- 您現在的位置：買賣IC網 > PDF目錄375242 > AD8145YCPZ-RL (ANALOG DEVICES INC) High Speed, Triple Differential Receiver with Comparators PDF資料下載
參數資料
| 型號： | AD8145YCPZ-RL |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 運動控制電子 |
| 英文描述： | High Speed, Triple Differential Receiver with Comparators |
| 中文描述： | COMPARATOR, 6 ns RESPONSE TIME, QCC32 |
| 封裝： | 5 X 5 MM, LEAD FREE, MO-220VHHD-2, LFCSP-32 |
| 文件頁數： | 15/24頁 |
| 文件大?。?/td> | 473K |
| 代理商： | AD8145YCPZ-RL |
AD8145
APPLICATIONS
OVERVIEW
The AD8145 contains three independent active feedback amplifiers
that can be effectively applied as differential line receivers for
red-green-blue (RGB) signals or component video signals, such
as YPbPr, transmitted over unshielded twisted pair (UTP) cable.
The AD8145 also contains two general-purpose comparators
with hysteresis that can be used to receive digital signals or to
extract video synchronization pulses from received common-
mode signals that contain encoded synchronization signals.
The comparators, which receive power from the positive
supply, are referenced to GND and require greater than 4.5 V
on the positive supply for proper operation. If the comparators
are not used, then a split ±2.5 V can be used with the amplifiers
operating normally.
The AD8145 includes a power-down feature that can be
asserted to reduce the supply current when a particular device
is not in use.
BASIC CLOSED-LOOP GAIN CONFIGURATIONS
Each amplifier in the AD8145 comprises two transconductance
amplifiers—one for the input signal and one for negative feedback.
It is important to note that the closed-loop gain of the amplifier
used in the signal path is defined as the single-ended output
voltage of the amplifier divided by its differential input voltage.
Therefore, each amplifier in the AD8145 provides differential-
to-single-ended gain. Additionally, the amplifier used for
feedback has two high impedance inputs—the feedback input,
where the negative feedback is applied, and the REF input,
which can be used as an independent single-ended input to
apply a dc offset to the output signal.
The AD8145 contains on-chip feedback networks between each
amplifier output and its respective feedback input. Closed-loop
gain of an amplifier is set to 1 by connecting the amplifier output
directly to its respective GAIN pin. Doing this places the on-
chip resistors and capacitor in parallel across the amplifier
output and feedback pin. The small feedback capacitor
mitigates the effects of summing-node capacitance, which is
most problematic in the unity gain case. Closed-loop gain of an
amplifier is set to 2 by connecting the respective GAIN pin to a
reference voltage, often directly to ground. In Figure 1, R = 350 Ω
and C = 2 pF.
Some basic gain configurations implemented with an AD8145
amplifier are shown in Figure 33 through Figure 36.
Rev. 0 | Page 15 of 24
GAIN
REF
R
R
0.01μF
0.01μF
+5V
–5V
C
OUT
V
OUT
V
IN
V
REF
0
Figure 33. Basic Gain = 1 Circuit: V
OUT
= V
IN
+ V
REF
The gain equation for the circuit in Figure 33 is
V
OUT
=
V
IN
+
V
REF
In this configuration, the voltage applied to the REF pin appears
at the output with a gain of 1.
Figure 34 illustrates one way to operate an AD8145 amplifier
with a gain of 2.
(1)
GAIN
REF
R
R
0.01μF
0.01μF
+5V
–5V
C
V
REF
V
OUT
V
IN
0
Figure 34. Basic Gain = 2 Circuit: V
OUT
= 2(V
IN
+ V
REF
)
The gain equation for the circuit in Figure 34 is
V
OUT
= 2(
V
IN
+
V
REF
)
(2)
相關PDF資料 |
PDF描述 |
|---|---|
| AD8153 | 3.2 Gbps Single Buffered Mux/Demux Switch |
| AD8153_07 | 3.2 Gbps Single Buffered Mux/Demux Switch |
| AD8153ACPZ | 3.2 Gbps Single Buffered Mux/Demux Switch |
| AD8153ACPZ-RL7 | 3.2 Gbps Single Buffered Mux/Demux Switch |
| AD8153-EVALZ | 3.2 Gbps Single Buffered Mux/Demux Switch |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD8146 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Triple Differential Driver for Wideband Video |
| AD8146ACPZ-R2 | 功能描述:IC DRIVER TRPL DIFF VID 24LFCSP RoHS:是 類別:集成電路 (IC) >> 線性 - 放大器 - 視頻放大器和頻緩沖器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 應用:TFT-LCD 面板：VCOM 驅動器 輸出類型:滿擺幅 電路數:1 -3db帶寬:35MHz 轉換速率:40 V/µs 電流 - 電源:3.7mA 電流 - 輸出 / 通道:1.3A 電壓 - 電源，單路/雙路(±):9 V ~ 20 V，±4.5 V ~ 10 V 安裝類型:表面貼裝 封裝/外殼:8-TSSOP，8-MSOP（0.118"，3.00mm 寬）裸露焊盤 供應商設備封裝:8-uMax-EP 包裝:管件 |
| AD8146ACPZ-R7 | 功能描述:IC DRIVER TRIPLE DIFF 24-LFCSP RoHS:是 類別:集成電路 (IC) >> 線性 - 放大器 - 視頻放大器和頻緩沖器 系列:- 標準包裝:1,000 系列:- 應用:驅動器 輸出類型:差分 電路數:3 -3db帶寬:350MHz 轉換速率:1000 V/µs 電流 - 電源:14.5mA 電流 - 輸出 / 通道:60mA 電壓 - 電源，單路/雙路(±):5 V ~ 12 V，±2.5 V ~ 6 V 安裝類型:表面貼裝 封裝/外殼:20-VFQFN 裸露焊盤 供應商設備封裝:20-QFN 裸露焊盤（4x4） 包裝:帶卷 (TR) |
| AD8146ACPZ-RL | 功能描述:IC DVR TRPL DIFF WB VID 24LFCSP RoHS:是 類別:集成電路 (IC) >> 線性 - 放大器 - 視頻放大器和頻緩沖器 系列:- 標準包裝:1,000 系列:- 應用:驅動器 輸出類型:差分 電路數:3 -3db帶寬:350MHz 轉換速率:1000 V/µs 電流 - 電源:14.5mA 電流 - 輸出 / 通道:60mA 電壓 - 電源，單路/雙路(±):5 V ~ 12 V，±2.5 V ~ 6 V 安裝類型:表面貼裝 封裝/外殼:20-VFQFN 裸露焊盤 供應商設備封裝:20-QFN 裸露焊盤（4x4） 包裝:帶卷 (TR) |
| AD8147 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Triple Differential Driver for Wideband Video |
發布緊急采購，3分鐘左右您將得到回復。