參數資料
型號: AD8402ARU100-REEL
廠商: ANALOG DEVICES INC
元件分類: 數字電位計
英文描述: DUAL 100K DIGITAL POTENTIOMETER, 3-WIRE SERIAL CONTROL INTERFACE, 256 POSITIONS, PDSO14
封裝: 1.10 MM, MO-153AB-1, TSSOP-14
文件頁數: 16/32頁
文件大?。?/td> 603K
代理商: AD8402ARU100-REEL
AD8400/AD8402/AD8403
Rev. E | Page 23 of 32
1k
Ω
DIGITAL
PINS
LOGIC
01
09
2-
05
0
Figure 51. Equivalent ESD Protection Circuits
20
Ω
A,B,W
01
09
2
-05
1
Figure 52. Equivalent ESD Protection Circuit (Analog Pins)
A
CA
CB
W
RDAC
10k
Ω
B
CW
120pF
CA = 90.4pF (DW/256) + 30pF
CB = 90.4pF [1 – (DW/256)] + 30pF
01
09
2-
05
2
Figure 53. RDAC Circuit Simulation Model for RDAC = 10 kΩ
The AC characteristics of the RDAC are dominated by the
internal parasitic capacitances and the external capacitive loads.
The 3 dB bandwidth of the AD8403AN10 (10 kΩ resistor)
measures 600 kHz at half scale as a potentiometer divider.
Figure 30 provides the large signal Bode plot characteristics
of the three available resistor versions 10 kΩ, 50 kΩ, and 100 kΩ.
The gain flatness vs. frequency graph of the 1 kΩ version predicts
filter applications performance (see Figure 33). A parasitic
simulation model has been developed and is shown in Figure 53.
Listing I provides a macro model net list for the 10 kΩ RDAC.
Listing I. Macro Model Net List for RDAC
.PARAM DW=255, RDAC=10E3
*
.SUBCKT DPOT (A,W,)
*
CA A 0 {DW/256*90.4E-12+30E-12}
RAW A W {(1-DW/256)*RDAC+50}
CW W 0 120E-12
RBW W B {DW/256*RDAC+50}
CB B 0 {(1-DW/256)*90.4E-12+30E-12}
*
.ENDS DPOT
The total harmonic distortion plus noise (THD + N), shown in
Figure 41, is measured at 0.003% in an inverting op amp circuit
using an offset ground and a rail-to-rail OP279 amplifier.
Thermal noise is primarily Johnson noise, typically 9 nV/√Hz
for the 10 kΩ version at f = 1 kHz. For the 100 kΩ device,
thermal noise becomes 29 nV/√Hz. Channel-to-channel
crosstalk measures less than 65 dB at f = 100 kHz. To achieve
this isolation, the extra ground pins provided on the package to
segregate the individual RDACs must be connected to circuit
ground. AGND and DGND pins should be at the same voltage
potential. Any unused potentiometers in a package should be
connected to ground. Power supply rejection is typically 35 dB
at 10 kHz. Care is needed to minimize power supply ripple in
high accuracy applications.
相關PDF資料
PDF描述
AD9874ABSTZ SPECIALTY TELECOM CIRCUIT, PQFP48
AD9874ABSTZRL SPECIALTY TELECOM CIRCUIT, PQFP48
ADC0831CIWM 1-CH 8-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO14
ADE7116ASTZF8-RL SPECIALTY ANALOG CIRCUIT, PQFP64
ADE7753ARSZRL SPECIALTY ANALOG CIRCUIT, PDSO20
相關代理商/技術參數
參數描述
AD8402ARU100Z 制造商:Analog Devices 功能描述:DUAL 8-BIT POTENTIOMETER
AD8402ARU100Z-REEL 制造商:Analog Devices 功能描述:DUAL 8-BIT POTENTIOMETER
AD8402ARU10-REEL 功能描述:IC POT DIG DUAL 10K 8BIT 14TSSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:2,500 系列:XDCP™ 接片:256 電阻(歐姆):100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C(設備位址) 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR)
AD8402ARU10Z 制造商:Analog Devices 功能描述:DIG POT 256 DUAL 10KOHM 14 制造商:Analog Devices 功能描述:DIG POT, 256, DUAL, 10KOHM, 14TSSOP; End To End Resistance:10kohm; Track Taper:Linear; Resistance Tolerance:(Not Available); Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Potentiometer IC Case Style:TSSOP; No. of Pins:14; No. of ;RoHS Compliant: Yes 制造商:Analog Devices 功能描述:DIG POT, 256, DUAL, 10KOHM, 14TSSOP; End To End Resistance:10kohm; Track Taper:Linear; Resistance Tolerance:-; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Potentiometer IC Case Style:TSSOP; No. of Pins:14; No. of Steps:256; ;RoHS Compliant: Yes
AD8402ARU1-REEL 制造商:Analog Devices 功能描述:Digital Potentiometer 256POS 1KOhm Dual 14-Pin TSSOP T/R 制造商:Analog Devices 功能描述:DUAL 8-BIT POTENTIOMETER TAPE & REEL - Tape and Reel