- 您現在的位置：買賣IC網 > PDF目錄3429 > AD605BRZ-R7 (Analog Devices Inc)IC AMP VGA DUAL LN 40MA 16SOIC PDF資料下載
參數資料
| 型號： | AD605BRZ-R7 |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 11/25頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC AMP VGA DUAL LN 40MA 16SOIC |
| 標準包裝： | 1,000 |
| 系列： | X-AMP® |
| 放大器類型： | 可變?cè)鲆?br> |
| 電路數： | 2 |
| 轉換速率： | 170 V/µs |
| -3db帶寬： | 40MHz |
| 電流 - 輸入偏壓： | 400nA |
| 電流 - 電源： | 18mA |
| 電流 - 輸出 / 通道： | 40mA |
| 電壓 - 電源，單路/雙路(±)： | 4.5 V ~ 5.5 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 16-SOIC（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 16-SOIC |
| 包裝： | 帶卷 (TR) |
| 配用： | AD605-EVALZ-ND - BOARD EVALUATION FOR AD605 |
AD605
Rev. F | Page 18 of 24
EVALUATION BOARD
The AD605-EVALZ provides a platform for the circuit designer
to become familiar with the many operating and performance
features of the AD605 variable gain amplifier. It is a factory-
designed, surface-mount assembly fully tested and ready for
service. Figure 42 is a photograph of the AD605-EVALZ. Multiple
inputs, test points, and jumpers provide circuit configurations that
support any of the operating options of the device. Figure 43 is a
schematic of the board.
Power is required from only a single 5 V supply capable of
supplying 55 mA to 60 mA quiescent current.
00
541
-04
3
Figure 42. AD605–EVALZ Evaluation Board
INPUT CONNECTIONS
The AD605 VGA accepts differential or single-ended input
signals and provides single-ended outputs. The SMA connectors
enable either configuration to be used, as well as the output and
gain control signals. Each of the I/O ports is also available at a
test-loop labeled for easy identification.
The input resistance at each of the four input SMA connectors is
50 Ω, consisting of the 175 Ω, ±40 Ω resistance of the attenuator
ladder network in parallel with the external 69.8 Ω resistors. For
single-ended operation, unused inputs can be left disconnected
or optional jumpers installed. Either VGA input is usable; for
noninverting operation, the INPx is used, and for signal inversion,
the INMx is used.
ADJUSTING GAIN, COMMON-MODE, AND
REFERENCE LEVELS
The gain of each channel is adjusted with trimmers, GN1ADJ and
GN2ADJ. Trimmer VREF ADJ adjusts the gain scaling in dB/V (or
gain slope), and VOCM ADJ adjusts the output common-mode
voltage for both channels. For dynamic gain control, JP1 and
JP4 can be removed and the signal applied at the SMA
connectors, GN1 and GN2.
OUTPUT CONNECTIONS
SMA connectors, OUT1 and OUT2, are the output connectors.
Series resistors and capacitors are included for termination and
dc blocking purposes. The output of the AD605 has a common-
mode value of one-half the supply (unless amended by a voltage
applied to the VCM pin).
the evaluation board in a typical test configuration.
Table 4. Table of Jumpers
Jumper
Function
Default Configuration
JP1
Connects trimmer GN1ADJ to pin VGN1. This jumper can be removed for an ac signal at VGN1.
Installed
JP2
Grounds the IN1 pin via C2.
User supplied
JP3
Grounds the IN2 pin via C5.
User supplied
JP4
Connects trimmer GN2ADJ to Pin VGN2. This jumper can be removed for an ac signal at VGN2.
Installed
JP5
Connects trimmer VOCMADJ to the VOCM pin. This jumper can be removed for the half supply default VOCM.
Installed
JP6
Shifts the gain of Channel 2 up or down by 14 dB.
Installed
JP7
Shifts the gain of Channel 1 up or down by 14 dB.
Installed
JP8
Connects trimmer VREFADJ to the VREF pin to change the gain slope.
Installed
相關PDF資料 |
PDF描述 |
|---|---|
| TV04A7V5J-G | TVS 400W 7.5V UNIDIRECT 5% SMA |
| RNCF1206BKC1K26 | RES 1.26K OHM 1/8W 0.1% 1206 |
| TV04A750J-G | TVS 400W 75V UNIDIRECT 5% SMA |
| TV04A700J-G | TVS 400W 70V UNIDIRECT 5% SMA |
| TV04A6V5JB-HF | TVS 400W 6.5V BIDIRECT 5% SMA |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD605BRZ-RL | 功能描述:IC AMP VGA DUAL LN 40MA 16SOIC RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:X-AMP® 標準包裝:50 系列:- 放大器類型:J-FET 電路數:2 輸出類型:- 轉換速率:3.5 V/µs 增益帶寬積:1MHz -3db帶寬:- 電流 - 輸入偏壓:30pA 電壓 - 輸入偏移:2000µV 電流 - 電源:200µA 電流 - 輸出 / 通道:- 電壓 - 電源，單路/雙路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:8-DIP（0.300"，7.62mm） 供應商設備封裝:8-PDIP 包裝:管件 |
| AD605BRZ-RL7 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Dual, Low Noise, Single-Supply Variable Gain Amplifier |
| AD605-EB | 制造商:Analog Devices 功能描述: |
| AD605EHDK42GMS | 制造商:Advanced Micro Devices 功能描述:EB E64 4C 605E AM3 45W - Trays |
| AD605-EVALZ | 功能描述:BOARD EVALUATION FOR AD605 RoHS:是 類別:編程器，開發系統 >> 評估板 - 運算放大器 系列:X-AMP® 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- |
發布緊急采購，3分鐘左右您將得到回復。