• 參數資料
    型號: AD7785BRUZ-REEL
    廠商: Analog Devices Inc
    文件頁數: 17/32頁
    文件大?。?/td> 0K
    描述: IC ADC 20BIT 3CH LN LP 16-TSSOP
    標準包裝: 2,500
    位數: 20
    采樣率(每秒): 470
    數據接口: MICROWIRE?,QSPI?,串行,SPI?
    轉換器數目: 1
    電壓電源: 模擬和數字
    工作溫度: -40°C ~ 105°C
    安裝類型: 表面貼裝
    封裝/外殼: 16-TSSOP(0.173",4.40mm 寬)
    供應商設備封裝: 16-TSSOP
    包裝: 帶卷 (TR)
    輸入數目和類型: 3 個差分,單極;3 個差分,雙極
    配用: EVAL-AD7785EBZ-ND - BOARD EVALUATION FOR AD7785
    AD7785
    Rev. 0 | Page 24 of 32
    Continuous Read
    Rather than write to the communications register to access
    the data each time a conversion is complete, the AD7785
    can be configured so that the conversions are placed on the
    DOUT/RDY line automatically. By writing 01011100 to the
    communications register, the user needs only to apply the 24
    SCLK cycles to the ADC, and the 20-bit result followed by four
    1s is automatically placed on the DOUT/RDY line when a
    conversion is complete. The ADC should be configured for
    continuous conversion mode.
    When DOUT/RDY goes low to indicate the end of a conver-
    sion, sufficient SCLK cycles must be applied to the ADC, and
    the data conversion is placed on the DOUT/RDY line. When
    the conversion is read, DOUT/RDY returns high until the next
    conversion is available. In this mode, the data can be read only
    once. In addition, the user must ensure that the data-word is
    read before the next conversion is complete. If the user has
    not read the conversion before the completion of the next
    conversion, or if insufficient serial clocks are applied to the
    AD7785 to read the word, the serial output register is reset
    when the next conversion is completed, and the new conversion
    is placed in the output serial register.
    To exit the continuous read mode, the instruction 01011000
    must be written to the communications register while the
    DOUT/RDY pin is low. While in the continuous read mode,
    the ADC monitors activity on the DIN line so that it can receive
    the instruction to exit the continuous read mode. Additionally,
    a reset occurs if 32 consecutive 1s are seen on DIN. Therefore,
    DIN should be held low in continuous read mode until an
    instruction is written to the device.
    06721-
    019
    DIN
    SCLK
    DOUT/RDY
    CS
    0x5C
    DATA
    Figure 19. Continuous Read
    相關PDF資料
    PDF描述
    AD7787BRMZ IC ADC 24BIT 2CH LP SIG 10MSOP
    AD7789BRM IC ADC 24BIT LP 10-MSOP
    AD7790BRM IC ADC 16BIT BUFFERED LP 10MSOP
    AD7791BRM IC ADC 24BIT BUFFERED LP 10MSOP
    AD7793BRU IC ADC 24BIT 3CH LP 16-TSSOP
    相關代理商/技術參數
    參數描述
    AD7787 制造商:AD 制造商全稱:Analog Devices 功能描述:Low Power, 2-Channel 24-Bit Sigma-Delta ADC
    AD7787_13 制造商:AD 制造商全稱:Analog Devices 功能描述:Low Power, 2-Channel 24-Bit Sigma-Delta ADC
    AD7787BRM 功能描述:IC ADC 24BIT LP 2CH SIG 10-MSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率(每秒):45k 數據接口:串行 轉換器數目:2 功率耗散(最大):315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端,單極
    AD7787BRM-REEL 功能描述:IC ADC 24BIT LP 2CH SIG 10-MSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率(每秒):45k 數據接口:串行 轉換器數目:2 功率耗散(最大):315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端,單極
    AD7787BRMZ 功能描述:IC ADC 24BIT 2CH LP SIG 10MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率(每秒):45k 數據接口:串行 轉換器數目:2 功率耗散(最大):315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端,單極