參數資料
型號: ADC0833
廠商: National Semiconductor Corporation
英文描述: 8-Bit Serial I/O A/D Converter with 4-Channel Multiplexer
中文描述: 8位串行I /辦公自動化/ D的4通道多路復用器
文件頁數: 10/20頁
文件大小: 316K
代理商: ADC0833
Functional Description
(Continued)
Since the input configuration is under software control, it
can be modified, as required, at each conversion. A channel
can be treated as a single-ended, ground referenced input
for one conversion; then it can be reconfigured as part of a
differential channel for another conversion. Figure 1 illus-
trates the input flexibility which can be achieved.
The analog input voltages for each channel can range from
50 mV below ground to 50mV above V
CC
(typically 5V) with-
out degrading conversion accuracy.
2.0 THE DIGITAL INTERFACE
A most important characteristic of these converters is their
serial data link with the controlling processor. Using a serial
communication format offers two very significant system im-
provements; it allows more function to be included in the
converter package with no increase in package size and it
can eliminate the transmission of low level analog signals by
locating the converter right at the analog sensor; transmit-
ting highly noise immune digital data back to the host proc-
essor.
To understand the operation of these converters it is best to
refer to the Timing Diagram and Functional Block Diagram
and to follow a complete conversion sequence.
1. A conversion is initiated by first pulling the CS (chip se-
lect) line low. This line must be held low for the entire con-
version. The converter is now waiting for a start bit and its
MUX assignment word.
2. A clock is then generated by the processor (if not provid-
ed continuously) and output to the A/D clock input.
3. On each rising edge of the clock the status of the data in
(DI) line is clocked into the MUX address shift register. The
start bit is the first logic ‘‘1’’ that appears on this line (all
leading zeros are ignored). Following the start bit the con-
verter expects the next 4 bits to be the MUX assignment
word.
4 Single-Ended
2 Differential
Mixed Mode
TL/H/5607–6
FIGURE 1. Analog Input Multiplexer Options for the ADC0833
10
相關PDF資料
PDF描述
ADC0833BCN 8-Bit Serial I/O A/D Converter with 4-Channel Multiplexer
ADC0833CCJ 8-Bit Serial I/O A/D Converter with 4-Channel Multiplexer
ADC0833CCN 8-Bit Serial I/O A/D Converter with 4-Channel Multiplexer
ADC08351 8-Bit, 42 MSPS, 40 mW A/D Converter
ADC08351CIMTC 8-Bit, 42 MSPS, 40 mW A/D Converter
相關代理商/技術參數
參數描述
ADC0833BCN 制造商:NSC 制造商全稱:National Semiconductor 功能描述:8-Bit Serial I/O A/D Converter with 4-Channel Multiplexer
ADC0833BCN/A+ 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog-to-Digital Converter, 8-Bit
ADC0833BCN/B+ 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog-to-Digital Converter, 8-Bit
ADC0833CCJ 制造商:NSC 制造商全稱:National Semiconductor 功能描述:8-Bit Serial I/O A/D Converter with 4-Channel Multiplexer
ADC0833CCN 制造商: 功能描述: 制造商:undefined 功能描述: