參數資料
型號： AD5764RCSUZ
廠商： ANALOG DEVICES INC
元件分類： DAC
英文描述： Complete Quad, 16-Bit, High Accuracy, Serial Input, Bipolar Voltage Output DAC
中文描述： SERIAL INPUT LOADING, 8 us SETTLING TIME, 16-BIT DAC, PQFP32
封裝： ROHS COMPLIANT, PLASTIC, MS-026ABA, TQFP-32
文件頁數： 30/32頁
文件大?。?/td> 524K
代理商： AD5764RCSUZ
AD5764R
When data is being transmitted to the AD5764R, the SYNC line
(PC7) is taken low and data is transmitted MSB first. Data
appearing on the MOSI output is valid on the falling edge of
SCK. Eight falling clock edges occur in the transmit cycle, so, in
order to load the required 24-bit word, PC7 is not brought high
until the third 8-bit word has been transferred to the DACs
input shift register.
Rev. PrA | Page 30 of 32
MC68HC11
1
1
ADDITIONAL PINS OMITTED FOR CLARITY
AD5764R
1
SDO
MISO
SDIN
MOSI
SCLK
SCK
SYNC
PC7
0
Figure 41. AD5764R to MC68HC11 Interface
LDAC is controlled by the PC6 port output. The DAC can be
updated after each 3-byte transfer by bringing LDAC low. This
example does not show other serial lines for the DAC. For
example, if CLR were used, it could be controlled by port
output PC5.
AD5764R to 8XC51 Interface
The AD5764R requires a clock synchronized to the serial data.
For this reason, the 8XC51 must be operated in Mode 0. In this
mode, serial data enters and exits through RXD, and a shift
clock is output on TXD.
P3.3 and P3.4 are bit programmable pins on the serial port and
are used to drive SYNC and LDAC, respectively. The 8CX51
provides the LSB of its SBUF register as the first bit in the data
stream. The user must ensure that the data in the SBUF register
is arranged correctly, because the DAC expects MSB first. When
data is to be transmitted to the DAC, P3.3 is taken low. Data on
RXD is clocked out of the microcontroller on the rising edge of
TXD and is valid on the falling edge. As a result, no glue logic is
required between this DAC and the microcontroller interface.
8XC51
1
1
ADDITIONAL PINS OMITTED FOR CLARITY
AD5764R
1
SCLK
TxD
SDIN
RxD
SYNC
P3.3
LDAC
P3.4
0
Figure 42. AD5764R to 8XC51 Interface
The 8XC51 transmits data in 8-bit bytes with only eight falling
clock edges occurring in the transmit cycle. Because the DAC
expects a 24-bit word, SYNC (P3.3) must be left low after the
first eight bits are transferred. After the third byte has been
transferred, the P3.3 line is taken high. The DAC can be
updated using LDAC via P3.4 of the 8XC51.
AD5764R to ADSP2101/ADSP2103 Interface
An interface between the AD5764R and the ADSP2101/
ADSP2103 is shown in Figure 43. The ADSP2101/ ADSP2103
should be set up to operate in the SPORT transmit alternate
framing mode. The ADSP2101/ADSP2103 are programmed
through the SPORT control register and should be configured
as follows: internal clock operation, active low framing, and 24-
bit word length.
Transmission is initiated by writing a word to the TX register
after the SPORT has been enabled. As the data is clocked out of
the DSP on the rising edge of SCLK, no glue logic is required to
interface the DSP to the DAC. In the interface shown, the DAC
output is updated using the LDAC pin via the DSP. Alterna-
tively, the LDAC input could be tied permanently low, and then
the update takes place automatically when TFS is taken high.
SCLK
SDIN
SYNC
DT
SCLK
RFS
ADSP2101/
ADSP2103
1
1
ADDITIONAL PINS OMITTED FOR CLARITY
Figure 43. AD5764R to ADSP2101/ADSP2103 Interface
SDO
DR
TFS
LDAC
FO
AD5764R
1
0
AD5764R to PIC16C6x/7x Interface
The PIC16C6x/7x synchronous serial port (SSP) is configured
as an SPI master with the clock polarity bit set to 0. This is done
by writing to the synchronous serial port control register
(SSPCON). See the
PIC16/17 Microcontroller User Manual
. In
this example, I/O port RA1 is being used to pulse SYNC and
enable the serial port of the AD5764R. This microcontroller
transfers only eight bits of data during each serial transfer
operation; therefore, three consecutive write operations are
needed. Figure 44 shows the connection diagram.
相關PDF資料
PDF描述
AD5764RCSUZ-REEL7 Complete Quad, 16-Bit, High Accuracy, Serial Input, Bipolar Voltage Output DAC
AD579 Very Fast,Complete 10-or 12-Bit A/D Converters(完備的10位A/D轉換器)
AD578 Very Fast,Complete 10-or 12-Bit A/D Converters(完備的12位A/D轉換器)
AD5821 120 mA, Current Sinking, 10-Bit, I2C DAC
AD5821BCBZ-REEL1 120 mA, Current Sinking, 10-Bit, I2C DAC
相關代理商/技術參數
參數描述
AD5764RCSUZ-REEL7 功能描述:IC DAC QUAD 16BIT VOUT 32-TQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1,000 系列:- 設置時間:1µs 位數:8 數據接口:串行 轉換器數目:8 電壓電源:雙 ± 功率耗散（最大）:941mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC W 包裝:帶卷 (TR) 輸出數目和類型:8 電壓，單極 采樣率（每秒）:*
AD5764SSUZ-EP-RL7 功能描述:16 Bit Digital to Analog Converter 4 32-TQFP (7x7) 制造商:analog devices inc. 系列:iCMOS? 包裝:剪切帶（CT） 零件狀態:有效 位數:16 數模轉換器數:4 建立時間:10μs 輸出類型:Voltage - Buffered 差分輸出:無 數據接口:SPI，DSP 參考類型:外部 電壓 - 電源，模擬:±11.4 V ~ 16.5 V 電壓 - 電源，數字:2.7 V ~ 5.25 V INL/DNL（LSB）:±2（最大），±1（最大） 架構:R-2R 工作溫度:-55°C ~ 125°C 封裝/外殼:32-TQFP 供應商器件封裝:32-TQFP（7x7） 標準包裝:1
AD5765 制造商:AD 制造商全稱:Analog Devices 功能描述:Complete Quad, 16-Bit, High Accuracy, Serial Input, ±5V DACs
AD5765BSUZ 功能描述:IC DAC 16BIT +/-5V QUAD 2LSB 32L RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 標準包裝:750 系列:- 設置時間:7µs 位數:16 數據接口:并聯 轉換器數目:1 電壓電源:雙 ± 功率耗散（最大）:100mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-LCC（J 形引線） 供應商設備封裝:28-PLCC（11.51x11.51） 包裝:帶卷 (TR) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:143k
AD5765BSUZ-REEL7 功能描述:IC DAC 16BIT 5V QUAD 32-TQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 標準包裝:750 系列:- 設置時間:7µs 位數:16 數據接口:并聯 轉換器數目:1 電壓電源:雙 ± 功率耗散（最大）:100mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-LCC（J 形引線） 供應商設備封裝:28-PLCC（11.51x11.51） 包裝:帶卷 (TR) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:143k
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*