- 您現在的位置：買賣IC網 > PDF目錄373894 > AD7244JN (ANALOG DEVICES INC) LC2MOS Dual, Complete, 12-Bit/14-Bit Serial DACs PDF資料下載
參數資料
| 型號： | AD7244JN |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | DAC |
| 英文描述： | LC2MOS Dual, Complete, 12-Bit/14-Bit Serial DACs |
| 中文描述： | DUAL, SERIAL INPUT LOADING, 2 us SETTLING TIME, 14-BIT DAC, PDIP24 |
| 封裝： | 0.300 INCH, PLASTIC, DIP-24 |
| 文件頁數： | 5/12頁 |
| 文件大?。?/td> | 319K |
| 代理商： | AD7244JN |
AD7242/AD7244
REV. A
–5–
AD7242/AD7244 PIN FUNCTION DESCRIPTION
DIP
Pin No.
Mnemonic
Description
1
LDACA
Load DAC, Logic Input. A new word is transferred into DAC Latch A from input Latch A on the fall-
ing edge of this signal. If
LDACA
is hard-wired low, data is transferred from input Latch A to DAC
Latch A on the sixteenth falling edge of TCLKA after
TFSA
goes low.
Transmit Frame Synchronization, Logic Input. This is a frame or synchronization signal for DACA
data with serial data expected after the falling edge of this signal.
Transmit Data, Logic Input. This is the data input which is used in conjunction with
TFSA
and
TCLKA to transfer serial data to input Latch A.
Transmit Clock, Logic Input. Serial data bits for DACA are latched on the falling edge of TCLKA
when
TFSA
is low.
Digital Ground. Both DGND pins for the device must be tied together at the device.
Test Pin 1. Used when testing the device. Do not connect anything to this pin.
Positive Power Supply, 5 V
±
5%. Both V
DD
pins for the device must be tied together at the device.
Analog Ground. Both AGND pins for the device must be tied together at the device.
Analog Output Voltage from DACB. This output comes from a buffer amplifier. The range is bipolar,
±
3 V with REF INB = +3 V.
Negative Power Supply, –5 V
±
5%. Both V
SS
pins for the device must be tied together at the device.
Test Pin 2. Used when testing the device. Do not connect anything to this pin.
DACB Voltage Reference Input. The voltage reference for DACB is applied to this pin. It is internally
buffered before being applied to DACB. The nominal reference voltage for correct operation of the
AD7242/AD7244 is 3 V.
Load DAC, Logic Input. A new word is transferred into DAC Latch B from input Latch B on the fall-
ing edge of this signal. If
LDACB
is hard-wired low, data is transferred from input Latch B to DAC
Latch B on the sixteenth falling edge of TCLKB after
TFSB
goes low.
Transmit Frame Synchronization, Logic Input. This is a frame or synchronization signal for DACB
data with serial data expected after the falling edge of this signal.
Transmit Data, Logic Input. This is the data input used in conjunction with
TFSB
and TCLKB to
transfer serial data to input Latch B.
Transmit Clock, Logic Input. Serial data bits for DACB are latched on the falling edge of TCLKB
when
TFSB
is low.
Digital Ground. Both DGND pins for the device must be tied together at the device.
Test Pin 3. Used when testing the device. Do not connect anything to this pin.
Positive Power Supply, 5 V
±
5%. Both V
DD
pins for the device must be tied together at the device.
Analog Ground. Both AGND pins for the device must be tied together at the device.
Analog Output Voltage from DACA. This output comes from a buffer amplifier. The range is bipolar,
±
3 V with REF INA = +3 V.
Negative Power Supply, –5 V
±
5%. Both V
SS
pins for the device must be tied together at the device.
Voltage Reference Output. To operate the DACs with this internal reference, REF OUT should be
connected to both REF INA and REF INB. The external load capability of the reference is 500
μ
A.
DACA Voltage Reference Input. The voltage reference for DACA is applied to this pin. It is internally
buffered before being applied to DACA. The nominal reference voltage for correct operation of the
AD7242/AD7244 is 3 V.
2
TFSA
3
DTA
4
TCLKA
5
6
7
8
9
DGND
TP1
V
DD
AGND
V
OUTB
10
11
12
V
SS
TP2
REF INB
13
LDACB
14
TFSB
15
DTB
16
TCLKB
17
18
19
20
21
DGND
TP3
V
DD
AGND
V
OUTA
22
23
V
SS
REF OUT
24
REF INA
相關PDF資料 |
PDF描述 |
|---|---|
| AD7244JR | LC2MOS Dual, Complete, 12-Bit/14-Bit Serial DACs |
| AD7244SQ3 | LC2MOS Dual, Complete, 12-Bit/14-Bit Serial DACs |
| AD7242 | LC2MOS Dual, Complete, 12-Bit/14-Bit Serial DACs |
| AD7242AQ | LC2MOS Dual, Complete, 12-Bit/14-Bit Serial DACs |
| AD7242BQ | LC2MOS Dual, Complete, 12-Bit/14-Bit Serial DACs |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7244JNZ | 功能描述:IC DAC 14BIT SERIAL W/REF 24DIP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:1 系列:- 設置時間:4.5µs 位數:12 數據接口:串行，SPI? 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:8-SOICN 包裝:剪切帶 (CT) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:* 其它名稱:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND |
| AD7244JR | 功能描述:IC DAC 14BIT LC2MOS DUAL 28SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1,000 系列:- 設置時間:1µs 位數:8 數據接口:串行 轉換器數目:8 電壓電源:雙 ± 功率耗散（最大）:941mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC W 包裝:帶卷 (TR) 輸出數目和類型:8 電壓，單極 采樣率（每秒）:* |
| AD7244JR-REEL | 制造商:Rochester Electronics LLC 功能描述:- Tape and Reel |
| AD7244JRZ | 功能描述:IC DAC 14BIT LC2MOS DUAL 28SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:1 系列:- 設置時間:4.5µs 位數:12 數據接口:串行，SPI? 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:8-SOICN 包裝:剪切帶 (CT) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:* 其它名稱:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND |
| AD7244JRZ | 制造商:Analog Devices 功能描述:D/A Converter (D-A) IC |
發布緊急采購，3分鐘左右您將得到回復。