IDD The positive supply current. I<" />
參數資料
型號: ADG1201BRJZ-R2
廠商: Analog Devices Inc
文件頁數: 4/16頁
文件大小: 0K
描述: IC SWITCH SPST NO SOT23
標準包裝: 1
系列: iCMOS®
功能: 開關
電路: 1 x SPST - NO
導通狀態電阻: 475 歐姆
電壓電源: 單/雙電源
電壓 - 電源,單路/雙路(±): 12V,±15V
電流 - 電源: 60µA
工作溫度: -40°C ~ 125°C
安裝類型: 表面貼裝
封裝/外殼: SOT-23-6
供應商設備封裝: SOT-23-6
包裝: 標準包裝
其它名稱: ADG1201BRJZ-R2DKR
ADG1201/ADG1202
Rev. 0 | Page 12 of 16
TERMINOLOGY
IDD
The positive supply current.
ISS
The negative supply current.
VD (VS)
The analog voltage on Terminal D and Terminal S.
RON
The ohmic resistance between D and S.
RFLAT(ON)
Flatness is defined as the difference between the maximum and
minimum value of on resistance, as measured over the specified
analog signal range.
IS (Off)
The source leakage current with the switch off.
ID (Off)
The drain leakage current with the switch off.
ID, IS (On)
The channel leakage current with the switch on.
VINL
The maximum input voltage for Logic 0.
VINH
The minimum input voltage for Logic 1.
IINL (IINH)
The input current of the digital input.
CS (Off)
The off switch source capacitance, measured with reference
to ground.
CD (Off)
The off switch drain capacitance, measured with reference
to ground.
CD, CS (On)
The on switch capacitance, measured with reference to ground.
CIN
The digital input capacitance.
tON
The delay between applying the digital control input and the
output switching on. See Figure 26.
tOFF
The delay between applying the digital control input and the
output switching off. See Figure 26.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch.
THD + N
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
ACPSRR (AC Power Supply Rejection Ratio)
Measures the ability of a part to avoid coupling noise and
spurious signals that appear on the supply voltage pin to the
output of the switch. The dc voltage on the device is modulated
by a sine wave of 0.62 V p-p. The ratio of the amplitude of
signal on the output to the amplitude of the modulation is
the ACPSRR.
相關PDF資料
PDF描述
ADG1204YRUZ-REEL7 IC MULTIPLEXER 4X1 14TSSOP
ADG1207YRUZ-REEL7 IC MULTIPLEXER DUAL 8X1 28TSSOP
ADG1209YRZ IC MULTIPLEXER DUAL 4X1 16SOIC
ADG1213YCPZ-500RL7 IC SWITCH QUAD SPST 16LFCSP
ADG1219BRJZ-REEL7 IC SWITCH SPDT SOT23-8
相關代理商/技術參數
參數描述
ADG1201BRJZ-REEL7 功能描述:IC SWITCH SPST NO SOT23 RoHS:是 類別:集成電路 (IC) >> 接口 - 模擬開關,多路復用器,多路分解器 系列:iCMOS® 標準包裝:1,000 系列:- 功能:多路復用器 電路:1 x 4:1 導通狀態電阻:- 電壓電源:雙電源 電壓 - 電源,單路/雙路(±):±5V 電流 - 電源:7mA 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-SOIC(0.154",3.90mm 寬) 供應商設備封裝:16-SOIC 包裝:帶卷 (TR)
ADG1202 制造商:AD 制造商全稱:Analog Devices 功能描述:Low Capacitance, Low Charge Injection, 【15 V/+12 V iCMOS SPST in SOT-23
ADG1202BRJZ-R2 制造商:Analog Devices 功能描述:ANLG SW SGL SPST 16.5V/16.5V - Tape and Reel
ADG1202BRJZ-REEL7 制造商:Analog Devices 功能描述:ANLG SW SGL SPST 16.5V/16.5V - Tape and Reel
ADG1204 制造商:AD 制造商全稱:Analog Devices 功能描述:2 pF Off Capacitance, 1 pC Charge Injection, +-15 V/12 V 4:1 iCMOS Multiplexer