參數資料
型號: AD5312
廠商: Analog Devices, Inc.
英文描述: Dual Rail-To-Rail,Voltage Output 10-Bit DACs(滿幅度電壓輸出雙10位D/A轉換器)
中文描述: 雙通道軌至軌電壓輸出10位DAC(滿幅度電壓輸出雙10位的D / A轉換器)
文件頁數: 1/7頁
文件大?。?/td> 310K
代理商: AD5312
pins (one per DAC). These reference inputs may be configured
as buffered or unbuffered inputs depending on the state of the
BUF bit. The parts incorporate a power-on-reset circuit that en-
sures that the DAC outputs power up to zero volts and remain
there until a valid write takes place to the device. The outputs of
both DACs may be updated simultaneously using the asynchro-
nous
LDAC
input. The parts contain a power-down feature
which reduces the current consumption of the devices to 200nA
at 5V (50nA at 3V) and provides software-selectable output loads
while in power-down mode. Both DACs may be powered down
individually. The parts are put into power-down mode over the
serial interface.
a
Prelim Technical Information
AD5302/12/22
FEATURES
AD5302: Two 8-Bit DACs in One Package
AD5312: Two 10-Bit DACs in One Package
AD5322: Two 12-Bit DACs in One Package
10-Pin microSOIC Package
Micro-Power Operation: 250
μ
A @ 5V (Including
Reference Current)
Power Down to 200nA@5V, 50nA@3V
+2.5V to +5.5V Power Supply
Double-Buffered Input Logic
Guaranteed Monotonic By Design
Buffered/Unbuffered Reference Input Options
Power-On-Reset to Zero Volts
Simultaneous Update of DAC Outputs
Low-Power Serial Interface with Schmitt-Triggered
Inputs
On-Chip Output Buffer Amplifiers with Rail-to-Rail
Operation
SYNC
Interrupt Facility
APPLICATIONS
Portable Battery Powered Instruments
Digital Gain and Offset Adjustment
Programmable Voltage and Current Sources
Programmable Attenuators
GENERAL DESCRIPTION
The AD5302/12/22 are dual 8, 10 and 12-bit voltage out DACs
which operate from a single +2.5V to +5.5V supply. Their on-
chip precision output amplifiers allow rail-to-rail output swing to
be achieved. The AD5302/12/22 utilize a versatile 3-wire serial
interface which operates at clock rates up to 30MHz and is com-
patible with standard SPI, QSPI, MICROWIRE and DSP
interface standards.
The references for the two DACs are derived from two reference
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood. MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
The four control bits in the 16-bit serial input word are used to
address the relevant DAC, to select the reference option and to
select the mode of operation (normal or any one of three power-
down modes).
The low power consumption of these parts in normal operation
make them ideally suited to portable battery-operated equip-
ment. The power consumption is 1.25mW at 5V reducing to
1μW in power-down mode.
The AD5302/12/22 are all available in a 10-pin
μ
SOIC package.
PRODUCT HIGHLIGHTS
1. Low Power, Single supply operation. These parts operate
from a single +2.5V to +5.5V supply and consume 0.6 mW at
3V and 1.25 mW at 5V making them ideal for battery pow-
ered applications. Since the references may be buffered inter-
nally no external reference current is required and system
power consumption is reduced.
2. The on-chip output buffer amplifiers allow the outputs of the
DACs to swing rail-to-rail with a slew rate of 1V/μs.
3. Reference pins may be configured as buffered or
unbuffered.The unbuffered option allows the reference input
to be as high as V
DD
.
4. High speed serial interface with clock speeds up to 30MHz.
Designed for very low power consumption. The interface only
powers up during a write cycle.
5. Power down capability. When powered down the DACs con-
sume 50nA at 3V and 200nA at 5V.
6. Output range of 0-V
REF
.
7. Packaged in a 10-pin
μ
SOIC package.
Prelim.D1 7/98
+2.5 V to +5.5 V, Dual Rail-To-Rail,
Voltage Output 8/10/12-Bit DACs
FUNCTIONAL BLOCK DIAGRAM
SPI
,
QSPI
are Trademarks of Motorola.
MICROWIRE
is a Trademark of National Semiconductor.
DAC
LATCH
DAC A
INPUT
LATCH
CONTROL
LOGIC
AD5302/12/22
VOUT A
VOUT B
DAC
LATCH
DAC B
INPUT
LATCH
GND
VDD
SYNC
CLK
SDIN
POW ER-ON
RESET
LDAC
VREF B
VREF A
相關PDF資料
PDF描述
AD5313BRU +2.5 V to +5.5 V, 230 uA, Dual Rail-to-Rail Voltage Output 8-/10-/12-Bit DACs
AD5303BRU +2.5 V to +5.5 V, 230 uA, Dual Rail-to-Rail Voltage Output 8-/10-/12-Bit DACs
AD5323 12-bit, 210MSPS ADC with DDR LVDS/CMOS outputs 48-VQFN -40 to 85
AD5303 ECONOLINE: RO & RE - Industry Standard Pinout- 1kVDC & 2kVDC Isolation- UL94V-0 Package Material- Toroidal Magnetics- Fully Encapsulated- Custom Solutions Available- Efficiency to 85%
AD5323BRU +2.5 V to +5.5 V, 230 uA, Dual Rail-to-Rail Voltage Output 8-/10-/12-Bit DACs
相關代理商/技術參數
參數描述
AD5312ARM 制造商:Analog Devices 功能描述:DAC 2-CH Resistor-String 10-bit 10-Pin MSOP 制造商:Rochester Electronics LLC 功能描述:DUAL 10-BIT VOLTAGE OUT DAC I.C. - Bulk
AD5312ARM-REEL7 制造商:Analog Devices 功能描述:DAC 2-CH Resistor-String 10-bit 10-Pin MSOP T/R 制造商:Analog Devices 功能描述:DAC 2CH RES-STRING 10-BIT 10MSOP - Tape and Reel
AD5312ARMZ 功能描述:IC DAC 10BIT DUAL R-R 10-MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 設置時間:4µs 位數:12 數據接口:串行 轉換器數目:2 電壓電源:單電源 功率耗散(最大):- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP,8-MSOP(0.118",3.00mm 寬) 供應商設備封裝:8-uMAX 包裝:管件 輸出數目和類型:2 電壓,單極 采樣率(每秒):* 產品目錄頁面:1398 (CN2011-ZH PDF)
AD5312ARMZ-REEL7 功能描述:IC DAC 10BIT DUAL R-R 10-MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 設計資源:Unipolar, Precision DC Digital-to-Analog Conversion using AD5450/1/2/3 8-14-Bit DACs (CN0052) Precision, Bipolar, Configuration for AD5450/1/2/3 8-14bit Multiplying DACs (CN0053) AC Signal Processing Using AD5450/1/2/3 Current Output DACs (CN0054) Programmable Gain Element Using AD5450/1/2/3 Current Output DAC Family (CN0055) Single Supply Low Noise LED Current Source Driver Using a Current Output DAC in the Reverse Mode (CN0139) 標準包裝:10,000 系列:- 設置時間:- 位數:12 數據接口:DSP,MICROWIRE?,QSPI?,串行,SPI? 轉換器數目:1 電壓電源:單電源 功率耗散(最大):- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-8 薄型,TSOT-23-8 供應商設備封裝:TSOT-23-8 包裝:帶卷 (TR) 輸出數目和類型:1 電流,單極;1 電流,雙極 采樣率(每秒):2.7M
AD5312BRM 功能描述:IC DAC 10BIT DUAL R-R OUT 10MSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:2,400 系列:- 設置時間:- 位數:18 數據接口:串行 轉換器數目:3 電壓電源:模擬和數字 功率耗散(最大):- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:36-TFBGA 供應商設備封裝:36-TFBGA 包裝:帶卷 (TR) 輸出數目和類型:* 采樣率(每秒):*