- 您現在的位置：買賣IC網 > PDF目錄8973 > AD9764ARUZ (Analog Devices Inc)IC DAC 14BIT 125MSPS 28-TSSOP PDF資料下載
參數資料
| 型號： | AD9764ARUZ |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 3/22頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC DAC 14BIT 125MSPS 28-TSSOP |
| 產品培訓模塊： | Data Converter Fundamentals DAC Architectures |
| 標準包裝： | 50 |
| 系列： | TxDAC® |
| 設置時間： | 35ns |
| 位數： | 14 |
| 轉換器數目： | 1 |
| 電壓電源： | 模擬和數字 |
| 功率耗散（最大）： | 170mW |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 28-TSSOP（0.173"，4.40mm 寬） |
| 供應商設備封裝： | 28-TSSOP |
| 包裝： | 管件 |
| 輸出數目和類型： | 2 電流，單極；2 電流，雙極 |
| 采樣率（每秒）： | 125M |
| 產品目錄頁面： | 785 (CN2011-ZH PDF) |
REV. B
AD9764
–11–
The second method may be used in a dual-supply system in
which the common-mode voltage of REFIO is fixed, and IREF is
varied by an external voltage, VGC, applied to RSET via an ampli-
fier. An example of this method is shown in Figure 26 in which
the internal reference is used to set the common-mode voltage
of the control amplifier to 1.20 V. The external voltage, VGC, is
referenced to ACOM and should not exceed 1.2 V. The value of
RSET is such that IREFMAX and IREFMIN do not exceed 62.5
A
and 625
A, respectively. The associated equations in Figure 26
can be used to determine the value of RSET.
50pF
COMP1 AVDD
REFLO
CURRENT
SOURCE
ARRAY
AVDD
REFIO
FS ADJ
RSET
AD9764
IREF
OPTIONAL
BANDLIMITING
CAPACITOR
VGC
1 F
IREF = (1.2–VGC)/RSET
WITH VGC < VREFIO AND 62.5 A
IREF
625A
+1.2V REF
Figure 26. Dual-Supply Gain Control Circuit
In some applications, the user may elect to use an external
control amplifier to enhance the multiplying bandwidth,
distortion performance and/or settling time. External amplifiers
capable of driving a 50 pF load such as the AD817 are suitable
for this purpose. It is configured in such a way that it is in
parallel with the weaker internal reference amplifier as shown in
Figure 27. In this case, the external amplifier simply overdrives
the weaker reference control amplifier. Also, since the internal
control amplifier has a limited current output, it will sustain no
damage if overdriven.
50pF
COMP1
+1.2V REF
AVDD
REFLO
CURRENT
SOURCE
ARRAY
AVDD
REFIO
FS ADJ
RSET
AD9764
VREF
INPUT
EXTERNAL
CONTROL AMPLIFIER
Figure 27. Configuring an External Reference Control
Amplifier
ANALOG OUTPUTS
The AD9764 produces two complementary current outputs,
IOUTA and IOUTB, which may be configured for single-end
or differential operation. IOUTA and IOUTB can be converted into
complementary single-ended voltage outputs, VOUTA and
VOUTB, via a load resistor, RLOAD, as described in the DAC
Transfer Function section by Equations 5 through 8. The
differential voltage, VDIFF, existing between VOUTA and VOUTB
can also be converted to a single-ended voltage via a transformer
or differential amplifier configuration.
Figure 28 shows the equivalent analog output circuit of the
AD9764 consisting of a parallel combination of PMOS differen-
tial current switches associated with each segmented current
source. The output impedance of IOUTA and IOUTB is determined
by the equivalent parallel combination of the PMOS switches
and is typically 100 k
in parallel with 5 pF. Due to the na-
ture of a PMOS device, the output impedance is also slightly
dependent on the output voltage (i.e., VOUTA and VOUTB) and, to
a lesser extent, the analog supply voltage, AVDD, and full-scale
current, IOUTFS. Although the output impedance’s signal depen-
dency can be a source of dc nonlinearity and ac linearity (i.e.,
distortion), its effects can be limited if certain precautions are
noted.
AD9764
AVDD
IOUTA
IOUTB
RLOAD
Figure 28. Equivalent Analog Output Circuit
IOUTA and IOUTB also have a negative and positive voltage compli-
ance range. The negative output compliance range of –1.0 V is
set by the breakdown limits of the CMOS process. Operation
beyond this maximum limit may result in a breakdown of the
output stage and affect the reliability of the AD9764. The posi-
tive output compliance range is slightly dependent on the full-
scale output current, IOUTFS. It degrades slightly from its nominal
1.2V
50pF
COMP1
+1.2V REF
AVDD
REFLO
CURRENT
SOURCE
ARRAY
AVDD
REFIO
FS ADJ
RSET
AD9764
IREF =
VREF/RSET
AVDD
OPTIONAL
BANDLIMITING
CAPACITOR
VREF
VDD
RFB
OUT1
OUT2
AGND
DB7–DB0
AD7524
AD1580
0.1V TO 1.2V
Figure 25. Single-Supply Gain Control Circuit
相關PDF資料 |
PDF描述 |
|---|---|
| M83723/85G10056 | CONN RCPT 5POS JAM NUT W/PINS |
| VE-JTY-MZ-F4 | CONVERTER MOD DC/DC 3.3V 16.5W |
| ICS843004AGILFT | IC SYNTHESIZER LVPECL 24-TSSOP |
| LTC2614IGN-1#PBF | IC DAC 14BIT QUAD R-R 16-SSOP |
| MS3124E16-8S | CONN RCPT 8POS JAM NUT W/SCKT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD9764ARUZRL7 | 功能描述:IC DAC 14BIT 125MSPS 28-TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:TxDAC® 標準包裝:47 系列:- 設置時間:2µs 位數:14 數據接口:并聯 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:55µW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:28-SSOP 包裝:管件 輸出數目和類型:1 電流，單極；1 電流，雙極 采樣率（每秒）:* |
| AD9764ARZ | 功能描述:IC DAC 14BIT 125MSPS 28-SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:TxDAC® 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 設置時間:4µs 位數:12 數據接口:串行 轉換器數目:2 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP，8-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:8-uMAX 包裝:管件 輸出數目和類型:2 電壓，單極 采樣率（每秒）:* 產品目錄頁面:1398 (CN2011-ZH PDF) |
| AD9764ARZRL | 功能描述:IC DAC 14BIT 125MSPS 28SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:TxDAC® 標準包裝:47 系列:- 設置時間:2µs 位數:14 數據接口:并聯 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:55µW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:28-SSOP 包裝:管件 輸出數目和類型:1 電流，單極；1 電流，雙極 采樣率（每秒）:* |
| AD9764-EB | 制造商:Analog Devices 功能描述: |
| AD9764-EBZ | 功能描述:BOARD EVAL FOR AD9764 RoHS:是 類別:編程器，開發系統 >> 評估板 - 數模轉換器 (DAC) 系列:TxDAC® 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- DAC 的數量:4 位數:12 采樣率（每秒）:- 數據接口:串行，SPI? 設置時間:3µs DAC 型:電流/電壓 工作溫度:-40°C ~ 85°C 已供物品:板 已用 IC / 零件:MAX5581 |
發布緊急采購，3分鐘左右您將得到回復。