True Bipolar Input, 12-/14-Bit,
2-Channel, Simultaneous Sampling SAR ADCs
AD7366-5/AD7367-5
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringementsof patentsorother
rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
2007-2009 Analog Devices, Inc. All rights reserved.
FEATURES
Dual 12-bit/14-bit, 2-channel ADCs
True bipolar analog inputs
Programmable input ranges
±10 V, ±5 V, 0 V to +10 V
±12 V with +3 V external reference
Throughput rate: 500 kSPS
Simultaneous conversion with read in less than 2 μs
High analog input impedance
Low current consumption
5.1 mA typical in normal mode
320 nA typical in shutdown mode
AD7366-5
72 dB SNR at 50 kHz input frequency
12-bit no missing codes
AD7367-5
76 dB SNR at 50 kHz input frequency
14-bit no missing codes
Accurate on-chip reference: 2.5 V ± 0.2%
–40°C to +85°C operation
High speed serial interface
SPI-/QSPI-/MICROWIRE-/DSP-compatible
iCMOS process technology
Available in a 24-lead TSSOP
FUNCTIONAL BLOCK DIAGRAM
V
12-/14-BIT
SUCCESSIVE
APPROXIMATION
ADC
DOUTA
OUTPUT
DRIVERS
CONTROL
LOGIC
T/H
BUF
VA1
VA2
MUX
REF
AD7366-5/AD7367-5
VDRIVE
DCAPA
AVCC
DVCC
BUF
DOUTB
OUTPUT
DRIVERS
12-/14-BIT
SUCCESSIVE
APPROXIMATION
ADC
T/H
VB1
VB2
AGND AGND
VSS
DGND
DCAPB
CS
SCLK
CNVST
BUSY
ADDR
RANGE0
RANGE1
REFSEL
DD
MUX
06
84
2-
0
01
Figure 1.
GENERAL DESCRIPTION
The AD7366-5/AD7367-51 are dual, 12-/14-bit, low power,
successive approximation analog-to-digital converters (ADCs)
that feature throughput rates up to 500 kSPS. Each device contains
two ADCs, which are both preceded by a 2-channel multiplexer,
and a low noise, wide bandwidth, track-and-hold amplifier.
The AD7366-5/AD7367-5 are fabricated on the Analog
Devices, Inc., industrial CMOS process (iCMOS)2, which is
a technology platform combining the advantages of low and
high voltage CMOS. The process allows the parts to accept
high voltage bipolar signals in addition to reducing power
consumption and package size. The AD7366-5/AD7367-5 can
accept true bipolar analog input signals in the ±10 V range,
±5 V range, and 0 V to +10 V range.
1 Protected by U.S. Patent No. 6,731,232.
2 For analog systems designers within industrial/instrumentation equipment
OEMs who need high performance ICs at higher voltage levels, iCMOS is a
technology platform that enables the development of analog ICs capable of
+30 V and operating at ±15 V supplies while allowing dramatic reductions in
power consumption and package size, and increased ac and dc performance.
The devices have an on-chip 2.5 V reference that can be disabled to
allow the use of an external reference. If a 3 V reference is applied
to the DCAPA and DCAPB pins, the AD7366-5/AD7367-5 can
accept a true bipolar ±12 V analog input. Minimum ±12 V VDD
and VSS supplies are required for the ±12 V input range.
PRODUCT HIGHLIGHTS
1.
True bipolar analog input signals can be accepted, as well
as ±10 V, ±5 V, ±12 V (with external reference), and 0 V to
+10 V unipolar signals.
2.
Two complete ADC functions allow simultaneous
sampling and conversion of two channels.
3.
A 500 kSPS serial interface is SPI-/QSPI-/MICROWIRE-/
DSP-compatible.
Table 1. Related Products
Device
Resolution
Throughput Rate
No. of Channels
12-Bit
1 MSPS
Dual, 2-channel
AD7366-5
12-Bit
500 kSPS
Dual, 2-channel
14-Bit
1 MSPS
Dual, 2-channel
AD7367-5
14-Bit
500 kSPS
Dual, 2-channel