20SOIC |
| ADG1434YCPZ-REEL | IC SWITCH QUAD SPDT 20LFCSP |
| ADG221KR | IC SWITCH QUAD SPST 16SOIC |
| AD8185ARU-REEL7 | IC MULTIPLEXER TRPL 2X1 24TSSOP |
| LTC1393IGN#TR | IC MULTIPLEXER DUAL 4X1 16SSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADG333ABRSZ | 功能描述:IC SWITCH QUAD SPDT 20SSOP RoHS:是 類別:集成電路 (IC) >> 接口 - 模擬開關，多路復用器，多路分解器 系列:- 特色產品:MicroPak? 標準包裝:1 系列:- 功能:開關 電路:2 x SPST - NC 導通狀態電阻:500 毫歐 電壓電源:單電源 電壓 - 電源，單路/雙路(±):1.4 V ~ 4.3 V 電流 - 電源:150nA 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-XFDFN 供應商設備封裝:8-XSON，SOT833-1 （1.95x1） 包裝:Digi-Reel® 其它名稱:568-5557-6 |
| ADG333ABRSZ | 制造商:Analog Devices 功能描述:Multiplexer IC |
| ADG333ABRSZ1 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Quad SPDT Switch |
| ADG333ABRSZ-REEL | 功能描述:IC SWITCH QUAD SPDT 20SSOP RoHS:是 類別:集成電路 (IC) >> 接口 - 模擬開關，多路復用器，多路分解器 系列:- 其它有關文件:STG4159 View All Specifications 標準包裝:5,000 系列:- 功能:開關 電路:1 x SPDT 導通狀態電阻:300 毫歐 電壓電源:雙電源 電壓 - 電源，單路/雙路(±):±1.65 V ~ 4.8 V 電流 - 電源:50nA 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:7-WFBGA，F(xiàn)CBGA 供應商設備封裝:7-覆晶 包裝:帶卷 (TR) |
| ADG333ABRSZ-REEL1 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Quad SPDT Switch |
發布緊急采購，3分鐘左右您將得到回復。